Product Description ・Top Bridge ・Handle Post ・Meter and key box bracket ・Top cap bolt ・SSITO Emblem
Description
This is a pipe handle top bridge for GPz750 and Turbo.
This is a replacement for the stock top bridge.(Offset 50mm) Handle lockable No indicator
Point (1) 10mm wing shape If the air passage of the inner tube is welded, it is possible to adjust the thrust out and thrust back, which is not possible with the GPz750 standard or flat top bridge.
(2) Distance between meter and key box The position of the meter and the key box has been moved to the front to balance the appearance. The installation of the meter is more difficult than the stock one, but if you assemble it carefully, you will have no problem.
(3) M5 Service Hall If the top bridge is replaced, the stock indicator cannot be installed. There are two M5 threads on the front of the top bridge for attaching an indicator.
(4) Handle post height If the height of the handlebar post is too high, it will be higher than expected when you want to install a low handlebar. The handlebar post height is set as low as possible so that you can choose your preferred height on the handlebar. The height from the top cap bolt (hex nut 24mm wide on 2 sides) to the handle is set at 14mm clearance. The height is just barely high enough to allow retightening with the handle attached.
Caution
*If the top bridge is replaced, the stock indicator cannot be installed.There are two M5 threads on the front of the top bridge for attaching an indicator. *The inner tube cap bolt shown in the image is sold separately. *Images may contain other colors. *There may be changes in product specifications due to the manufacturer's reasons.
