Maximum current 8A (LED to 23w bulb x 4 pcs.) Rating:For 12V Dimensions: 40mm x 30mm x 20mm (excluding cord) Flashing Speed: Approx. 80 times / min Interchangeable with stock 2-terminal / 3-terminal type relays
Description
If you replace the indicator light bulb with LED, the stock indicator relay will not work properly and the indicator light will not blink properly.Replace the stock relay with a L-beam specific IC indicator relay.
Features of the LRL700 ●Specially designed to take into account the severe voltage fluctuations inherent in motorcycles ●Compact size for easy installation ●It has a large capacity and can hold up to 4 x 23w bulbs, not to mention LEDs ●Light bulbs can be used together! You can also use a mixture of LEDs and bulbs
RL700 Specifications Maximum current 8A for 112V (LED to 23W bulb x 4) Flashing speed Approx. 80 times / min. Dimensions 40mm x 30mm x 20mm (excluding cord) Interchangeable with stock 2-terminal / 3-terminal type relays
caution ●This product cannot be used for battery-less vehicles. ●There is no function other than the indicator relay.If the stock relay has a function other than relay, that function may become unusable. ●If your vehicle has a special function of indicator, you may not be able to use the function or you may not be able to install it.(Remote control answer-back function, indicator auto cancel function, anti-theft security, etc.) ●There is no sound of relay operation (ticking sound).
Wiring connection method Remove the wiring from the stock relay and connect the IC relay to that wire.When replacing with a 22 terminal type relay, connect the black wire (ground wire) of the IC relay to the metal part of the vehicle body.When replacing the relay with a 3-terminal type relay, you can either connect the black wire to the "minus earth" wire in the table on the right, or to the metal part of the vehicle body.(The color scheme may vary depending on the vehicle.Be sure to check the wiring diagram for each vehicle)
Caution
*Images are for reference only.
This is a must-have item to make your blinkers LED. *Images are for reference only.
