Reviews
It's just a different look ….
I decided to replace the hose with a new one in conjunction with RadiatorCleaning and Coolant replacement for DRZ400sm k9, which had probably never been maintained. I wanted to change the appearance as much as possible, so I bought a DRC Hose set.
I really don't think it will be any different from the OEM in terms of performance, just a different look.
Since the coolant must be removed when replacing the coolant, it is best to change it together with the coolant replacement time.
Or when you plant a Water Temperature Sensor between hoses.
Well, we have to say goodbye to coolant anyway.
The handling is the same as the OEM, so there are no problems.
Band is also diverted from OEM as it is.
If I had to say, this Hose was more difficult to push into the back than the OEM Hose.
Maybe because it's brand new.
Reviewing the current situation since the replacement has been in place for 3-4 months, I do not see any deterioration of the hose itself, but the color has already faded.
It was bright red when purchased but has faded.
I think it's especially - because it's a Red color.
Recommended for those who want to change their look and feel.
View detail
The color is so-so Parenthesis nice
Radiator hose and Coolant replaced at the same time. I like the color Parenthesis. The performance is the same, but the feeling is a little different. I had a hard time inserting the hose clamp at the back of the engine, but it can be replaced with a normal tool. Please note that you will need to replace the OEM Drain Washer after you remove the Coolant. View detail
Great look, fits perfect
The hoses are much thicker than stock.Fits perfectly and looks good. If these hold up I don't know why you would spend so much more on other brands. This is a very nice product and solid upgrade from stock hoses for a competitive price. The kit included two hoses for my machine and eliminated the stock thermostat assembly and a bunch of clamps and hoses. While red was the only color choice, it looks pretty good. The hose shapes and sizes are preformed properly requiring little effort for install and clearance. rubber hose hardens over time and is difficult to remove, silicone hose is very easy to disassemble.My only dislike is that the silicone is easily chewed up by the hose clamps.I'd buy these again. View detail
Hose
Bonsai Parts with only one color Easy to install View detail
Replaced due to discoloration
I replaced it because it was Brown.
The product is sensitive to ultraviolet rays and discolors, so be careful if the product is parked in a garage that is often exposed to sunlight.
View detail
10% performance, 90% looks!
[How is it used?
Used on KLX250Final edition 16
I bought it because when I crashed during an Enduro race, the OEM hose tore and leaked coolant, making it impossible to run.
It looks thicker and stiffer than OEM, so here's hoping it won't tear next time!
Was the one you received as per Image?
It's just like the image!
It is a beautiful dark bright Blue color.
Was the installation difficult?
Coolant needs to be unplugged, so buy Coolant at the same time!
https://www.webike.net/sd/1241771/
The length is a bit longer than OEM, so I shortened it a bit with Cutter.
Easy to cut.
Blowing Silicon spray makes it easier to insert the Hose.
How was your experience with it?
I am satisfied with the improved appearance.
View detail
Color Coordinates
I purchased it here and brought it to my favorite Motorcycle shop for replacement. View detail
Good for a dress-up.
It looks good with a hint of color.
As for performance, I'm not sure because I can't feel it.
It is easy to install and does not leak after use.
It has basic performance.
It may be expensive, but I think it is good for dress-up purposes.
View detail
I need more tools.
There are three hoes, and the longest one might be a bit difficult. View detail
Motorcycle looks like a Large!
I was thinking of changing the coolant water for the summer, but the car is getting old, so I decided to change the RadiatorHose as well.
it is exchanged 。 I don't rely on the cooling effect in terms of performance, but I think it's good from a visual point of view.
Motorcycle looks like a large cut.
The texture is very good and the Hose itself seems to be durable.
The hose length of Upper Side was a little short and it did not reach to the stopper of Joint.
I stopped it firmly with Clamp.
I drove about 1,000km after exchanging it, but there is no leak etc. so far.
If it's too long, I can cut it, but if it's too short, there's nothing I can do. By the way, the vehicle is MD38 CRF.
View detail
If the length is not enough, please contact the Manufacturer.
I think it was a mistake by the line of the packing, but there was a hose that was not long enough, so I could not install it, and when I contacted the Manufacturer, they seemed to have packed the parts that were not long enough, and there was trouble by the exchange of the commodity, and it took a lot of time to install it. It took me a long time to install it. The Manufacturer seemed to have confirmed the mistake and responded to my inquiry with an exchange immediately. View detail
Feel the durability and low flow resistance of SiliconeHose!
I chose these for the Refresh on my 2007 wr250X with less than 16,000 miles on it. OEM hose would have been fine, but I wanted the durability and low flow resistance of SiliconeHose, so I went with these. Blue looks like Race ish. I have no complaints about this product as I have used it before on other vehicles. View detail
Color Coordinates
I chose Blue to match the exterior color.
I'm happy with the change in atmosphere.
Functionally, nothing has changed.
Easy to install, but the hose band on the E/G side may be difficult to tighten.
View detail
Looks good, stiffer than stock
I bought this hose kit from DRC because my old OEM hose is almost 10 years old. It fits like an OEM hose but with of course the added bling points. This looks good on the WR250R and I believe it will make your engine bay look better too regardless of brand and model. Make sure to buy new clamps for a tighter fit. +Looks really good +Easy to install -No included clamps View detail
DRC DRC Radiator hose kit
When I moved the LLCReserver tank, I changed it anyway.
It may be quite tough to maneuver if you have a Slider attached.
View detail
MOTARD, I know you're persistent about Motocross, but it's a zeta?
I chose this one to protect the Engine on my 2012 crf250l for the Motocross course.
I don't have a water temperature gauge on it, so I don't know how well it performs, but I believe the cooling effect was good because for a year before I bought a new motorcycle, it did its best to keep the engine from blowing even when I was running at full throttle on every holiday.
Still, I was most pleased with the beautiful look.
View detail
DRC radiator hose kit
well i received the package very short time.hose kit are very easy to install same as a normal. DRC racing product are number one in the world. this kit are strong and high quality product.color are very nice. i like very much. i will recommend, thanks we bike.. View detail
It's very obvious
The WR250X has been gradually turned blue, and I changed it at the same time as the Coolant replacement
To install, loosen or remove the Hose Band with a Phillips Screwdriver Just replace it with an OEMHose
But each hose does not come off and does not fit, and the tool goes into the engine side of the long hose No, the long Hose is thicker than the OEM, or the Hose Band needs to be in a better position than the OEM I struggled with it all
I removed the exhaust pipe and exhaust system myself
The position of the Hose Band and the installation of the Hose is in a good place
Exhaust pipe, exhaust system desorption and a little bit longer You may want to have a Hose Band
If you mark where the Hose was originally attached, it will be easier to see how far you can screw it in
It looks almost invisible when you're on it, but from the side, it's very different
I am Large satisfied because I can look at it and grin
View detail
The World of Self-Satisfaction
The Radiator hose is quite large, so it stands out! It's a red motorcycle, so I used blue as an extra color I like it very much
It just took me quite a while to order and receive it
Quantity:Pair (for Left and Right) You have to remove the Radiator to change the Hose to connect the Radiator of You need to warm up the Hose with a gun or hot water to get it to go in properly
I don't feel the performance of the product is anything special...I'm just self satisfied
View detail
It's exciting, isn't it?
For CRF250L
I've used it on my KLX250, so it was a no-brainer
Purchased
Cosmetically, I like the parenthesis of the view
View detail