[How is it used? I've finished the maintenance and adjustment of XR100R, and I'm going to OffRoad course for a test run, so I'd like to check the Engine's condition as much as possible. I changed from Normal plug to Windshield IRIDIUM to make it better. How was your experience with it? Iridium plugs are still good, and the engine blows up better. It turns agilely at high rpm. I don't pay much attention to it, but it also improves fuel economy. How did it compare to other products? It performs well compared to Normal plug. [Points to note] Install with care so as not to damage the threads of the plug. You might want to have a Torque wrench. Other items that would be helpful Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer nothing special
[How is it used? The XR100R we received was immobile, so we first replaced the Plug for initial maintenance. It is safer to replace the Plug that was on, as we do not know when it was replaced. It is also reasonably priced. How was your experience with it? I think it is better to replace the plug when the engine is not running well. I will change the number of the Plug depending on the situation. How did it compare to other products? I don't know because I only use NGK. I would like to use otherManufacturers when I have a chance. [Points to note] Be careful when tightening the new Plug; Torque management should be done well to avoid damaging the Screw threads. Other items that would be helpful Torque wrench would be nice to have. Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer nothing special
Recommendation to the Carburetor setting of the Tuning engine!
[How is it used? Usually Iridium plugs are used to produce basic setting when carburetor, Exhaust System, Bore up, etc. are custom made. We purchased this Plug, which has one of the highest heat values, to use as a standard.
Was the one you received as per Image? It is the usual Plug, so it is as per Image.
Was the installation difficult? It is easy to replace with Plug wrench. However, Torque wrench is recommendation because the Washer will be crushed if it is removed and used many times.
How was your experience with it? One Up in the heat value of the Plug does not change the Large width, but it is like an insurance policy in case of an emergency, considering the heat of the Engine. Also, I don't think a heat value of 7 is necessary unless it is a Tuning engine.
[Included Parts:were they on? Nothing else special.
[Was there anything that disappointed you? Not particularly Compared to Iridium plugs, the electrodes can be revived by rubbing with Brush when they are covered, so even a little rough handling is not a problem.
▼If you have a Plug with different heat value as Stock, you can adjust it according to the temperature and Tuning, so you can recommend it.
ประสบการณ์ของคุณกับมันเป็นอย่างไร? One Up ในค่าความร้อนของปลั๊กไม่เปลี่ยนความกว้างขนาดใหญ่ แต่เหมือนกับกรมธรรม์ประกันในกรณีฉุกเฉินโดยคำนึงถึงความร้อนของเครื่องยนต์ นอกจากนี้ ฉันไม่คิดว่าค่าความร้อนที่ 7 จำเป็น เว้นแต่จะเป็นเครื่องปรับแต่ง
[How is it used? I purchased this Plug, which has one of the higher heat values, for use in EngineFull tuneCustom vehicles such as carburetor, Exhaust System, and Bore up.
Was the one you received as per Image? It is as per Image since it is a Plug that I am familiar with on a regular basis.
Was the installation difficult? It is easy to replace with Plug wrench.
How was your experience with it? To be honest, we cannot expect power up only from the heat value of the Plug, but it is like an insurance policy considering the heat of the Engine. I also believe that the Tuning engine must be used to get the true Performance.
[Included Parts:were they on? There is nothing else.
[Was there anything that disappointed you? Not particularly Iridium plugs are a bit more delicate than normal plugs because they cannot be brushed to restore the electrode when covered.
▼It would be good to have Iridium plugs with different heat values as Stock, so that you can easily change them depending on the temperature and Tuning.
I buy this as a consumable for my APE100, which I ride to work every day. I have been replacing them every 5,000?yen or so, but the cost performance is very good, and I am riding comfortably using the new ones more and more. The cost performance is very good, and I am riding more and more comfortably with the new ones.