Please login to check coupons
Product Detail
Description
Easy to replace.
Inner suspension kit for stock type front forks.
For monkey drum, 2.5cm cut and 5.0cm cut are available.
There are three types for MONKEY discs: stock length, 2.5cm cut and 5.0cm cut.
For DAX and CHALY drums, there are only 2.5cm cut, and for DAX and CHALY discs, there are two types: stock length and 2.5cm cut.
There are 8 types of innerwear.
Replacement is very easy.If you loosen the dust seal at the lower end of the outer case and the top bolt of the suspension, the inner mechanism will come out completely.
Apply grease liberally, and insert and tighten in the reverse order of removal.
Inner suspension kit for stock type front forks.
For monkey drum, 2.5cm cut and 5.0cm cut are available.
There are three types for MONKEY discs: stock length, 2.5cm cut and 5.0cm cut.
For DAX and CHALY drums, there are only 2.5cm cut, and for DAX and CHALY discs, there are two types: stock length and 2.5cm cut.
There are 8 types of innerwear.
Replacement is very easy.If you loosen the dust seal at the lower end of the outer case and the top bolt of the suspension, the inner mechanism will come out completely.
Apply grease liberally, and insert and tighten in the reverse order of removal.
Caution
[Notes on purchase]*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
[About the installation]
The fork type is compatible with our products and the screw-in seal type of the earlier models.
Loosen the dust seal at the lower end of the outer case and the top bolt of the suspension, and remove the existing inner mechanism.
Apply enough grease to the spring part of this kit, and install it in the reverse order of removal.
At this time, firmly fit the anti-rotation protrusion of the inner part into the recess of the outer part.
After replacing the inner mechanism, check that there are no defects or interference in the operation of the related parts, and tighten each part thoroughly.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*Country of origin: China
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
Model Page Links
Review
0.0
/ 5
(0 Review)
