Please login to check coupons
Product Detail
Specification
[Color]・Back LED: orange
・Needle: orange
Material: Body: Stainless steel, Bracket: Stainless steel
[Size]
Diameter: 48mm (53mm at trim)
Depth: 52mm
Mounting Hole Diameter: Approx. 10 mm
Offset:Approx. 50mm (Main unit center - Mounting hole center)
[Set components]
Meter unit, bracket, switching switch, diode for blinker indicators
Description
It is a small type meter of 48mm.
The color of the light is orange, similar to the stock meter.
It also has a trip meter so you can control the fuel consumption.
Moreover, you can easily check the condition of the vehicle with various indicators.
Furthermore, the pulse setting can be adjusted, so it fits almost all vehicles with electronic control meters!
If you have a problem that the gear ratio is correct but the meter display is not, or if you want to change the tire size or sprocket size, this is the best choice for you.
When the tank is changed, the meter needs to be relocated.and the meter is too big and uncool!This is the hex-hole type which is effective in such cases.
Please refer to the speedometer with indicator manual for wiring colors.
The color of the light is orange, similar to the stock meter.
It also has a trip meter so you can control the fuel consumption.
Moreover, you can easily check the condition of the vehicle with various indicators.
Furthermore, the pulse setting can be adjusted, so it fits almost all vehicles with electronic control meters!
If you have a problem that the gear ratio is correct but the meter display is not, or if you want to change the tire size or sprocket size, this is the best choice for you.
When the tank is changed, the meter needs to be relocated.and the meter is too big and uncool!This is the hex-hole type which is effective in such cases.
Please refer to the speedometer with indicator manual for wiring colors.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*It is fully electromagnetic.Meter cables cannot be used.*Blinker self-cancellation is not to be used for 1991 and later models.
*Bulbs cannot be replaced
*Please refer to the instruction manual for pulse adjustment.
*The color of the wiring on the vehicle side is different for each model and year.
*Neofactory does not provide installation instructions, so please ask a professional shop for installation.