Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
TOYOTA 200 Series High ace 2WD
Product Detail
Specification
[Set components]・Front Bump Stopper
・Rear Bump Stopper
・Revamp stopper
・Stopper angle plate
・Adjusting plate
Installation Difficulty: 4
Description
No compromise in pursuit of ride comfort!The three sacred treasures that continue to evolve
The stock stopper that becomes an obstacle in lowering the 200 series Hiace.By significantly lowering the vehicle height from the standard height, the effective stroke of the suspension is drastically reduced, causing an unpleasant shock when the vehicle is bumped heavily.However, if the vehicle is driven with the stopper removed in order to avoid such a situation, the front tire will rub the wheel house violently on bumps and curves, and the vehicle will be lifted up by the reaction when it rebounds, resulting in an unstable and even dangerous situation.In addition, the contact between the axle carrier and the floor at the rear of the vehicle results in a ride that is far from comfortable.The "Stroke Stopper" is an indispensable item to avoid the negative effects of lowering.
◎The gentle feeling of the bump touch has a great effect not only when riding but also when loading
Adopted the "two-layer structure" which is hard inside to suppress the stroke and soft outside to soften the bump touch.
◎Scientific analysis of the buffer capacity of the stopper
A novel and original shape derived by stress analysis using 3D CAD.By using the most advanced technology, OGUshow succeeded in reducing the stroke speed while absorbing the impact.
◎Special mounting plate that revolutionizes the front bump of 2WD vehicles
The "Mount Plate" is a revolutionary item developed to increase the capacity of the stopper.By inserting this plate between the lower arm and the lower arm, you can install a large stopper that exceeds the upper width of the arm.
◎Bump stopper can be adjusted to the operating point of your choice
For the front bumps, you can freely control the operating point of the stopper by using the included "Adjust Plate".In addition, if you use the optional "Adjust Plate" for the rear bump, you can use the stopper function effectively even if the vehicle height does not reach the hard down range.
◎Equipped with a "stopper angle plate" to correct the angle of the revamp stopper
It receives the input from the upper arm vertically and controls the rebump stroke securely.
◎Contributes to improved anti-roll performance during cornering
Active regulation of the rebump stroke provides anti-roll performance comparable to that of a reinforced stabilizer.
◎Substantially improved durability that could not be compensated by conventional products
Crush rigidity is improved by increasing the size of each stopper and strengthening the inner plate.High durability, far superior to conventional products.
Q. What is the standard for adjusting the mounting height?
A.The following is a guide for adjustment.
[Front bump]
In normal driving, it is most important that the tire does not interfere with the wheel house.Since the clearance varies depending on the tire outer diameter, use the adjusting plate to adjust the height without interfering with the wheel house at full bump.
[Rear bump]
The size and hardness are designed not to interfere with the floor just by installing it as it is.Please do not cut or otherwise modify the product.It is recommended to use the "Adjusting Plate" to optimize the front / rear stroke balance when installing on light down vehicles less than 2.0 inches (-50mm).
[revamp]
Depending on the mounting height, you can control the stability during roll.If you want to increase stability, narrow the clearance with upper arm, on the other hand, if you want to roll, cut the hemispherical part of the tip to make the clearance wider.
The stock stopper that becomes an obstacle in lowering the 200 series Hiace.By significantly lowering the vehicle height from the standard height, the effective stroke of the suspension is drastically reduced, causing an unpleasant shock when the vehicle is bumped heavily.However, if the vehicle is driven with the stopper removed in order to avoid such a situation, the front tire will rub the wheel house violently on bumps and curves, and the vehicle will be lifted up by the reaction when it rebounds, resulting in an unstable and even dangerous situation.In addition, the contact between the axle carrier and the floor at the rear of the vehicle results in a ride that is far from comfortable.The "Stroke Stopper" is an indispensable item to avoid the negative effects of lowering.
◎The gentle feeling of the bump touch has a great effect not only when riding but also when loading
Adopted the "two-layer structure" which is hard inside to suppress the stroke and soft outside to soften the bump touch.
