SUZUKI COLLEDA125 - Webike Thailand


In accordance with the regulation change in Japan, it increased its engine displacement volume from 90cc to 125cc. COLLEDA ST 125cc was also added to its line.

ขนาดเครื่องยนต์ 123
แรงม้าสูงสุด 4.5ps(3.0 kw)/5000rpm
แรงบิดสูงสุด -
น้ำหนักรถสุทธิ(รวมอุปกรณ์) - kg
ความจุถังน้ำมัน - ลิตร



    I used it for kitaco VM26 setting.
    Moreover, I will worry ....
    carrying out carburetor play comfort -- already .

    It chose by appearance.
    A portion black when grasping is collapse.

    Aprilia RS125 MY08 Although IW01-31 (an equivalent for NGK No. 10) is usually used for racing chamber specification, only a winter season raises the main jet No. 1, and is using IW01-29 (an equivalent for NGK No. 9).

    Off Car Exterior Replace with Cowl's H4 Bulb.

    Off There is almost no Space behind Light if there is a car, buying this product because the fan on the Connector side does not fit well.
    When I looked at the LED from the front, I was worried that the light would go forward ahead, but it was dazzling when I saw it from the front after installation.
    Although it was said that the head was not rigidly attached by the other person's review, it was able to be installed without problems.

    It is unknown how bright it is because I do not run at night, but I am expecting Large as I was not flickering at Idling like Mr. Halogen.
    And how long is the life span.

    In the case of the SR 400 OEM's Reserve tank integrated Master cylinder, Parts itself will inevitably become Large, so Handlebar replacement etc etc. , Custom around the Handlebar may interfere with fine adjustment of the positional relationship of each part. As this product is separate from the Reserve tank, compared with OEM, the degree of freedom of the installation position is high, it is a nice point for the Custom faction.

    By the way, Brake's Fing Ring itself changes obviously compared to OEM.

    OEM 's Master cylinder is early Touch, the rise of braking is relatively strong and it is clearly clear, there is no change in braking force which is too large even if gradually grasping from there, a certain pressure is applied Wherever, it was Fei Ring that seemed to work strongly, but I did not like it much.

    On the other hand, this product often says "Linear" It is effective. The braking force rises to Smooth by the grasping amount. I think that the diameter of Master cylinder may be different from OEM, but obviously the controllability has improved.

    Of course, I think that adjustment can be done by characteristics of Brake line and Pad, so it is only comparison with Master cylinder.

    Also, the Lever position adjustment mechanism of the Dial formula, which is not found in the OEM, was delightful. It can be adjusted in a moment without tools.

    Wiring processing of Brake switch is necessary, but it is not so difficult task, so if you are familiar with terminal processing work, Wiring processing will end within 5 minutes.

    ROYALSTAR1300 (VXZ13AT) I tried to equip it. I feel brighter than before, but since I have not traveled at night, I write the comments next time.

    ? 【What made you decide the purchase?】
    Reliable Brand's NGK. Plug is also NGK so I think that compatibility is also Large.

    ? 【How was it actually used?】
    Motorcycle is old, I feel that Torque has improved in general. Power comes with Axel.

    ? 【Was it difficult to install? (Hard parts case)】
    Work to uninstall Tank and Radiator to remove Ignition coil was quite troublesome. Once you remove the Ignition coil, the code installation work is relatively easy.

    ? 【Please tell me the point of installation and hang (in the case of Hard parts)】
    I straightened this cable from the root of the OEM's Plug cord from the Ignition coil, so I had the power to screw it into the Ignition coil because it was thicker than the OEM code.

    ? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any

    ? [Is there anything I was disappointed about?]
    There is no particular problem.

    ? [Request to Manufacturer - Please let me know if you have any improvement points]
    I would like you to match the thickness of the approximate OEMPlug cord.

    ? 【Have you compared items?】
    Norogy's Hot wire

    ? [Others]
    Confirmation and adjustment are necessary so that the amount of Oil and the amount of fuel do not become thin as much as the combustion efficiency improves.

    It took the Engine to the KICK 2 or 3 times, but after mounting it was almost one shot ok became the most effective!
    I could not really feel the effect like the item description of Others, but I feel like I'm feeling somewhat better with a feeling of being?
    Afterwards, the appearance is exchanged in any way It is good that the feeling is strong.
    Strictly speaking, if you cut the OEM code according to the instructions, the position of the Connecting Connector will be in a difficult position to restore, so I thought that it would be better to do it in the field.