Reviews
A little disappointed
They arrived in good time as usual when buying parts from Webike, I am a bit dissappointed the covers are not shiny and chrome looking like the picture, they are gray dull colour :( View detail
Fits: HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR, HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR
Made by POSH for safety!
I always used KITACO but this was cheaper so I bought it.
Compared to KITACO, it is the same as KITACO Large and seems to work fine.
View detail
Fits: HONDA CBX400F Integra, HONDA CBX550F/Integra, HONDA VF1000, HONDA VRX400 Roadster, HONDA VT250F/Integra, HONDA XL400V Transalp, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA Hornet 600, HONDA Magna (V-twin Magna), HONDA Magna (V-twin Magna), HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CBR400F, HONDA CBR400R
4 pieces for 640 yen! It is a high-cosmetics product!
I was worried because it was cheap, but I compared it with the one made by POSH that I ordered with it and confirmed that it was almost the same.
I feel that the processing of the gaps in the Rings is rougher and more GizaGiza than posh, but I don't mind because it is something to be crushed and used.
View detail
Fits: SUZUKI B-KING
Sounds good
I bought it here because Manufacturer is out of stock.
Material:It's aluminum, so you don't have to worry about rust, and it's lightweight.
It requires a little care in handling, but I think it's good in many ways.
View detail
It is conspicuous except for the fact that it is not.
The quality of the product is very high, and the feeling that it has been replaced is very high. Although only the lid is replaced, the anodized color and the product itself is elaborately made, so it is always in view, and it stands out and gives a sense of custom. The price may seem high because it is a lid, but it is effective. View detail
Fits: KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS
Diversion to ZX25R
The SUNSTAR set for ZX25R is the same diameter and thickness, but not enough, so it was diverted.
Not compatible, but can be installed only by using Spacer collar (5mm).
The 310Φ4.5mm→320Φ5.0mm change increases the weight to 1300g→1430g.
I had hoped that the weight of the inner housing would be reduced to aluminum, but the weight has increased by about 130g.
If you want to use it all the way to the edge, you need to adjust it with Shimetc.
The texture is much better, but Fee Ring did not feel any difference on about public roads.
View detail
First Red Pad with regular replacement.
Due to pad wear, the OEM Pad is replaced with a DAYTONARed Pad.
I used Golden Pad before, but this is my first time to use Red Pad because I felt like there was a lot of Damage in Rotor.
I don't know about wear resistance yet, but I feel that braking power is slightly increased over OEM.
I prefer this to the more intense effect.
Now we have to see how the wear resistance and aggressiveness to Rotor will be.
View detail
Fits: HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Car Type Exclusive Design
It was easy to install without any modification.
As per other impresarios.
If OEMGrip is used as is
Throttle Cable can be easily installed without removing it.
(I replaced it with an external one)
The Size of the Bar pad is a little short.
The options for replacement are
I thought it would be slightly less.
View detail
Fits: SUZUKI RMZ250, SUZUKI RM250, KAWASAKI KX450F, SUZUKI RM125, KAWASAKI KX250F, KAWASAKI KX250, KAWASAKI KX125, YAMAHA TRICKER, YAMAHA XT250X, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR450F, YAMAHA WR400, YAMAHA WR400-450F, YAMAHA WR450F, YAMAHA WR400, YAMAHA WR400-450F, YAMAHA WR250F
Very meaningful from the second time!
The Axel side is relatively normal as a grip with a collar, but this is the first time for me to see a clutch side with a collar.
I think it is very rare to buy a vst250sx, especially for vst250sx, but I think it is effective for people who want to quickly set up and remove the camera (probably for off-road use).
In my case, I used it with the end open, but this process was quite troublesome, so I think it is best to use it on a normal Motocross car that is off!
View detail
They are easily ruined; they don't even last a year.
The surface is scraped off immediately like erased Rubber.
No durability.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FE250, GASGAS MC250, HUSQVARNA FX450, GASGAS MC125, KTM 250XC-F, KTM 300XC TPI, KTM 250XC-W TPI, KTM 250XC-W, KTM 200XC-W, KTM 150XC-W/TPI, KTM 350XC-F, KTM 125XC-W, KTM 250XCF-W, KTM 300XC-W, KTM 300XC-W TPI, HUSQVARNA TC250, HUSQVARNA TC125, KTM 500XCF-W, KTM 350XCF-W
Improved Brake grip comfort
I installed it on my gasgas EC250 which I always use for forest road touring.
