PAGE TOP

【SSK】Aluminum Billet Adjustment Lever Set Standard Long

Product images are for illustrative purposes only and may differ from the actual product.
Price: ฿5,401
Webike Points: 54

Applicable Models:

GSX-S750 17-21

SV650 16-21

DL1000 V-STROM650 11-21

See More

Best Selling Products

Product detail

[Specification]

Lever Color: Blue
Material: High-strength Aluminum Alloy 6061
Lever Length: (Approximately) 172mm

[Caution]

*There are cases that it uses parts with OEM lever depending on the mounting vehicle.
*Please make sure that there is no abnormality after replacing the lever.
*There are cases that the color of the product on the photo and the actual are slightly different for reasons such as the environment of the monitor.
*The photo of the product is for reference only.
*There are cases that this product is subjected to change the price and specification without prior notice.

[Description]

It gives a luxurious feeling due to the anodized treatment on the lever body which is precision processed high strength aluminum alloy 6061, and achieves a high precision.
It is install able to OEM master cylinder, and clutch lever holder.
It reduces the required force for operation due to the easy-to-grasp shape.
It is possible to adjust up to approximately 28mm with 6-stages adjuster, and it can ensure comfortable operability even to short woman since it is possible to set it to the lever position you like.

*The adjuster (adjustment knob) is possible to choose from 7-colors on the photo.
Since we bundle a list of repair parts when shipping items, it is possible to sell parts when breakages or sunburn and etc. occurred.

Applicable Models

Reviews

  • 4.0

    10 Reviews

  • 5

    Perfect

    6

    4

    Very Good

    2

    3

    OK

    0

    2

    Poor

    0

    1

    Very Poor

    2
  • Write a review

    I purchased it because I wanted to exchange OEMLever for BALIUS 2.
    I was looking for an inexpensive one with an Adjust lever and I arrived at this item.
    Color is Gold, Adjust part is Black.
    Installation work is amateur me even with blog watching within 1 hour Quantity : Pair (for Left and Right) I've exchanged Lever's.
    [Impressions]
    Both Clutch and Brake lever seem to have some wobble, but I think that it is acceptable range.
    Very easy to hold shape very well. Also, I like colors very much.

    I purchased it because I wanted to exchange OEMLever for BALIUS 2.
    I was looking for an inexpensive one with an Adjust lever and I arrived at this item.
    Color is Gold, Adjust part is Black.
    Installation work is amateur me even with blog watching within 1 hour Quantity : Pair (for Left and Right) I've exchanged Lever's.
    [Impressions]
    Both Clutch and Brake lever seem to have some wobble, but I think that it is acceptable range.
    Very easy to hold shape very well. Also, I like colors very much.

    I installed it in ZEPHYR 1100. I bought it for a while after purchase, but after a half year from the start of use Brake was damaged if the Adjuster part of Lever on the brake side was damaged, or Brake did not work properly unless it grasped quite deeply.

    Of course, there are no falls or excessive shocks.

    I chose it by appearance, but I can not recommend it for safety.

    I installed it in ZEPHYR 1100. I bought it for a while after purchase, but after a half year from the start of use Brake was damaged if the Adjuster part of Lever on the brake side was damaged, or Brake did not work properly unless it grasped quite deeply.

    Of course, there are no falls or excessive shocks.

    I chose it by appearance, but I can not recommend it for safety.

    BANDIT 1250 F Fixed yearly. Regarding the Clutch lever, since ClutchStart is equipped from the 2007 model, if the protrusion that pushes the punch is not attached, the Cell does not turn, so conformity confirmation is necessary, but it is necessary to confirm conformity within We Big's site "View compatible models" It was 07 - 13 years when I looked at it, so I asked Bae Wee to confirm conformity by e - mail
    From the person in charge, there was a reply the next day, it was that it was conforming OK. I was thankful for the prompt response. The installation situation is super easy, only the Clutch side has to replace the Black Rubber from the Lever of the STD, except only to remove the Bolt and exchange. The color and shape are as imagined
    I am satisfied with myself when I installed something good enough to make you refreshing when I see it.

    BANDIT 1250 F Fixed yearly. Regarding the Clutch lever, since ClutchStart is equipped from the 2007 model, if the protrusion that pushes the punch is not attached, the Cell does not turn, so conformity confirmation is necessary, but it is necessary to confirm conformity within We Big's site "View compatible models" It was 07 - 13 years when I looked at it, so I asked Bae Wee to confirm conformity by e - mail
    From the person in charge, there was a reply the next day, it was that it was conforming OK. I was thankful for the prompt response. The installation situation is super easy, only the Clutch side has to replace the Black Rubber from the Lever of the STD, except only to remove the Bolt and exchange. The color and shape are as imagined
    I am satisfied with myself when I installed something good enough to make you refreshing when I see it.

10 reviews View all

Most Viewed Products

【SP Takegawa】LED Tail Bulb BAY15D
LED Tail Bulb BAY15D SP Takegawa GORILLA
【SP Takegawa】Super Oil Pump Kit
Super Oil Pump Kit SP Takegawa Monkey 125
【DOREMI COLLECTION】Fork Cover Emblem
Fork Cover Emblem DOREMI COLLECTION ZEPHYR400 (ZR400)
【TaGu (Taguchi)】Shift Guide
Shift Guide TaGu (Taguchi) CBR1000RR Fireblade
【NTB】Clutch Cable
Clutch Cable NTB D-TRACKER
【ZETA】Pilot Lever Clutch
Pilot Lever Clutch ZETA Ninja ZX-6R