Please login to check coupons
Product Detail
Specification
*Please check the image 2 for the compatibility with each vehicle.Description
This adapter is required for the installation of oil pressure sensors in various vehicles.Converts the screw diameter and pitch to the appropriate size for the installed vehicle.
・In the case of injection vehicles, the warning light will come on as the stock water temperature sensor is removed.
Depending on the vehicle, the engine may not start.
・In the case of 2-stroke vehicles, oil temperature cannot be measured because oil is used to lubricate the clutch and transmission.
・Please make sure that the wiring of the sensor does not come into contact with high temperature parts such as the exhaust and engine.
Particular attention should be paid to the model which requires to take wires from the drain bolt.
・If the stock sensor also serves as the fan switch, since the fan will not operate properly,
Do not replace the sensor in this kit.
・In the case of injection vehicles, the warning light will come on as the stock water temperature sensor is removed.
Depending on the vehicle, the engine may not start.
・In the case of 2-stroke vehicles, oil temperature cannot be measured because oil is used to lubricate the clutch and transmission.
・Please make sure that the wiring of the sensor does not come into contact with high temperature parts such as the exhaust and engine.
Particular attention should be paid to the model which requires to take wires from the drain bolt.
・If the stock sensor also serves as the fan switch, since the fan will not operate properly,
Do not replace the sensor in this kit.
Caution
*This product cannot be used with the temperature sensor Ver2.Review
0.0
/ 5
(0 Review)