Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
LX 125 With rear BOX
LX 150 With rear BOX
Prima Bella 125 With rear BOX
LX 50 With rear BOX
Prima Beulah 150 With rear BOX
Show more
GP125i With rear BOX
GP125i VCBS With rear BOX
RACINGS125 With rear BOX
RACINGS150 With rear BOX
Show more
OvidIII 50 With rear BOX
OvidIII 125 With rear BOX
Product Detail
Specification
Material:Polyester100%Fabric Type:150 denier Ox fabric
Size:L-BOX
Country of Origin:CHINA
Description
Motorcycle Cover in two colors for easy front/rear identification, finished in 150 denier thick weave Ox fabric
Weight
The front and rear of the cover can be checked at a glance by using the keyhole on the cover..
Red color on the front wheel side and Yellow color on the rear wheel side.
(*Silver models are identified by the color of the gusset at the back of the CoverBody (Black)..
Ventilation for draining moisture from inside the cover...Ventilation in the handlebar section efficiently drains moisture from inside the cover..
Center belt that can be opened and closed from either side...Motorcycle can be stopped in either directionQuantity:Pair (for Left and Right)BuckleSpec that can be opened and closed from either side.. Center belt of.
Usage and Care
Please be careful not to hang the Cover on a vehicle that has been wet by rain or car wash, etc..
Friction is created between the water remaining on the car body and the adsorption of the lining of the cover, and small gravel and fine garbage, etc., are removed.. If the car is damaged by water, garbages, gravel, etc., it may cause scratches on the car.. We recommend that you remove the.
Avoid using Cover during strong winds such as typhoons and storms.
Covers may cause scuffs and scratches due to flapping and flapping, and may cause the motorcycle to fall over..
If you choose to install it to protect your motorcycle from flying debris, please do so at your own risk..
Wind flapping, including strong winds, can cause the paint film to peel off or scratch the car body..
Covers that get wet in the rain do not dry quickly, so please remove them from the car body and dry them completely before reuse..
If the ground is still wet after the rain has stopped, condensation inside the Motorcycle may damage the painted surface of the Motorcycle and stain the Gold surface..
The temperature difference between the inside and outside of the cover may cause moisture inside the cover, so please remove the cover periodically for ventilation..
Water-repellent spray can also be applied after drying to extend the life of the cover..
Weight
The front and rear of the cover can be checked at a glance by using the keyhole on the cover..
Red color on the front wheel side and Yellow color on the rear wheel side.
(*Silver models are identified by the color of the gusset at the back of the CoverBody (Black)..
Ventilation for draining moisture from inside the cover...Ventilation in the handlebar section efficiently drains moisture from inside the cover..
Center belt that can be opened and closed from either side...Motorcycle can be stopped in either directionQuantity:Pair (for Left and Right)BuckleSpec that can be opened and closed from either side.. Center belt of.
Usage and Care
Please be careful not to hang the Cover on a vehicle that has been wet by rain or car wash, etc..
Friction is created between the water remaining on the car body and the adsorption of the lining of the cover, and small gravel and fine garbage, etc., are removed.. If the car is damaged by water, garbages, gravel, etc., it may cause scratches on the car.. We recommend that you remove the.
Avoid using Cover during strong winds such as typhoons and storms.
Covers may cause scuffs and scratches due to flapping and flapping, and may cause the motorcycle to fall over..
If you choose to install it to protect your motorcycle from flying debris, please do so at your own risk..
Wind flapping, including strong winds, can cause the paint film to peel off or scratch the car body..
Covers that get wet in the rain do not dry quickly, so please remove them from the car body and dry them completely before reuse..
If the ground is still wet after the rain has stopped, condensation inside the Motorcycle may damage the painted surface of the Motorcycle and stain the Gold surface..
The temperature difference between the inside and outside of the cover may cause moisture inside the cover, so please remove the cover periodically for ventilation..
Water-repellent spray can also be applied after drying to extend the life of the cover..
Caution
*Although the surface of the fabric is coated with water repellent, it is not completely waterproof, so it may be dyed depending on the amount of rain and usage conditions.*Please note that the waterproof performance of the product may deteriorate significantly over time depending on the environment in which the product is used.
*Do not use on repainted vehicles. Depending on the conditions, there is a possibility of damaging the painted surface due to chemical reaction.
*This product is not flameproof, so please be careful with fire. Also, please note that this product will melt if it comes in contact with the engine or muffler during high heat.
*This product is not compatible with windshield-equipped vehicles. Please protect the shield part in advance and install at your own risk.
*Please note that the flapping of the cover may cause very small scratches on the delicate parts of the bike (painted or plastic parts).
*Osaka Textile Material's motorcycle covers are general-purpose products. (It is not a product exclusive for a car model.) The degree of fitting varies depending on the car model.
*Specifications and dimensions of the motorcycle cover are subject to change without notice.
*Due to the sewing process, there may be a slight deviation in the cover dimensions.
*The size chart is for reference only. Please refer to the actual size of the motorcycle cover in case the model is not listed in the chart, or in case you have your own preferred size. In case of modification of handlebars, front forks, swing arms, etc., the motorcycle cover may not fit.
*The cover for the rear box is only compatible with vehicles with a top case. It is not compatible with vehicles with side/pannier cases.
*L-BOX is designed for 30L class (up to 36cm width) and 6L-BOX is designed for 50L class (up to 56cm width) top cases, but it may not fit cases with special shapes.
*Image may include other coloring and products.
*Please note that the product specification may change due to manufacturer reasons.
Applicable Models
LX 125 With rear BOX
LX 150 With rear BOX
Prima Bella 125 With rear BOX
LX 50 With rear BOX
Prima Beulah 150 With rear BOX
Show more
GP125i With rear BOX
GP125i VCBS With rear BOX
RACINGS125 With rear BOX
RACINGS150 With rear BOX
Show more
OvidIII 50 With rear BOX
OvidIII 125 With rear BOX
D Tracker 125 With rear BOX
KSR With rear BOX
Z125 With rear box, comfortable seating
Show more
Swish LIMITED With rear BOX
LETS II With rear box, comfortable seating
Address With rear BOX
swish With rear BOX
BIRDIE With rear box, comfortable seating
Show more
Axis Treat With rear BOX
BW's50 With rear BOX
BW's100 With rear BOX
BW's125 With rear BOX
CYGNUS With rear BOX
Show more
BENLY50 With rear BOX
SUPER CUB With rear BOX
ZOOMER With rear BOX
LEAD With rear BOX
Dio With rear box, comfortable seating
Show more
Model Page Links
Review
0.0
/ 5
(0 Review)
