Please login to check coupons
Product Detail
Specification
Lowering: Approx. 25mmFront Data: Oil number #15 / oil surface 140mm
Spring Type: constant rising rate
Description
Hyperpro's unique low down spring that lowers the vehicle height by changing the rate and adjusting the oil level without changing the free length of the spring.
No need to shorten the side stand because it is designed not to sink under the vehicle weight (1G) but to be lowered firmly under the riding condition (1G').
Suspension springs with Constant Rising Rate"" designed by Hyperpro. "
The spring rate constantly changes to follow the movement of the suspension.
It is not too soft and not too hard, and has the power to hold on even under heavy cornering and emergency braking.
●The change of the caster at the time of braking before the corner is optimized, and it makes it easy to move to the next operation.It absorbs small gaps during cornering and eliminates vibrations that interfere with the rider.
●Unlike normal springs, these springs do not have a constant spring rate and therefore do not resonate.
●After the springs are wound by computer-controlled machine tools, they are treated with shot to remove minute scratches on the surface that may lead to deterioration of performance.In addition, after the completion, the performance of each unit is inspected by a tester.
●In the Netherlands, where Hyperpro is based, all emergency bikes are equipped with Hyperpro springs.
No need to shorten the side stand because it is designed not to sink under the vehicle weight (1G) but to be lowered firmly under the riding condition (1G').
Suspension springs with Constant Rising Rate"" designed by Hyperpro. "
The spring rate constantly changes to follow the movement of the suspension.
It is not too soft and not too hard, and has the power to hold on even under heavy cornering and emergency braking.
●The change of the caster at the time of braking before the corner is optimized, and it makes it easy to move to the next operation.It absorbs small gaps during cornering and eliminates vibrations that interfere with the rider.
●Unlike normal springs, these springs do not have a constant spring rate and therefore do not resonate.
●After the springs are wound by computer-controlled machine tools, they are treated with shot to remove minute scratches on the surface that may lead to deterioration of performance.In addition, after the completion, the performance of each unit is inspected by a tester.
●In the Netherlands, where Hyperpro is based, all emergency bikes are equipped with Hyperpro springs.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Hyperpro front springs have their own oil viscosity and oil level settings for each model, which differ from the values specified by the vehicle manufacturer.Please confirm the values listed in the instruction manual attached to the product before carrying out the work.*If the bike is lowered by more than 30mm, a short side stand may be required depending on the condition of the bike.If your vehicle is equipped with a preload adjuster, adjust the lowering to a level where the side stand can be used.
*When using the side stand, stop the vehicle on a level surface in first gear.(Because of the lowering, the body will be raised more than stock)
*After installation, the balance of the vehicle body will be greatly changed.Be sure to to set the front and rear settings before riding.