[Size] ・Front rim size: 3. 50-17 ・Rear rim size: 6.00-17 [Material] ・Aluminum for forging (Al) AA6009 / T1 ・A7075 series (Super duralumin) [Finish] High quality urethane paint [Weight] ・Front: 3.72kg (Stock: 4.34kg) ・Rear: 5.95kg (Stock: 6.99kg) [Applicable sprocket size] A525.43 [Standard sprocket size (OEM)] #525-43 [Recommended sprocket size (marchesini)] #525-43 [manufacturing process] ・Forging method (Forged) ・Hot forging ・Exclusive Mold ・Multi-directional simultaneous press forging (Total Formed Forging System) ・15,000-ton class forging press ・Final shape cutting and finishing by CNC (computer controlled) [Components] Aluminum air valve (L (90 degree) specification) [Specification] ・It can be used for racing ・New ring type damper system adopted JWL standard compliant product [Country of Origin] Italy (MADE IN ITALY) [Manufacturers] Brembo S.p.A Via Brembo.25 24035 CURNO (BG) Italy
Note
* This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Special sprockets are sold separately. *The color of the wheel may look different from the actual color due to the shooting and display screen. *The image shows the shape of the spokes, and the shape of the hub may vary depending on the vehicle. *The design of the rim is slightly different for street / racing due to the adaptation to the purpose of use. [Display of wheel weight (measurement conditions)] *The wheel weight displayed is the "wheel assembly weight" which includes the weight of fitting parts such as bearings, side collars and sprocket holders. *Weights are measured on the assumption that the same components are used for both the stock wheel and the Marchesini wheel - the weight of the wheel alone, without the components, does not allow a proper comparison due to the differences in construction. *In order to accurately compare the weight of the wheel with that of the stock-installed wheel, the weight measurement is standardized to the following conditions. *[FRONT WHEEL] =Measurement of the weight with the wheel removed from the bike and the tire and disc rotor removed *[REAR WHEEL] =Weight with the wheel removed from the bike and the tire, disc rotor and sprocket removed *"OEM ratio" is the ratio of weight reduction possible when comparing the weight of a Marchesini wheel to the weight of a stock (OEM) wheel under the same measurement conditions.(The larger the minus value, the lighter the wheel is compared to the stock wheel.) [About the sprockets] *For street use, unless there is a significant change in the tire size to be combined with the wheel change, the "stock standard size sprocket" should be selected as a general rule. *Even if the rear tire size is changed by changing the wheel, the next change is considered as no change in tire diameter. *170/60ZR17 ⇔ 180/55ZR17 ⇔ 190/50ZR17 *The recommended sprocket size is different from the stock standard size in some models, but these models have a relatively large change in tire diameter by changing wheels and tires.
[About Metal series (gold anodized finish) products] Anodized aluminum products are finished by coloring with anodizing. Please understand that anodizing has the following characteristics and weak points. ●Machining marks caused by cutting The wheel is produced by machining. Since products as large as wheels are processed and finished by "total machining, " there will be fine "cutting marks" on the products. We evaluate such "cutting marks" in terms of finishing, considering the wheel as a functional part. ●Anodized aluminum treatment Anodizing is applied as a finishing of the wheels. Anodizing is a process that creates an anodic oxide film on the aluminum surface, which has the advantage of improving corrosion and corrosion resistance, but because it is a process that applies a film to the surface of the product, it cannot hide the "cutting marks" described in the previous section, unlike a painted finish. Also, unlike a painted finish, the color of the product may vary in shade and unevenness. ●Product quality criteria Anodized aluminum products are delivered after being evaluated in consideration of the anodized aluminum products characteristics. The products delivered are basically in the range of good products. * Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
