Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
Z2 (750RS/Z750FOUR) 72-80
Z1 (900SUPER4) 72-80
Z900 (KZ900) 72-80
Z1000 MkII 72-80
Z1-R/Z1-RII 72-80
Show more
Product Detail
Specification
Kit contents:・Billet clutch release housing
・Release
・Release Oil Seal
・3 point bearing
・Bearing base
・Stainless Steel Push Rod
Description
Clutch work becomes easier!Are you giving up the heaviness of the clutch which is peculiar to the Z series vehicle as "It is not helped because it is an old vehicle"?.This "Easy Clutch Kit" is a revolutionary system kit that dramatically lightens the clutch work of Z series vehicles, which was said to be impossible.
・By changing the clutch release of the "three-point ball bearing type" from the "screw commutator type" which has a very large frictional resistance, the rotational resistance is greatly reduced, and the frictional resistance is also dramatically reduced because it is changed from "surface" to "point".
・By adopting the long reach type release arm, the distance from the fulcrum is extended and the clutch work is designed to be even lighter, so it is also suitable for owners who are considering installing a reinforced clutch kit.
・To install, simply remove the two bolts that hold the release base in place and replace it with the assembly.After the replacement, adjustment and maintenance are done by the same push and lock system as stock.
・The release housing is designed to be the same size as the stock base, so it can be used not only with the stock front sprocket cover, but also with PMC (part number 72-222 or 72-224) and other manufacturers' clutch release plates without any problem.
・By changing the clutch release of the "three-point ball bearing type" from the "screw commutator type" which has a very large frictional resistance, the rotational resistance is greatly reduced, and the frictional resistance is also dramatically reduced because it is changed from "surface" to "point".
・By adopting the long reach type release arm, the distance from the fulcrum is extended and the clutch work is designed to be even lighter, so it is also suitable for owners who are considering installing a reinforced clutch kit.
・To install, simply remove the two bolts that hold the release base in place and replace it with the assembly.After the replacement, adjustment and maintenance are done by the same push and lock system as stock.
・The release housing is designed to be the same size as the stock base, so it can be used not only with the stock front sprocket cover, but also with PMC (part number 72-222 or 72-224) and other manufacturers' clutch release plates without any problem.
Note
Applicable Models
Z2 (750RS/Z750FOUR) 72-80
Z1 (900SUPER4) 72-80
Z900 (KZ900) 72-80
Z1000 MkII 72-80
Z1-R/Z1-RII 72-80
Show more
