HONDA CT50 Motra - Webike Thailand

HONDA CT50 Motra

It had a large carrier that could efficiently load the luggage when used for recreational purpose. It had a rear suspension with a levelizer and a subtransmission. It also featured ultra-thick balloon tires.

ขนาดเครื่องยนต์ 49
แรงม้าสูงสุด 4.5ps(3kw)/7500rpm
แรงบิดสูงสุด 0.46kg・m(4.5N・m)/5500rpm
น้ำหนักรถสุทธิ(รวมอุปกรณ์) 86kg
ความจุถังน้ำมัน - ลิตร

120 รายการ

สินค้าแนะนำสำหรับ

รีวิวสินค้าของ

สะดวก รวดเร็ว สินค้ามีคุณภาพ บางสินค้ามาไว ไม่ต้องรอนาน หากสินค้าไหนนานจะมีทีมแอดมินโทรแจ้งสถานะสินค้าให้ทราบ ตอบไวมากค่ะ

สินค้ามีโอริงชาวยเก็บน้ำมันหล่อลื่นอายุการใช้งานยาวนานกว่าโซ่ปกติ

ตัวสินค้าดี โซ่ตัวนี้มี o-ring ช่วยเก็บน้ำมันเหมาะกับคนที่ต้องการใช้โซ่ที่ทนมีอายุการใช้งานที่ยาวนาน

สินค้ามาเร็วกว่าที่แจ้งไว้ สินค้าเป็นของแท้

เปลี่ยนง่าย ให้สายมายาวสมราคาใช้แล้วรู้สึกถึงความนิ่มนวนในการจ่ายไฟมากยิ่งขึ้น

It is better to be purchased after checking conformity well since a cub changes the form of the piston of a bore up kit by a model.
Wearing is very easy and a special tool in particular does not need it, either.
It can work, even if a description is also polite and it does not take down an engine.
And after carrying out bore up, it ran about 300 km, but so so, there is also torque and it is easy to run it.
When bore up was carried out, the piston became heavy, and since the maximum high speed did not come out of whether high rotation comes to be hard in the surroundings from the time of 50 cc by a pure sprocket, F sprocket was made into 16 dishes.
however -- still -- the maximum high speed -- 70 km/h -- just for a moment .
A high cam may also be needed if bore up is carried out.
But surely torque becomes strong and bolt-on is opened wide from two-step right-turn and 30-km/h regulation by registering two sorts.
Although the goods themselves were very good, since 笆ウ mark attached to the rear fender which will follow if you buy the bore up kit of the manufacturer of the other company was not attached, they are four stars.
In the direction which has ridden on a 50-cc cub by Ho who usually has license of two or more flowers, it is recommended by all means.

It is better to be purchased after checking conformity well since a cub changes the form of the piston of a bore up kit by a model.
Wearing is very easy and a special tool in particular does not need it, either.
It can work, even if a description is also polite and it does not take down an engine.
And after carrying out bore up, it ran about 300 km, but so so, there is also torque and it is easy to run it.
When bore up was carried out, the piston became heavy, and since the maximum high speed did not come out of whether high rotation comes to be hard in the surroundings from the time of 50 cc by a pure sprocket, F sprocket was made into 16 dishes.
however -- still -- the maximum high speed -- 70 km/h -- just for a moment .
A high cam may also be needed if bore up is carried out.
But surely torque becomes strong and bolt-on is opened wide from two-step right-turn and 30-km/h regulation by registering two sorts.
Although the goods themselves were very good, since 笆ウ mark attached to the rear fender which will follow if you buy the bore up kit of the manufacturer of the other company was not attached, they are four stars.
In the direction which has ridden on a 50-cc cub by Ho who usually has license of two or more flowers, it is recommended by all means.

It could come to attach a power rev to the dax, and is very much satisfied.