Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
100mm disk grinder
For Φ15mm (for Φ16mm)
Product Detail
Specification
[Quantity] 10pcs.[Material] Abrasive Grain: Aluminum
[Size]
Outer Diameter: 100mm
Hole Diameter: Φ15
Thickness: 1mm
[Product Contents]
•Body x10pcs.
•Spacer x10pcs.
Description
1mm thin, high cutting speed and net reinforcement to prevent breakage!
Metal grinding wheels for 100mm disc grinders.
Mainly used for cutting metal.
[Features, Thickness 1mm]
It is especially suitable for cutting thin materials.
It is thin, but the net reinforcement makes it difficult to break.
[About the disconnect]
In fact, not "cutting" but "scrapng" in a thin section.
When using it, rather than pressing it strongly, use it in a way that "advances while applying it" with the image above to reduce wear and tear and to proceed straight.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed High speed
Soft / Air / Flat / Cut
40 / 120 / 320
Metal grinding wheels for 100mm disc grinders.
Mainly used for cutting metal.
[Features, Thickness 1mm]
It is especially suitable for cutting thin materials.
It is thin, but the net reinforcement makes it difficult to break.
[About the disconnect]
In fact, not "cutting" but "scrapng" in a thin section.
When using it, rather than pressing it strongly, use it in a way that "advances while applying it" with the image above to reduce wear and tear and to proceed straight.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed High speed
Soft / Air / Flat / Cut
40 / 120 / 320
Caution
*The key is to proceed while cutting rather than pressing.*Do not use on the side because it has little cutting power and is easy to be damaged.
*Please use it with the attached spacer (Japanese disc grinder is Φ15mm, overseas is Φ16mm).
Applicable Models
100mm disk grinder
For Φ15mm (for Φ16mm)
Review
0.0
/ 5
(0 Review)
