Reviews
Good for a dress-up.
It looks good with a hint of color.
As for performance, I'm not sure because I can't feel it.
It is easy to install and does not leak after use.
It has basic performance.
It may be expensive, but I think it is good for dress-up purposes.
View detail
I need more tools.
There are three hoes, and the longest one might be a bit difficult. View detail
Motorcycle looks like a Large!
I was thinking of changing the coolant water for the summer, but the car is getting old, so I decided to change the RadiatorHose as well.
it is exchanged 。 I don't rely on the cooling effect in terms of performance, but I think it's good from a visual point of view.
Motorcycle looks like a large cut.
The texture is very good and the Hose itself seems to be durable.
The hose length of Upper Side was a little short and it did not reach to the stopper of Joint.
I stopped it firmly with Clamp.
I drove about 1,000km after exchanging it, but there is no leak etc. so far.
If it's too long, I can cut it, but if it's too short, there's nothing I can do. By the way, the vehicle is MD38 CRF.
View detail
If the length is not enough, please contact the Manufacturer.
I think it was a mistake by the line of the packing, but there was a hose that was not long enough, so I could not install it, and when I contacted the Manufacturer, they seemed to have packed the parts that were not long enough, and there was trouble by the exchange of the commodity, and it took a lot of time to install it. It took me a long time to install it. The Manufacturer seemed to have confirmed the mistake and responded to my inquiry with an exchange immediately. View detail
Feel the durability and low flow resistance of SiliconeHose!
I chose these for the Refresh on my 2007 wr250X with less than 16,000 miles on it. OEM hose would have been fine, but I wanted the durability and low flow resistance of SiliconeHose, so I went with these. Blue looks like Race ish. I have no complaints about this product as I have used it before on other vehicles. View detail
Color Coordinates
I chose Blue to match the exterior color.
I'm happy with the change in atmosphere.
Functionally, nothing has changed.
Easy to install, but the hose band on the E/G side may be difficult to tighten.
View detail
Looks good, stiffer than stock
I bought this hose kit from DRC because my old OEM hose is almost 10 years old. It fits like an OEM hose but with of course the added bling points. This looks good on the WR250R and I believe it will make your engine bay look better too regardless of brand and model. Make sure to buy new clamps for a tighter fit. +Looks really good +Easy to install -No included clamps View detail
DRC DRC Radiator hose kit
When I moved the LLCReserver tank, I changed it anyway.
It may be quite tough to maneuver if you have a Slider attached.
View detail
MOTARD, I know you're persistent about Motocross, but it's a zeta?
I chose this one to protect the Engine on my 2012 crf250l for the Motocross course.
I don't have a water temperature gauge on it, so I don't know how well it performs, but I believe the cooling effect was good because for a year before I bought a new motorcycle, it did its best to keep the engine from blowing even when I was running at full throttle on every holiday.
Still, I was most pleased with the beautiful look.
View detail
DRC radiator hose kit
well i received the package very short time.hose kit are very easy to install same as a normal. DRC racing product are number one in the world. this kit are strong and high quality product.color are very nice. i like very much. i will recommend, thanks we bike.. View detail
It's very obvious
The WR250X has been gradually turned blue, and I changed it at the same time as the Coolant replacement
To install, loosen or remove the Hose Band with a Phillips Screwdriver Just replace it with an OEMHose
But each hose does not come off and does not fit, and the tool goes into the engine side of the long hose No, the long Hose is thicker than the OEM, or the Hose Band needs to be in a better position than the OEM I struggled with it all
I removed the exhaust pipe and exhaust system myself
The position of the Hose Band and the installation of the Hose is in a good place
Exhaust pipe, exhaust system desorption and a little bit longer You may want to have a Hose Band
If you mark where the Hose was originally attached, it will be easier to see how far you can screw it in
It looks almost invisible when you're on it, but from the side, it's very different
I am Large satisfied because I can look at it and grin
View detail
The World of Self-Satisfaction
The Radiator hose is quite large, so it stands out! It's a red motorcycle, so I used blue as an extra color I like it very much
It just took me quite a while to order and receive it
Quantity:Pair (for Left and Right) You have to remove the Radiator to change the Hose to connect the Radiator of You need to warm up the Hose with a gun or hot water to get it to go in properly
I don't feel the performance of the product is anything special...I'm just self satisfied
View detail
It's exciting, isn't it?
