12V Cub Series Super Clutch Kit Centrifugation Clutch Specification
- Product number: 5544
- MINIMOTO
- |
- 4.7
- (3 Reviews)
Please login to check coupons
Product Detail
Specification
[Specification]Clutch Weight: 8 pieces (4 pieces for normal)
Reinforced clutch spring installed
Recommended Big Bore Displacement: 49-106cc
Allowable Rotation Speed: MAX12000rpm
Compatible with a temporary reduction ratio of 4.058 (17 / 69T)
[Components]
・20% Higher spring rate, 8pcs Clutch weight, Clutch Assembly (pre-installed) x 1set
・R crankcase cover gasket x 1set
・Clutch outer cover gasket x 1pcs
・Clutch outer cover x 1
・Lock washer taper x 1pc
・Lock washer with claw x 1pc
・Clutch lock nut x 1pc
・Screws for clutch outer cover x 4pcs
Description
The primary drive and driven gears are not changed and are used as they are, so the 1 reduction ratio remains the same.
Even if the power slips with the stock centrifugal clutch, the driving force is transmitted reliably.
This is the enhanced centrifugal clutch KIT which is most suitable for power-up centrifugal clutch vehicles.
Even if the power slips with the stock centrifugal clutch, the driving force is transmitted reliably.
This is the enhanced centrifugal clutch KIT which is most suitable for power-up centrifugal clutch vehicles.
Caution
*Parts are required for the 6V MONKEY separately.23110-GK-010 Gear COMP Primary Driven (69T), 22121-035-020 Guide and Clutch Center, 23120-086-020 Gear Primary Drive (17T), By installing the above parts, the primary reduction ratio will change from 18/67 (3.722) to 17/69 (4.05). (4.05), it is necessary to reset the secondary reduction ratio with the sprocket.*To remove and install the lock nut, use the lock nut wrench (part number: 2939), Universal pulley holder (Part No: 1888),Other universal tools such as torque wrenches and socket wrenches are required.
*There may be changes in product specifications due to the manufacturer's reasons.