Wide swingarm with extra thick hexagonal cross section After 2 years of development, GM-MOTO has completed the wide swingarm for MONKEY.Of course, it is made by KEPSPEED, a high precision machined aluminum product. The wide width is 220mm wider than the standard width by 2.5cm on both sides.In addition, wide hubs, wide suspension, drive sprocket offset kit and 5.5J 3 piece aluminum wheels are also developed and released as a complete kit. This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
Caution
[Notes on purchase] *All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas. [About the installation] The rear brake master cylinder fixing bracket is not included in the kit.Please prepare separately.The drive sprocket offset kit requires the sprocket section of the generator cover to be cut off.However, some Chinese engines such as Lifan 150cc may not be able to support 4 points.
Please use the 420 size sprockets for Monkey.Assembly instructions will be included.Please refer to the instruction manual and assemble carefully.However, common sense techniques for maintenance work are not described in the manual.Experienced motorcycle mechanics are required to perform the assembly work.The number of frames of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
Even when the rear suspension is at full bottom, be sure to check for any abnormal contact points before driving.If there is a gap of 0.5mm or more between the frame and the swingarm, please use washers to reduce the gap.If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.After the start of driving, pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to prevent unexpected problems. *Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems. ※ The chain adjuster and the stand hook have been changed from gold to titanium color. *There may be changes in product specifications due to the manufacturer's reasons.
