Set contents Disc lock body x 1 Dedicated key x 3 Hexagonal wrench x 1 CR2 lithium battery x 1 Instruction manual x 1 Security wire x 1 Adapter x 1
Description
[Disc lock] ■It is a compact yet very strong disc lock with a strong stainless steel body and a strong key barrel that is directly attached to the brake disc rotor. ■When vibration such as moving the bike body is detected, a piercing alarm with a loud volume of 120dB will sound, and this product is effective in preventing theft of your bike. ■In addition to waterproofing, the disc lock body has a special surface treatment that gives it a luxurious finish. ■The alarm can be switched on and off, so when you want to turn off the alarm, such as when you are on the move, you can prevent the alarm from malfunctioning due to vibration, so you can take it with you when you are out and about. ■The alarm battery is a CR2 lithium battery.(This product can be used for about 10 months)
[How to switch on/off] ■If you hear a single short "beep" sound when you press the lock button, you will hear a notification sound a few seconds later indicating that the security alarm is in the ON mode. ■If you hear two short "beeps" when you press the lock button, the security alarm will be turned off. *The alarm is deactivated by unlocking and raising the key barrel.
[How to install the battery] 1. Remove the disc lock unit and disc insert bolt with the attached hexagonal wrench. 2. Remove the bolt and the cover will come off. 3. Install the supplied batteries into the alarm unit. 4. Attach the cover and you are done. *If you use a hexagonal wrench, the sensor that detects the brake disc may react and make a sound.
[security wire] ■The total length is about 150cm, so you can lock it to a pole or fence for further security effect. ■When not in use, it is compact and easy to carry around without being bulky. ■It can be used not only as a motorcycle lock, but also as a helmet lock or a reminder cable to prevent forgetting to remove the disc lock. ■The entire cable has been coated with a resin coating to prevent scratches on the bike. ■The loop molding part tends to lose its strength, but this part is made thick with a diameter of about 20mm, so it cannot be destroyed easily.
[disc lock adapter] ■This is a disc lock adapter for KS6 to achieve further security effect. ■The adapter can be used to combine the disc lock with a security wire or lock chain. ■The thickness of the stainless steel is approximately 11mm, making it durable and rustproof.
Caution
*Please check the size of the brake disc on your motorcycle. *The image may contain other colorings. *There may be changes in product specifications due to the manufacturer's reasons.
