HONDA Rebel 300 ท่อไอเสีย
Equipped with 286 cc DOHC single cylinder engine, both express pleasure to open pulse feel and throttle by optimizing FI setting. I use a frame completely different from the old model.Since it has been renewed to have a truss structure that partly surrounds the engine, the stability of the car body should also be high.
HONDA Rebel 300 ท่อไอเสีย ข่าวที่เกี่ยวข้อง
Although the same Besla 's Resin pad was installed close to a new article with almost no decrease, Fei Ring was bad for anything, and at the beginning Caliper and OEMMASTER pushed one after the other though I thought it was such a thing,
Even if Atari is not working as a trial, both braking performance and fee Ring have been upgraded to Large width. Dust is also less than Resin.
It is a Manufacturer that has a track record at Race in own production and can be trusted, so if you do run like a Sports run or a load as it is, it is a Recommendation.
I bought it with Mirror exchange of the 2017 year Grom, but ...
I installed Style fun and cool.
The installation of the car body was installed snugly.
It is only the ground that you can adjust the angle of Mirror.
The angular width is small to turn it upwards, and I do not add it at all.
For two days I worried about various good ideas but abandoned it.
It will not be a shame.
It is my first exchange since I got on a new car. I am amazed by NORMALPad with about 30,000 km. Because I attached Red Pad with a different Motorcycle, I decided without comparing with others in particular. I feel that NORMAL's Rotor is bad, but it seems to be bad, but the credibility is better than NORMAL. I do not know Cost performance yet
Plus side : Price is cheap, around (grip) Soft, I think that it is good not to get stiff even in cold weather, individuals with many vibrations.
Minus surface : Grip becomes thick (About Grip heater included) So, for those who are Small in hands, depending on the angle of Handlebar, the thickness increases, Lever and Handlebar (Core of) There is a possibility that the thing may feel distant and it may be difficult to walk around so I think that the evaluation will break up.
Because my FUSION can not adjust the angle for Normal handle, I felt it slightly upward more than to Upright (Feeling holding down from above) became.
Because it is a Scooter which does not hold down even Positionally, the difference of several millimeters is sensuously pretty much Large.
Recommended for those who can adjust Handle position based on the thickness of Grip.
On the other hand, Direct feeling of Handlebar becomes thin, so I feel dull when I turn around.
BONNEVILLET100 (Air cooling model) I installed it in Front of.
Caliper and disc are still NORMAL.
The Pad I have used up to now is OEM → Bethra METAL → RKMega alloy → Metallica Normal specifications → PROJECT μ μSpital METAL this time.
BONNEVILLE 's Front brake is ineffective, so I tried Pad replacement for the braking force but Vesla and RK were almost unchanged from OEM, Metallica Normal specificationsPad was quite effective and satisfied.
Just saying it works well, I was looking for a Pad that can be full Brake even with a slightly weaker force, when I was in full Brake, I needed to grab Lever with a lot of strength..
Metallica Normal specifications or better Pad is a thing of for Race, but RacePad that can be used for BONNEVILLE's one-touch 2 PODCaliper did not exist but it was giving up, but Brake Pads's Lineup When I was looking out at the bot, I caught this Pad by chance.
Although it seems to be a famous Manufacturer for 4 wheel Brake Pads, the popularity of Pad for two wheels seems to be different as it seems to be, as there is not much information found even in the Net, there was also a bit uneasy but it is used for Normal caliper of BONNEVILLE It is possible to for RacePad so I tried buying it unexpectedly.
The thickness of the back plate is about 4 mm as same as Metallica, and Edge of Plate may be Laser cut perhaps because it is sharp like Metallica.
Braking force when Pad is cold is the same as Metallica Normal specifications.
I think that it will not warm up in town unless deliberately repeating full Brake.
Running at high pace at Winding and warming up Pad will demonstrate braking power over Metallica NORMAL.
If you attach RacePad to a regular Motorcycle, it seems that it may be difficult to get on in public roads because it is too effective, but Brake of BONNEVILLE is so effective that I finally got this Pad and it looks like a normal Motorcycle.
I do not feel difficult to get on because it exerts the braking force as much as I grasped Metallica.
I thought about replacing Caliper and disc but thought that this Pad was enough for running public roads.
Just my BONNEVILLE is exchanged for Radial master, Front fork spring is also exchanged for Other Company Product, and Fork oil's oil level is also adjusted so you may get a different impression from Full normal car body.