Please login to check coupons
Product Detail
Specification
[Set components]・Coil unit x 1
・Coupler x 1
・Terminal x 5
・Wiring diagram
[Conforming condition]
Motorcycle: Ignition system igniter
CAR: Compatible with distributor, igniter, ECU, MoTeC, Haltech, etc.
[Specifications]
●Output (no load): 40kV minimum
●Output (50pF load): 40kV + / -10
●Output Energy: 103 mJ + / - 7
●Peak Secondary Current: 102 mA +/-10
●Arc Duration: 2.9mS + / -10
●Turns Ratio 71: 1
●Maximum Current: 19 Amps
●Maximum Battery Voltage: 17 Volts
●Base Dwell: 3.0 mS
●Max Continuous Dwell: 9 mS but don't exceed 40% duty cycle
●Max Intermittent Dwell: 80% duty cycle, 5 seconds maximum
Note
*Please be informed that all engine and frame products we sell do not come with any documents required for registration.
These items are intended for replacement or customization purposes only and cannot be used for vehicle registration.
These items are intended for replacement or customization purposes only and cannot be used for vehicle registration.
Caution
*The wiring diagram is not specific to your model.*Please prepare your own plug cord as it is not included.
*Since this is a universal product, modification of the bracket and wiring is required for installation.
*Please do not install unless you are an experienced person who can judge the quality of the electrical components such as stator coil.
*If the ground wire on the vehicle side is defective, or if you use a battery made overseas, the charging voltage will not rise and the regulator will be damaged early.
*Please be sure to measure the charging voltage after installation.
Applicable Models
Universal
Review
0.0
/ 5
(0 Review)
