A dual-purpose model equipped with an OHC 2 valve single cylinder engine with a mission six-speed based on FTR.A slim steel pipe semi-double cradle frame combines a conventional erecting fork, an aluminum swing arm, and a pro link suspension, and the seat height is set to 805 mm and the steering wheel turning angle is also set to 51 degrees on the left and right respectively, various situations We pursue thoroughly the ease of handling in.Equipped with aluminum handles bar made by British Rensal company, strong mischievous lock, optional immobilizer alarm and pre-wiring for installing an alarm kit, the equipment aspect also emphasizes the quality.The 2008 model clears exhaust emission regulations by reviewing the carburetor setting and incorporating a catalyzer in the exhaust pipe and muffler.The stripe design of the tank shroud has been redesigned, and the front and rear wheel rims have been changed from black to gold.
Up HandlebarREBEL (1996 formula) Mounting on.
Since there is no manual, I consulted the image on the web.
There is only Universal type and the degree of freedom of installation is high.
Adjust front / back angle of Screen with Color of Screen side, Quantity of Screen at Color of Handlebar Bracket side : Pair (for Left and Right) Adjustment, HandlebarClip can adjust the whole up and down. And apart from these, you can adjust the screen height to 3 levels.
Because it is a Universal type Meter - It applies to the sense of unity with the surroundings, but of course there are windbreak effects.
If you make a fault,
Screen size is (Height) You may make a little more Small.
Bracket is too long to be extra.
Is it about?.
? 【What made you decide the purchase?】
Price and Universality.
? 【How was it actually used?】 Required
The wind hitting the body will be less, but because of the involvement from the upper edge of Screen, the wind that hits Helmet is quite disturbed and the head is shaken.
? 【Was it difficult to install? (Hard parts case)】
Installation is easy, it will not take as long as an hour.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
The Clamp to be attached to the Handlebar needs to tighten the tightening Bolt considerably, but the Clamp itself is not so rigid and it is possible to fix the mounting position.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
? [Is there anything I was disappointed about?] Required
I thought that we could let the wind go a little more, but the head is rather a feeling of wind.
? [Request to Manufacturer - Please let me know if there are any improvement points】 Required
Rust of screws will come soon. I want you to raise the rust resistance a little more.
? 【Have you compared items?】 Required
There were almost the same products in World Walk, but this one was cheaper and purchased here.
I temporarily lost some of the parts at the time of temporary fixation, but as soon as I contacted Manufacturer, I sent the same parts. After Follow was very good.
Since there is no Instruction Manual, the part to be attached to the Handlebar was attached for the gathered part, but it is loose even if you tighten it or tighten it, because Screw is heavy use, it will wobble even in the temporary pair, even when Screw of the Shield part is honed and loose , This product is only for Shield, Gold items are useless.
When I traveled on a highway with ETC attached, I installed it because there was a lot of wind pressure.
It's not so difficult to fix it to the Handlebar.
Impression that I wore and traveled on a highway obstructed the wind from the chest to the neck so it became a little easier.
As a problem, I think that the gold tool is easy to rust so I can Plating it.