ชุดแฮนด์บาร์สแตนเลสยกสูง แบบที่ 1 เส้นผ่านศูนย์กลาง 7/8 นิ้ว

  • รหัสสินค้า: HB0001B-01
    • IN STOCK
    • Out stock

฿1,803

คะแนนวีไบค์: +18 Points

ข้อมูลการจัดส่ง

  • ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....
ถึง ThaiLand
เปลี่ยน
เลือกที่อยู่:
ThaiLand
    ค่าจัดส่ง ฿100

    จำนวน

    สินค้าแท้ 100% รับประกัน 7 วัน รับเงินคืนฟรี ราคาสุทธิ

    ใช้สำหรับรุ่น

    ดูทั้งหมด
    KAWASAKI
    250TR -06 (Carburetor models)*Processing of switch holes required|*The direction of the brake banjo and throttle holder must be changed. ZEPHYR1100 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR1100 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ESTRELLARSCustom 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID) ZRX400II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
    แสดงเพิ่มเติม
    HONDA
    CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID) CB1300 SF 03-09 *Processing of switch holes required|* Required side cap (for 18mm ID) CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID) APE 50 08-12 (drum brake) *Processing of switch holes is required APE 50 -07|08 (Carburetor) *Ape 100 (09-) only, switch hole drilling required
    แสดงเพิ่มเติม
    Others
    Universal

    รายละเอียดสินค้า

    รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

    คุณสมบัติ

    สีของแฮนด์บาร์:ดำ

    [ข้อมูลจำเพาะของแฮนด์บาร์]
    แฮนด์บาร์: เหล็กดำ/เส้นผ่าศูนย์กลางด้านนอกΦ22.2mm/เส้นผ่าศูนย์กลางด้านใน Φ18mm
    สามารถใช้สายเคเบิ้ลเดิมได้และท่อต่างๆ

    [ขนาดของแฮนด์บาร์]
    ความสูงทั้งชิ้น: 80mm
    ความกว้างของทั้งชิ้น: 730mm
    ระยะห่างตรงกึ่งกลางของตุ๊กตาสองตัว: 130mm
    โน้มไปข้างหลัง: 110mm
    มุมด้านใน: 21-องศา
    ทำมุม: 85-องศา

    รายละเอียดคำถาม


    ผลิตในญี่ปุ่น ต้นแบบ การยืนยันการติดตั้ง และการผลิตได้รับการจัดการภายในบริษัท วัสดุที่คัดเลือกมาอย่างดีจะโค้งงอและเชื่อมด้วยความแม่นยำสูง และเสร็จสิ้นด้วยการขัดสีคุณภาพสูงตามเทคนิคและความรู้ที่บริษัทได้รับตลอดหลายปีที่ผ่านมา แฮนด์จับมีความมุ่งมั่นในด้านคุณภาพและทำจากเหล็ก STKM13A ที่มีความต้านทานแรงดึง วัสดุชุบโครเมียมสีดำเคลือบสารป้องกันสนิมสองชั้นด้วยอะคริล ผลิตภัณฑ์นี้เป็นไปตามมาตรฐานความปลอดภัย JMCA

    คำอธิบาย



    คลิกเพื่อดู MONKEY Handle Holder
    คลิกเพื่อดูสีอื่น ๆ
    รายการขนาดด้ามจับปกติสำหรับรุ่นถนน 7/8 นิ้ว
    รายการขนาดด้ามจับปกติสำหรับสกูตเตอร์รุ่นอเมริกัน 7/8
    รายการขนาดด้ามจับปกติสำหรับรุ่นอเมริกา 1 นิ้ว

    คำเตือน


    *ตัวหนีบแฮนด์บาร์ (ตัวยึดหรือเสา) ในภาพไม่รวมอยู่ในผลิตภัณฑ์
    *สัญลักษณ์ขนาดใช้สำหรับเวลาแนวนอน
    *หากมีการเปลี่ยนแปลงโครงสร้างจะต้องมีการเปลี่ยนแปลง เปลี่ยนความสูงเกิน ± ความกว้าง 40 มม. ± 20 มม. จากขนาดตัวรถที่อธิบายไว้ในเอกสารยืนยันตัวรถ
    *ผลิตภัณฑ์ในภาพอาจมีสี/ประเภทอื่นๆ

    ใช้สำหรับรุ่น

    KAWASAKI
    250TR -06 (Carburetor models)*Processing of switch holes required|*The direction of the brake banjo and throttle holder must be changed. ZEPHYR1100 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ZEPHYR1100 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter) ESTRELLARSCustom 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID) ZRX400II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
    แสดงเพิ่มเติม
    HONDA
    CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID) CB1300 SF 03-09 *Processing of switch holes required|* Required side cap (for 18mm ID) CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID) APE 50 08-12 (drum brake) *Processing of switch holes is required APE 50 -07|08 (Carburetor) *Ape 100 (09-) only, switch hole drilling required
    แสดงเพิ่มเติม
    Others
    Universal
    SUZUKI
    GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps. GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GRASS TRACKER 09-12 (FI car)*You can use stock side caps. GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo. GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
    แสดงเพิ่มเติม

    ทบทวน

    4.6

    / 5

    (7 ทบทวน)

    5

    1

    1

    0

    0

    กรอง:
    เลือกดูจาก:

    สินค้าที่ดูก่อนหน้า

    มีสินค้าในสต๊อกพร้อมจัดส่ง

    สินค้าแนะนำ

    สินค้าที่เกี่ยวข้อง

    สินค้าแนะนำ

    สินค้าที่ดูล่าสุด

    New Custom Article

    ดูทั้งหมด