Please login to check coupons
Product Detail
Specification
Material: A5052Surface Treatment: Each Color Anodizing
[Recommendation]
Recommended Tire Size: 120/70-8 (B77) , Or 120/70-8 (B77)
Recommended Tire Tube: 3.5-4.0-8
Description
The long-awaited 5.5J is lined up in the popular 8 inch wide wheel!
The width of the rim is 150mm, more than double the width of the stock 2.5J wheel, and is about 35mm wider than the 4.0J wheel, which was the largest width in the lineup.
This is the 8 inch maximum width wheel that can be installed on the Monkey / Gorilla.
●Various parts required to install 8 inch 5.5J wide wheels
Super Wide Swingarm
39419, 20mm offset spacers
37125, 20mm offset generator cover
36028, 20mm offset sprocket 16T
30047 wide suspension receiver 20mm wide (for twin suspension)
*Not required for Low Cost Type Super Wide Swingarm.
30035 Drum Brake Arm (Honda Stock Part Number 43410-GEY-000)
The 37125, 20mm offset generator cover is a set of generator cover and 37126, 20mm offset sprocket cover.
If you already have the 37124 billet aluminum generator cover, you only need the 37126.
The 37125, 20mm offset generator cover is not required when using a Jazz engine.
It is recommended to install the 39407 engine reinforcement plate at the same time to prevent the engine from moving.
The above parts are for drums.
The width of the rim is 150mm, more than double the width of the stock 2.5J wheel, and is about 35mm wider than the 4.0J wheel, which was the largest width in the lineup.
This is the 8 inch maximum width wheel that can be installed on the Monkey / Gorilla.
●Various parts required to install 8 inch 5.5J wide wheels
Super Wide Swingarm
39419, 20mm offset spacers
37125, 20mm offset generator cover
36028, 20mm offset sprocket 16T
30047 wide suspension receiver 20mm wide (for twin suspension)
*Not required for Low Cost Type Super Wide Swingarm.
30035 Drum Brake Arm (Honda Stock Part Number 43410-GEY-000)
The 37125, 20mm offset generator cover is a set of generator cover and 37126, 20mm offset sprocket cover.
If you already have the 37124 billet aluminum generator cover, you only need the 37126.
The 37125, 20mm offset generator cover is not required when using a Jazz engine.
It is recommended to install the 39407 engine reinforcement plate at the same time to prevent the engine from moving.
The above parts are for drums.
Caution
*For Super Wide Swingarm only.*The chain line must be offset by 20mm to the outside when installing.
*The shape of the rim may differ from left to right.This is due to lot error and is not a defect.
*The valve hole is on the brake panel side for both front and rear drum brakes.In the case of disc brakes, both front and rear brakes are on the sprocket side.
*The image shows color: Silver.
Model Page Links
Review
0.0
/ 5
(0 Review)