Reviews
10% performance, 90% looks!
[How is it used?
Used on KLX250Final edition 16
I bought it because when I crashed during an Enduro race, the OEM hose tore and leaked coolant, making it impossible to run.
It looks thicker and stiffer than OEM, so here's hoping it won't tear next time!
Was the one you received as per Image?
It's just like the image!
It is a beautiful dark bright Blue color.
Was the installation difficult?
Coolant needs to be unplugged, so buy Coolant at the same time!
https://www.webike.net/sd/1241771/
The length is a bit longer than OEM, so I shortened it a bit with Cutter.
Easy to cut.
Blowing Silicon spray makes it easier to insert the Hose.
How was your experience with it?
I am satisfied with the improved appearance.
View detail
Motorcycle looks like a Large!
I was thinking of changing the coolant water for the summer, but the car is getting old, so I decided to change the RadiatorHose as well.
it is exchanged 。 I don't rely on the cooling effect in terms of performance, but I think it's good from a visual point of view.
Motorcycle looks like a large cut.
The texture is very good and the Hose itself seems to be durable.
The hose length of Upper Side was a little short and it did not reach to the stopper of Joint.
I stopped it firmly with Clamp.
I drove about 1,000km after exchanging it, but there is no leak etc. so far.
If it's too long, I can cut it, but if it's too short, there's nothing I can do. By the way, the vehicle is MD38 CRF.
View detail
Looks good, stiffer than stock
I bought this hose kit from DRC because my old OEM hose is almost 10 years old. It fits like an OEM hose but with of course the added bling points. This looks good on the WR250R and I believe it will make your engine bay look better too regardless of brand and model. Make sure to buy new clamps for a tighter fit. +Looks really good +Easy to install -No included clamps View detail
It's very obvious
The WR250X has been gradually turned blue, and I changed it at the same time as the Coolant replacement
To install, loosen or remove the Hose Band with a Phillips Screwdriver Just replace it with an OEMHose
But each hose does not come off and does not fit, and the tool goes into the engine side of the long hose No, the long Hose is thicker than the OEM, or the Hose Band needs to be in a better position than the OEM I struggled with it all
I removed the exhaust pipe and exhaust system myself
The position of the Hose Band and the installation of the Hose is in a good place
Exhaust pipe, exhaust system desorption and a little bit longer You may want to have a Hose Band
If you mark where the Hose was originally attached, it will be easier to see how far you can screw it in
It looks almost invisible when you're on it, but from the side, it's very different
I am Large satisfied because I can look at it and grin
View detail
The World of Self-Satisfaction
The Radiator hose is quite large, so it stands out! It's a red motorcycle, so I used blue as an extra color I like it very much
It just took me quite a while to order and receive it
Quantity:Pair (for Left and Right) You have to remove the Radiator to change the Hose to connect the Radiator of You need to warm up the Hose with a gun or hot water to get it to go in properly
I don't feel the performance of the product is anything special...I'm just self satisfied
View detail
Parenthesis better!
It was a challenge to install, but I'm happy with the way it looks
Because it is a little thicker than the OEM Product, the hose band is just barely there
To lock the Band to fix the Engine side of the long Hose
It was fiddly
A slightly longer Band will make it easier to prepare a slightly longer Band
View detail
Good vibes
One of the Parts I thought about replacing LLC.
As for installation, we only need to replace with OEM Product so we did not need processing.
As in other impressions, Band behind the Engine was quite a difficult enemy, but I was able to work with Ratchet using Universal joint and extension.
The point is whether it depends on the tool?
Hose is thick, so the Hose Band also does not reach the water pump part at Size 25 of the OEM, exchange it for the Size 32 of the Stainless and worry.
It is satisfying because I think that I've improved my appearance much better.
But, I guess it will not be a little cheaper.
View detail
very good
I used it for CRM 250 rm. Since the product is only 96 years, it can not be helped ‥. Left Side Only the radiator's Hose is short and rm (1991) It did not suit. It is impossible to walk around! It is possible to wear it sparingly, but because it feels loose, pressure leaks if you do not tighten the band securely. The next morning the jiwi waga drooped (Lol) I wanted the slender Hose at the top to be set as well. View detail
It looks nice
D-TRACKER (98) It attached to.
Since carburetorWarmer has been removed "For dTRACKERX" I bought.
Because there is a slightly too long Hose, Cut it with Cut to install it.
Tank can not be installed unless it is removed - - Maybe.
It looks pretty good.
View detail
Is not it high?
I do not know what will change like a TRAIL car, but I purchased it mainly for Dress-up purpose. Noticeably Parenthesis Is not it expensive a bit, is it not good to lower 2000 yen yet? DRC?
With that and the Instruction Manual there is nothing, so let's do our best and install it! Hose is also a stiff one so we will fight hard! Radiator hose pliers are necessary!
In the case of KLX 250, Radiator hose under Tank was a little Large strange!
