Please login to check coupons
Product Detail
Specification
Spec 3For front
For 1 caliper
Stainless steel disc, cast iron disc
Caution
*There may be changes in product specifications due to the manufacturer's reasons.*Be sure to read and understand the important safety instructions before using the product.Please keep this important information in a place where you can read it at any time after reading it.
*Do not modify the brake buds or install them on bikes other than those for which they are designed.
*Brake calipers, pads and rotors after driving are extremely dangerous due to high temperatures.
*Always replace the brake pads with new ones when the remaining friction material is less than 2.0mm.If the remaining friction material is less than 2.0mm, the disc rotor and caliper may be damaged.
*Disc rotors are also a consumable item.In addition to normal wear, be sure to replace the disc rotor with a new one if there is uneven wear or distortion.
*Brake feeling will change after replacing the brake buds.Do a familiarization run until you get used to it.
*Depending on the model, it may be necessary to remove the pad springs.
*Do not use if the clearance between the caliper and pad cannot be obtained depending on the model.
*Some models may require a chamfer.
*Auto Studio Skill is always researching, developing and improving our products in order to deliver higher performance and safer products.Therefore, the specifications may be changed without notice.
*Replacement of brake pads should be carried out by a qualified dealer.
*The brake fluid should be replaced at the same time as the brake pads.Use of old or dirty fluid can cause paper lock and is very dangerous.
*When pushing back the brake caliper pistons, be aware that fluid may overflow from the brake master tank.If fluid leaks, wash it off immediately with water as it may cause peeling or deterioration of the paint if it adheres to the painted surface.
*Before each run, be sure to grip the lever several times to check the touch of the lever, and check and confirm that there is no abnormality in any part before running slowly.
*This product should be used only in Japan.(For Japanese standard only)
*We are not responsible for any damage or injury caused by neglecting the precautions or after installation.
