Reinforced Igniter for CBX400F1 Type CBX550F
- Product number: W-1513-P11791339
- H.Craft
- |
- 0.0
- (0 Review)
Please login to check coupons
Product Detail
Specification
Case Size: 70mm x 86mm x 25mmDescription
This is the original igniter for CBX400F Type 1.
Because it is made based on the ignition timing of stock, the feeling will be the same thing as stock at all.
The difference between this product and the stock one is that the inside of this product is filled with resin, so the shockproof and waterproof properties are improved compared to the stock one.
Rebuilt products cannot replace all the internal parts, so the electronic parts will inevitably deteriorate.
It has been tested for a long time and has a good track record, so you can use it with confidence.
You can use double-sided tape or Velcro to attach it to the stock mounting point.
Because it is made based on the ignition timing of stock, the feeling will be the same thing as stock at all.
The difference between this product and the stock one is that the inside of this product is filled with resin, so the shockproof and waterproof properties are improved compared to the stock one.
Rebuilt products cannot replace all the internal parts, so the electronic parts will inevitably deteriorate.
It has been tested for a long time and has a good track record, so you can use it with confidence.
You can use double-sided tape or Velcro to attach it to the stock mounting point.
Caution
*Please do not install unless you are an experienced person who can judge the quality of the electrical components such as stator coil.
*If the ground wire on the vehicle side is defective, or if you use a battery made overseas, the charging voltage will not rise and the regulator will be damaged early.
*Please be sure to measure the charging voltage after installation.
Applicable Models
Model Page Links
Review
0.0
/ 5
(0 Review)