Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Product Detail
Specification
[Specifications] 8 inches for stock stepDescription
This is a disc brake kit for the 8 inch stock step.
■Details
For stock step, it is possible to use the stock step and rear brake pedal as it is, and to use the rear disc.
The use of a wheel hub with a built-in large-capacity damper greatly reduces the load applied during drive and back torque.
・Wheel hub with damper
The damper with a built-in wheel hub absorbs the torque applied to the wheel hub during acceleration and deceleration and the impact during gear shifting, reducing the load on the engine, clutch and transmission.
In addition, the damper reduces the large amount of back-torque generated by the engine that has been customized for higher output.
The rear brake performance is also improved by using disc brakes, which provide excellent braking power.
・The disc rotor hub and damper hub are made of die-cast aluminum
Die-cast aluminum is used to increase strength and rigidity while reducing weight!!!
Barrel polishing on the surface enhances the dress-up effect and creates a beautiful look around the wheel.
・Φ150 stainless steel rear disc rotors
Stainless steel is used for its high durability and resistance to rust.
・Large capacity damper rubber is adopted
The original high-capacity damper rubber greatly reduces the load on the drive and back torque.
In addition, the damper rubber is highly durable and wear-resistant.
・Rigid mount caliper bracket
The rigid mount type is fixed by inserting the bracket into the protruding part of the swingarm.
■Details
For stock step, it is possible to use the stock step and rear brake pedal as it is, and to use the rear disc.
The use of a wheel hub with a built-in large-capacity damper greatly reduces the load applied during drive and back torque.
・Wheel hub with damper
The damper with a built-in wheel hub absorbs the torque applied to the wheel hub during acceleration and deceleration and the impact during gear shifting, reducing the load on the engine, clutch and transmission.
In addition, the damper reduces the large amount of back-torque generated by the engine that has been customized for higher output.
The rear brake performance is also improved by using disc brakes, which provide excellent braking power.
・The disc rotor hub and damper hub are made of die-cast aluminum
Die-cast aluminum is used to increase strength and rigidity while reducing weight!!!
Barrel polishing on the surface enhances the dress-up effect and creates a beautiful look around the wheel.
・Φ150 stainless steel rear disc rotors
Stainless steel is used for its high durability and resistance to rust.
・Large capacity damper rubber is adopted
The original high-capacity damper rubber greatly reduces the load on the drive and back torque.
In addition, the damper rubber is highly durable and wear-resistant.
・Rigid mount caliper bracket
The rigid mount type is fixed by inserting the bracket into the protruding part of the swingarm.
Note
・Webike Thailand is an official distributor of SP Takegawa in Thailand.
・Products purchased from Webike Thailand are covered by the product warranty specified by SP Takegawa.
・Products purchased from Webike Thailand are covered by the product warranty specified by SP Takegawa.
Caution
*The rear sprocket used is for 12V Monkey.*Driven sprockets lower than 28T cannot be installed.
*This product cannot be installed with stock exhaust at the same time.
*If you want to use the stock wheel, you need to purchase 3mm spacer separately.
*Please check the parts to be purchased separately before purchasing.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Installation requirements*
■8-inch vehicles with a stock or 4cm long swingarm.
■Target clutch cover
・Stock clutch cover
・Diecast clutch cover made by SP Takegawa
・Special Clutch Cover TYPE-R
・Dry Clutch Cover TYPE-R
・17 dry clutch cover TYPE-R
*This product cannot be installed on vehicles equipped with SP Takegawa sand casting special clutch cover, sand casting dry type clutch cover, or primary type kick starter engine.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
Applicable Models
Model Page Links
Review
0.0
/ 5
(0 Review)