◎Scientific analysis of the buffer capacity of the stopper
A novel and original shape derived by stress analysis using 3D CAD.By using the most advanced technology, OGUshow succeeded in reducing the stroke speed while absorbing the impact.
◎Special mounting plate that revolutionizes the front bump of 2WD vehicles
The "Mount Plate" is a revolutionary item developed to increase the capacity of the stopper.By inserting this plate between the lower arm and the lower arm, you can install a large stopper that exceeds the upper width of the arm.
◎Bump stopper can be adjusted to the operating point of your choice
For the front bumps, you can freely control the operating point of the stopper by using the included "Adjust Plate".In addition, if you use the optional "Adjust Plate" for the rear bump, you can use the stopper function effectively even if the vehicle height does not reach the hard down range.
◎Equipped with a "stopper angle plate" to correct the angle of the revamp stopper
It receives the input from the upper arm vertically and controls the rebump stroke securely.
◎Contributes to improved anti-roll performance during cornering
Active regulation of the rebump stroke provides anti-roll performance comparable to that of a reinforced stabilizer.
◎Substantially improved durability that could not be compensated by conventional products
Crush rigidity is improved by increasing the size of each stopper and strengthening the inner plate.High durability, far superior to conventional products.
Q. What is the standard for adjusting the mounting height?
A.The following is a guide for adjustment.
[Front bump]
In normal driving, it is most important that the tire does not interfere with the wheel house.Since the clearance varies depending on the tire outer diameter, use the adjusting plate to adjust the height without interfering with the wheel house at full bump.
[Rear bump]
The size and hardness are designed not to interfere with the floor just by installing it as it is.Please do not cut or otherwise modify the product.It is recommended to use the "Adjusting Plate" to optimize the front / rear stroke balance when installing on light down vehicles less than 2.0 inches (-50mm).
[revamp]
Depending on the mounting height, you can control the stability during roll.If you want to increase stability, narrow the clearance with upper arm, on the other hand, if you want to roll, cut the hemispherical part of the tip to make the clearance wider.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The "load capacity" specified may vary depending on driving conditions and road conditions.OGUshow is not responsible for any accidents, damages or any other liabilities.
*"Fitment information" is based on the information currently available from Ogusho or the manufacturer.In rare cases, the specifications may change due to minor improvements to the vehicle, and unfortunately, neither OGUshow nor the manufacturer is able to keep track of all the information.If the product is installed on a vehicle after a minor change or on a special specification vehicle, OGUshow may not be able to return or exchange the product even if a problem occurs.
*The color of painted exterior products such as aero parts and dress-up parts may differ slightly from the actual vehicle due to the production period of the vehicle and the aging of the paint.In order to match the color of your car, please purchase the unpainted product and bring your car to your local body shop for painting.OGUshow does not accept returns or exchanges due to differences in color.There may be some minor scratches or unevenness in the paint surface due to the aftermarket product.The quality of this product is not equivalent to the stock one.In addition, OGUshow may not inspect the painting condition of the product as it has been inspected by the manufacturer.
*The "installation difficulty" indicated is for reference only, and will vary depending on the user's knowledge and skills.If you have any doubts, please ask a professional shop to install it. OGUshow is not responsible for any damage or accidents that may occur during installation.
*There may be changes in product specifications due to the manufacturer's reasons.
*The color displayed on the screen and the color of the actual product may differ slightly depending on your display.
*This product is exclusive for vehicles with lowered specifications. It is designed to lower the vehicle height by more than 1.5 inches (-37.5mm) based on the standard vehicle height.
*Because of the nature of the material, hardening and deformation over time are inevitable, and the period during which performance can be maintained is limited.In order to achieve the best performance, it is recommended to replace them every two years as consumables.
*This product is made of silicon material with low hardness.The product may be deformed or crushed over time.
Applicable Models
TOYOTA 200 Series High ace 2WD
Review
0.0
/ 5
(0 Review)
