Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
XR50 Motard (AD14) All models
XR100MOTARD (HD13) All models
Product Detail
Specification
ULTRA clutch cover for cylinder removalOil capacity in condenser: 150cc (5-stage core) / 75cc (3-stage core)
Oil cooler: 3-stage core capacitor
Bolt-on installation is available
Bracket for exclusive use of model included
Description
Necessities for high tuned engines including big bore.The engine with high rpm and high performance emits huge amount of heat as a compensation, and it may be damaged by overheating or seizure if the engine is left in stock condition, so it is recommended to install the oil cooler.
The Super Oil Cooler Kit has the same heat radiation capacity (5-stage core) as 400cc class oil cooler, and shows stable engine performance even under severe conditions such as racing and under the hot sun.
Union bolts are used on the oil cooler for greater flexibility in hose routing.The union bolt has been anodized in color.
The hose is an outer layer braid hose with inner diameter Φ6.2 and outer diameter Φ12.6.It boasts high pressure resistance and high durability.
The Super Oil Cooler Kit has the same heat radiation capacity (5-stage core) as 400cc class oil cooler, and shows stable engine performance even under severe conditions such as racing and under the hot sun.
Union bolts are used on the oil cooler for greater flexibility in hose routing.The union bolt has been anodized in color.
The hose is an outer layer braid hose with inner diameter Φ6.2 and outer diameter Φ12.6.It boasts high pressure resistance and high durability.
Caution
*If you have installed a Big Bore kit, be sure to use it together with the oil filter kit (Vol.00-3).*Stock exhaust cannot be installed.Other up type mufflers may interfere with the oil hose.
*Since an oil cooler is installed, a large capacity oil pump (Super Oil Pump Kit: 331-1413000) is recommended.
*The installation bracket may need to be changed or modified if the tank, clutch or other accessory parts are installed at the same time.
*Make sure to install the condenser according to the installation instructions.If the union nipple side is installed face down, the oil pressure will drop and the cylinder head will not be lubricated enough.
*The right side stock crankcase cover requires a tapped hole.
*The oil line can be removed from the Kitaco ULTRA clutch cover or the cylinder for the Φ57 bore increase.
*When the ULTRA clutch cover is not installed with the big bore kit, be sure to use it with the oil filter kit.
*Stock exhaust cannot be installed.Other up type exhausts may interfere with the oil hose.
*It is recommended to use with a large capacity oil pump.
Applicable Models
XR50 Motard (AD14) All models
XR100MOTARD (HD13) All models