For CRF250L
I've used it on my KLX250, so it was a no-brainer
Purchased
Cosmetically, I like the parenthesis of the view
View detail
Appearance Up
Changing the hose will give it a more custom look
First of all, the packaging, I'm thankful that it's closely packed with Vinyl to prevent dust from getting inside the Hose It is
It is not easy to install the Radiator, because the Radiator liquid can't be leaked
I gripped it so hard that it lost its luster
I put in a little Parts cleaner while spraying it in the middle of the process
It took some time to install and tighten the Horse Band on the Engine side
It's a simple process, but it took a long time, but the color of Hose was changed from Black to I was satisfied with the blue color, as it makes me look like Race ish
View detail
I wanted to dress-up and replace it
Although there is no problem in particular, it has been four years since I bought it, I thought I would replace Coolant I bought a dress-up on the spur of the moment … it's a 2015 model I was able to install it with no problems However, compared to the OEM, the longer Hose is cut a few millimeters longer than the (It cuts easily.) I matched the length The most tedious part was Quantity:Pair (for Left and Right) The place where you can't see it unless you remove the shroud Why do you want to take out Tank? (Float.) I replaced it It's not easy to get your hand in there, so I took off one of the Radiator and put the Hose on I think you should attach it to the root and then push the other one in (I did.) The rest of the place is just a few millimeters cut to fit the handling, and the Hose is thicker than the OEM It's solid I'm happy with the way it looks Now I just wish the price was a little cheaper View detail
Parenthesis better!
It was a challenge to install, but I'm happy with the way it looks
Because it is a little thicker than the OEM Product, the hose band is just barely there
To lock the Band to fix the Engine side of the long Hose
It was fiddly
A slightly longer Band will make it easier to prepare a slightly longer Band
View detail
It's luxurious.
It's a bit disappointing because there is only one color I want blue or black, but I couldn't choose, so I bought the red one. The product is satisfactory. I only want one blue color or black color. I did not want to buy it because I could not choose it. I bought it because it was cut to the right size. It is very satisfactory because it is just bolt on. The product is satisfactory.(translated by Google Translator) View detail
Good vibes
One of the Parts I thought about replacing LLC.
As for installation, we only need to replace with OEM Product so we did not need processing.
As in other impressions, Band behind the Engine was quite a difficult enemy, but I was able to work with Ratchet using Universal joint and extension.
The point is whether it depends on the tool?
Hose is thick, so the Hose Band also does not reach the water pump part at Size 25 of the OEM, exchange it for the Size 32 of the Stainless and worry.
It is satisfying because I think that I've improved my appearance much better.
But, I guess it will not be a little cheaper.
View detail
When it fades, you can set it as a guide for replacement ○
Three years after installing it faded Red became Pink like red ham
Exchange along with waist OH.
There is a hang to tighten the Thermostat side Band, even a beginner can exchange it.
Just regularly check tightening again (There is no guarantee that it will not leak because it is Silicon)
If you worry about leakage OEM Rubber is safe.
View detail
very good
I used it for CRM 250 rm. Since the product is only 96 years, it can not be helped ‥. Left Side Only the radiator's Hose is short and rm (1991) It did not suit. It is impossible to walk around! It is possible to wear it sparingly, but because it feels loose, pressure leaks if you do not tighten the band securely. The next morning the jiwi waga drooped (Lol) I wanted the slender Hose at the top to be set as well. View detail