Buy Original BRISK：BRISK LGS Plug [BOR12LGS]

Specification

BOR12LGS (NGK "D plug" size)
[Quantity] 1
[Size]
・Screw diameter 12mm
・Reach 19mm
・Plug wrench size 16mm
[Shape] Terminal separation type
[NGK compatible] D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR9EIX9, DPR8EIX9, DPR9EIX9, DCPR8EK, DCPR8EIX, JR8B etc.
*Heat value correspondence is from No. 8 to No. 10.

Description

With resistance (Resistor type)
In the vehicle where the tuning of the ignition system is done by Utani SP-2 etc., the effect such as the acceleration, the vibration reduction, and the flat torque characteristic, etc. will be realized as an amazing feeling difference immediately after the plug is changed.
Especially, it shows the overwhelming performance in the high comp high tuned engine.About the vehicle after 2000, because the stock ignition system tends to have enough ability, it tends to be able to function.
However, we have not verified all the vehicles, so please contact us for more information.

In comparison with the ZC/ZS type, the LGS type has better performance in the mid-to-high RPM range power band, while the ZC/ZS type has better flat characteristics in the low and mid RPM range, so please choose according to your application and preference.

NGK D plug size.
Compatibility with NGK plugs is as follows, heat value correspondence is from No. 8 to No. 10.
D8EA, D9EA, D10EA, DR8EA, DR9EA, DR10EA, DP8EA9, DP9EA9, DP10EA9, DPR8EA9, DPR9EA9, DPR10EA9, DPR8EIX9, DPR9EIX9, DCPR8EK, DCPR8EIX, JR8B

Note

* This item can not be cancelled, returned nor exchange after placing an order.

Caution

*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Ignition tuned bikes - available.
*Ignition system stock bikes - Not available
*Full transistor ignition bikes - available.
*CDI ignition bikes - Not available.
*4-stroke bikes - available.
*2-stroke bikes - full transistor ignition system is available.
*Brisk LGS plug has become an extremely wide plug gap setting, and because the ignition ability that can only discharge to this is necessary, it may not function sufficiently in the stock ignition system.
*Please note that it does not fit CDI ignition system.For CDI ignition vehicles, Brisk ZC / ZS type fits.
*Images are for reference only.The product is sold by the unit of one bottle.
*Resistor type (with resistor)
*Plug wrench size is 16mm which is used for C plug etc
*The terminal is separable, so it is compatible with any plug cap shape.The terminal is only lightly screwed in at the time of shipment, so please check the tightness of the terminal when installing
*Please refer to the NGK plug list for other compatibility information.All the mounting threads with a diameter of 12mm and a length of 19mm have compatibility.
*The tightening torque is 1.3kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.

* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.

BRISK LGS Plug [BOR12LGS]

Product Detail

Specification

Description

Note

Caution

Model Page Links

Review

ALSO VIEWED PRODUCTS

BRISK LGS Plug [BOR12LGS]

Product Detail

Specification

Description

Note

Caution

Model Page Links

Review

ALSO VIEWED PRODUCTS

Products Ready to Ship from Stock

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

Recently Viewed Products

New Custom Article

Apply Coupon

Image Review

Review detail