Please login to check coupons
Product Detail
Specification
Clutch Spring retainer for YAMAHA DT200R (85-90), DT200WR, Lanza, SDR, DT125 (91-99), TZ125 (94-00), YZ85 (all years)5 retainers (A2011 or A6061 (aluminum alloy) blue anodized finish), 5 Chrome-moly bolts, 1.0mm x 10 washers for strength adjustment
Description
This part suppresses abnormal vibration from the clutch spring and improves the operating accuracy.
Effect
・Smooth disengagement of the clutch.
・The connection is secure without slipping.
・It makes it easier to do up front!
・The friction loss is also reduced and the grip becomes lighter.
・ Judder reduction.
・Improved durability of the disc.
O-washers can be used for fine adjustment of strength.
When installed, it works more like a machine designed to work.
It is very effective for the bike which has a problem here, slipping or bad touch.It can be made heavier or lighter.
The spring and the pressure plate make it difficult to cause vibration.
By adding a washer, you can fine-tune the strength of the connection grip.
Assume the stock steel hold down is 0.
The 'Workshop Kitamura' type is reinforced by 1.0mm without washer.Same as stock with one washer.Weakened by 1.0mm when two sheets are inserted.
It is low in height, so it does not interfere with the case cover.
Mounting Method
1, If necessary, put the washer on the post of the boss or in the retainer where the bolt is inserted.You can grease it.
2, Insert the retainer with the spring and bolt.
3, Tighten the bolts temporarily, and then tighten them diagonally after all five bolts are in place.The tightening torque is 6N・m 0.6kg ・m specified by the manufacturer.It's very loose and won't come loose.
Photo Description
1, Set Contents.
2, With the retainer made by Workshop Kitamura inserted into the clutch body.
3, Hold the spring so that it does not vibrate.
4, No washer.It is 1mm stronger than stock.
5, Washer 1pc.Same strength as stock.It just runs smoother and is lighter.
6, Washers 2pcs.1mm weaker than stock.It's lighter, but we think it connects better than stock.
7, As the power increases, the number of springs is increased and the number of discs is increased.
Effect
・Smooth disengagement of the clutch.
・The connection is secure without slipping.
・It makes it easier to do up front!
・The friction loss is also reduced and the grip becomes lighter.
・ Judder reduction.
・Improved durability of the disc.
O-washers can be used for fine adjustment of strength.
When installed, it works more like a machine designed to work.
It is very effective for the bike which has a problem here, slipping or bad touch.It can be made heavier or lighter.
The spring and the pressure plate make it difficult to cause vibration.
By adding a washer, you can fine-tune the strength of the connection grip.
Assume the stock steel hold down is 0.
The 'Workshop Kitamura' type is reinforced by 1.0mm without washer.Same as stock with one washer.Weakened by 1.0mm when two sheets are inserted.
It is low in height, so it does not interfere with the case cover.
Mounting Method
1, If necessary, put the washer on the post of the boss or in the retainer where the bolt is inserted.You can grease it.
2, Insert the retainer with the spring and bolt.
3, Tighten the bolts temporarily, and then tighten them diagonally after all five bolts are in place.The tightening torque is 6N・m 0.6kg ・m specified by the manufacturer.It's very loose and won't come loose.
Photo Description
1, Set Contents.
2, With the retainer made by Workshop Kitamura inserted into the clutch body.
3, Hold the spring so that it does not vibrate.
4, No washer.It is 1mm stronger than stock.
5, Washer 1pc.Same strength as stock.It just runs smoother and is lighter.
6, Washers 2pcs.1mm weaker than stock.It's lighter, but we think it connects better than stock.
7, As the power increases, the number of springs is increased and the number of discs is increased.
Caution
*The video shows the detail for Serow 225 and Serow 250.*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