View detail
Out of performance
Since the car body is Black type, it is worn by Wai Point. You can save Cost by doing it yourself. Goods are relatively easy to install LargeSmall 3pcs, the tool can be used if you remove Hose in front of Left Side after Screw does not turn after Engine. When installing Screw to face downwards thinking about the next removal
Appearance of Customization Performance is not different from NORMAL
View detail
There is Impact!
I wanted to use Red at PointPoint, so I exchanged it.
There was Impact stand out more than expected!
It was a bit difficult to install in terms of products.
There is no Instruction Manual which part will be attached to which part. (It seemed to be a wisdom ring)
Because Hose diameter is a little thick, I think that it is difficult to install in OEM's Hose Band. In my case I bought an outside Hose Band.
Because the length of Hose was also a little long, I installed it while cutting in kind in kind.
View detail
Exchange is also easy
Although I exchanged for DRM's RMX before, it took quite a lot of time with Hose alignment and Length adjustment, but this time I installed it on WR with few Hose number.
Because the diameter on the pump side is different, the thicker side becomes the Pump side. OEM's Jubbi Re-bumped could be used as it was, but on the Cylinder side only OEM replace it with 1 Size Large for the Limit thickness.
It was not Kunekune hose and it was easy to exchange.
It is inexpensive as a price range, but I want a simple manual for those with a different diameter or number.
View detail
Yeah, it is flashy.
Band on the Engine side of the long Hose was difficult to close. I thought that it would be good if a 5 mm long Hose Band was attached.
I think that it looks a bit flashy. It seems that it seems to be fast as compared with Black. Race ish I thought that who wants to put out the item is suitable.
View detail
The Hose and form of a NORMAL are also the same in beautiful red.wearing also came out exactly and it has ended it easily. It did not understand it troubled where a Coolant should have been extracted from, but it has removed, with liquid poured in
The Hose and form of a NORMAL are also the same in beautiful red.
wearing also came out exactly and it has ended it easily.
It did not understand it troubled where a Coolant should have been extracted from, but it has removed, with liquid poured in.
View detail
Since an authentic positive one was becoming old, it exchanged.Although there is no operation manual, the form of this Hose is as a NORMAL.Direction of the Logo is satisfactory toward the outside exactly! The Parenthesis of the Hose of DRC is better
Since an authentic positive one was becoming old, it exchanged.Although there is no
operation manual, the form of this Hose is as a NORMAL.Direction of the Logo is satisfactory toward the outside exactly! The Parenthesis of the Hose of DRC is better than the black of
pure Hose! Thermal expansion also prevents
hardness as firmly as a NORMAL is not a ratio.
Blue is also a Cool although I used red! When there was a color of
each Manufacturer, it was better, but *
you with the ability of two kinds to also be chosen [ appreciated ] are recommended!!
View detail
Since an authentic positive one was becoming old, it exchanged.Air omission of LLC after the picture exchanges Hoses -- mono-. The form of this Hose is as a NORMAL.Direction of the Logo is satisfactory toward the outside exactly! The Parenthes
Since an authentic positive one was becoming old, it exchanged.Air omission of LLC after the
picture exchanges Hoses -- mono-.
The form of this Hose is as a NORMAL.Direction of the
Logo is satisfactory toward the outside exactly! The Parenthesis of the Hose of DRC is better than the black of
pure Hose! Thermal expansion also prevents
hardness as firmly as a NORMAL is not a ratio.
Blue is also a Cool although I used red! When there was a color of
each Manufacturer, it was better, but
* [ with the ability of two kinds to be chosen / appreciated /, either ]
you are recommended!!
View detail
another -- this Parts -- a NORMAL -- even when -- Although functioned enough -- Design serious consideration! attachment -- the outside of the Band of a Normal hose -- carrying out -- an one-place tool does not arrive easily. If a few is shifted at the t
another -- this Parts -- a NORMAL -- even when -- Although functioned enough -- Design serious consideration! attachment -- the outside of the Band of a Normal hose -- carrying out -- an one-place tool does not arrive easily. If a few is shifted at the time of wearing, is it next easy? I feel that it was felt refreshed for after [ a little ] wearing. View detail
[a Webike Monitor] -- although I think that I will be the raw material and engine performance which exceed the original manufacturer's product -- -- it is not a Parts which can feel it -- it came out and purchased as sushi and a Dress-u
[a Webike Monitor] -- although I think that I will be the raw material and engine performance which exceed the
original manufacturer's product --
-- it is not a Parts which can feel it -- it came out and purchased as sushi and a
Dress-up parts.
View detail
[Webike Monitor] It is conspicuous by the Red color. It can exchange easily and does not become dirty from a NORMAL. It is cheaper than a brand item besides , and I recommend you.
[Webike Monitor] It is conspicuous by the
Red color.
It can exchange easily and does not become dirty from a NORMAL.
It is cheaper than a brand item besides
, and I recommend you.
View detail