Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
MONKEY GORILLA
Product Detail
Specification
made in ChinaManufacturer: KEPSPEED Company
Description
Standard model with extra thick hexagonal triple-square section pipe!
This is the standard model of Type G that has made KEPSPEED famous.
No compromises have been made with the use of hexagonal triple-sectioned pipes and needle bearings in the pivot section.
There are four types of extension: +6cm, +12cm, +16cm and +20cm.
●Needle bearings are used in the pivot section
●The biggest selling point!Adopted a pipe with the twin-square section
●This is a familiar chain adjuster.
This is the standard model of Type G that has made KEPSPEED famous.
No compromises have been made with the use of hexagonal triple-sectioned pipes and needle bearings in the pivot section.
There are four types of extension: +6cm, +12cm, +16cm and +20cm.
●Needle bearings are used in the pivot section
●The biggest selling point!Adopted a pipe with the twin-square section
●This is a familiar chain adjuster.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
[Notes on purchase]*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
※ About installation
Stock axle shafts can be used, but it is recommendable to use 215mm M12 long shafts for safety.
Long axle shafts are available separately.
The mountable wheel diameters for each extension type vary depending on the combination of flatness and wheel width of the tire used.
Please refer to the size image and judge by yourself.
Also, the installation of wide wheels up to 4.0J are comfirmed.
However, it is necessary to adjust the center position of the wheel, the chain line, and the position of the brake related parts.
This adjustment method varies depending on the condition of the customer's vehicle and the relationship with other parts used.
You will be responsible for these adjustments.
Also, please note that it does not ensure a safe separation as recommended by the motorcycle manufacturer.
Due to the extended swingarm length, the drive chain needs to be extended.
The number of frames of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
In addition, depending on the specifications of the customer's vehicle, the tires may come in contact with the fender or other parts of the vehicle.
Even when the rear suspension is at full bottom, be sure to check for any abnormal contact points before driving.
If there is a gap of 0.5mm or more between the frame and the swingarm, please use washers to reduce the gap.
If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
After the start of driving, pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
MONKEY GORILLA
Review
0.0
/ 5
(0 Review)
