Please login to check coupons
Product Detail
Specification
[Material]・Stem shaft: AL7075
・Other parts: AL2017
[Size]
・Fork pitch: 210mm
・Fork diameter (top part): Φ50
・Fork diameter (under bracket part): Φ54
・Screw holes on under--bracket: M6XP=1.0
・Screw pitch on under-bracket: 46mm
・Offset amount: 30mm (28 and 32mm can be selected with optional collar sold separately)
[Component]
・Stem nut
・Handle Post
・Bearing
・Dust seal
・Handle clamp (only for bar handle)
Description
Ohlins upside down forks "FG324 / 424:This triple tree is designed to be compatible with "800mm".
For GPZ900R, there are two types: one for bar handlebar and the other for separate handlebar.
The main parts such as the top bridge, under bracket, and stem shaft are machined from aluminum to achieve high rigidity and light weight.
The stiffness of the Ohlins upside down fork will further increase the potential!
Offset amount is 30mm as standard, 28mm and 32mm can be selected by using optional "Offset change collar", and 3 positions can be selected.
There are two threaded holes on the front part of the under bracket so that a joint for splitting the front brake hose can be attached.(M6 x P=1.0 Screw pitch:46mm)
The stem nut and handlebar stopper are machined from the same aluminum as the main body, and can be adjusted to match the offset.
Bearings, dust seals, and handle clamps for the lower part of the shaft are also included.
Recommended Wheels:For ZRX1200,ZRX DAEG (Please use the stock ZRX1200 axle shaft with the special nut "103EZEY001H" which is sold separately by K-FACTORY.)
For GPZ900R, there are two types: one for bar handlebar and the other for separate handlebar.
The main parts such as the top bridge, under bracket, and stem shaft are machined from aluminum to achieve high rigidity and light weight.
The stiffness of the Ohlins upside down fork will further increase the potential!
Offset amount is 30mm as standard, 28mm and 32mm can be selected by using optional "Offset change collar", and 3 positions can be selected.
There are two threaded holes on the front part of the under bracket so that a joint for splitting the front brake hose can be attached.(M6 x P=1.0 Screw pitch:46mm)
The stem nut and handlebar stopper are machined from the same aluminum as the main body, and can be adjusted to match the offset.
Bearings, dust seals, and handle clamps for the lower part of the shaft are also included.
Recommended Wheels:For ZRX1200,ZRX DAEG (Please use the stock ZRX1200 axle shaft with the special nut "103EZEY001H" which is sold separately by K-FACTORY.)
Caution
*Bearings and oil seals are included, but not installed.*The image shows color: Super black.
Model Page Links
Review
0.0
/ 5
(0 Review)