The OEM Brake lever did not give me a good supplemental grip, so I bought this lever to try it out.
Fit feeling of the fingers is good, and the feel when operating the Lever is very much improved.
Furthermore, the fact that the lever is foldable makes it difficult to break, which is good, and reduces the number of troubles during touring on forest roads.
The quality is good and I like the Large change.
The only drawback is that the price is very high.
View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Unbreakable Lever
I installed it on my gasgas EC250 which I always use for forest road touring.
With the NORMAL Lever, the supplemental grip was not comfortable, so I purchased this Lever.
As a result, the grip is improved and Lever is easier to operate.
It is also foldable, which makes it difficult for the lever to break, and reduces the number of problems when touring on forest roads.
The quality is very good and Parenthesis good Lever.
However, the price is very high, so the cosmetics are not very good.
View detail
Change from XC Protector
This is a change from XC Protector.
XC Protector cracks every time it falls, totaling 3Quantity:I bought a new Set.
I am trying this one because it cracks too quickly, but it also cracked too quickly.
I would like you to use more sticky Plastic because it is Protector.
View detail
Lever and hand protection
I installed it on my gasgas EC250 which I always use for forest road touring.
I often fall down while touring on forest roads, and I installed it to avoid damage to the lever.
In my experience, with the attached Clamp, the hand guard moves quickly and needs to be corrected every time it falls,
I've been using it for a while, Hand Guard Mount Bar Clamp Type We use a combination of the two.
I recommend the Large variation.
View detail
Fits: KTM XC250, KTM SX250, KTM XC300, KTM SX300, KTM EXC-W250 TPI, KTM XC-W250 TPI, KTM EXC-W300 TPI, KTM XC-W300 TPI, HUSQVARNA TX250, HUSQVARNA TX300, HUSQVARNA TE250i, HUSQVARNA TE300i, GASGAS EC250, GASGAS EC300
For Chamber and body protection
I installed it on a GasGas EC250 2023, which I always use for forest road touring.
Installation was quick and easy with Bolt On.
If you put on this product, which is a combination of Under Guard, Link guard, and Chamber Guard,
It protects the body of the car well even if it is slightly unBrown.
Recently, I have been interested in the world of hard enduro from forest road touring, and I have been riding in streams with large rocks,
The number of opportunities to run in gullys is increasing, and with Peetec's Guard attached, there is no chance of damaging the engine, chamber, body, links, etc., even if the vehicle is unbroken.
The only drawback is that mud and leaves can get into the Guard.
This could be improved to a Large width by machining a thin aluminum plate to prevent mud from getting in.
With this level of protection, I feel that the 40,000 yen expense is justified.
View detail
Size is delicate for my Motorcycle.
The space under the Seat of VSTROM250SX is a little large, so I decided not to paste it. I ended up throwing it into the Rear box. I could have used a normal container if I wanted to. View detail
Screen replacement required
I have been using High Widow Screen, replacing it all the time. I am not young and I buy OEM.
It's an extra step, but I'm going to replace it at the same time when I exchange it.
I took a picture of the part numbers of the parts. The quantity is for 6 pieces each.
It will be. Reference.
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
for better or worse
Parts as Design, for better or worse!
Refreshing around Rear
Side Back will not be able to be attached!
View detail
Parenthesis OK
This is especially true for off-road motorcycles, but if the License Plate is simply attached to the Fender, it will bend easily at the slightest touch.
For this purpose, various license plate holders are available, but to be honest, they are just license plates, so there is no need to demand such high quality (they are not visible anyway), and it is difficult to choose the right product.
This Carbon Plate-like back plate by MotoServiceEdge has a Carbon-like finish on the surface, which looks really cool at a glance, like a Carbon plate.
The size is a little larger than the License Plate. Carbon-like." pattern is a little visible.
The price is reasonable and I recommend this!
View detail
Fits: HONDA GROM, HONDA DAX125, HONDA Monkey125, HONDA Monkey125
What special tools are required?
While working according to the Installation Instruction Manual, a special TorqueScrew tightening tool was required, although fortunately a hand-held tool of the same type could be substituted.
I think that a regular commercially available screw would be sufficient for this 4-point screw.
View detail