Reviews
To use Stem Mount.
Since I added OVER's Separate handle, I could no longer attach the OEM Mount bar, so I bought it to attach QuadLock's Stem Mount.
It was not originally a compatible car model, but after looking at the Pitch and Diameter from the Net information, it was applicable.
Note that after the conclusion of the contract, it will not be trued up.
Compared to the OEM Cap Nut, which had a dowdy appearance, the new Cap Nut is more pleasing to the eye because it is one point of reference that matches the color of the car body.
Since the material is aluminum, you may want to be careful about overtorque when fastening. (The OEM nut is 65 Nm, but...)
View detail
Fits: HONDA XR400 Motard, HONDA CT125 HUNTER CUB, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR230 Motard, HONDA XR250, HONDA CRM50, HONDA CRM80, HONDA XR230, HONDA CRM250AR, HONDA CRM250R, HONDA CRF250M, HONDA CRF150RII, HONDA CRF250L, HONDA CRF150R, HONDA CR85R, HONDA CR85R 2, HONDA CRF1100L AFRICA TWIN ADV SPORTS
Cap is also needed
Since it is necessary to remove the Handlebar, it is recommended to install it at the beginning of the work because it is strange to work Large when various things are attached to the Handlebar.
I had a Grip heater on mine and it was a bit of a hassle.
In addition, the Cap which attaches to the Stem hole is also Quantity because there is a feeling that it is a little short only with Nut.:I think you should buy Set.
View detail
Fits: HONDA XR400 Motard, HONDA CT125 HUNTER CUB, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR230 Motard, HONDA XR250, HONDA CRM50, HONDA CRM80, HONDA XR230, HONDA CRM250AR, HONDA CRM250R, HONDA CRF250M, HONDA CRF150RII, HONDA CRF250L, HONDA CRF150R, HONDA CR85R, HONDA CR85R 2, HONDA CRF1100L AFRICA TWIN ADV SPORTS
For the use of Stem MountAttachment and also for Dress-up.
[How is it used?
I use it on my JC75 Honda GROM. I wanted to use Stem Mount's Quadlock Smartphone Holder, but GROM is OEM with Cap Nut, so Stem hole is blocked. I wanted to use Stem Mount QuadlockSmartphone Holder, but GROM is OEM Cap Nut and Stem hole is blocked.
The color of Anodized is also good, so I think it is visually Accent and has Dress-up effect.
Was the one you received as per Image?
I had imagined that it was lightweight because it was Aluminum Nut, but it was the impression that it was even lighter than I thought.
Was the installation difficult?
It is not difficult to install though it is necessary to prepare the SocketNut of LargeSize which has few chances to appear. I thought that it was necessary to be careful because the Anodized of the part which came in contact with Wrench might be damaged if I did not tighten it by biting a thin cloth etc.
[Opinions and requests to Manufacturer
When I'm not using the Smartphone Holder, I'm worried about the inside of the Stem being visible while penetrating, so I put a suitable grommet in it to hide it, but it's not good. Can't some manufacturer provide me with a stylish cap...?
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker X, KAWASAKI KLX125, KAWASAKI KX85, KAWASAKI KX85-II, SUZUKI 250SB, SUZUKI RM85, KAWASAKI KLX110L, KAWASAKI D tracker, HONDA XR50R (for competition), HONDA CRF50F, KAWASAKI KLX150, KAWASAKI KLX250, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX65, KAWASAKI KLX110
Firm and Anodized
If you thought it would be a Handlebar on the ride, it would be hidden It's just a solid presence, solidly anodized and doesn't fade in the sun It's not a nut, but it's a customizable shape, and I like Large View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker X, KAWASAKI KLX125, KAWASAKI KX85, KAWASAKI KX85-II, SUZUKI 250SB, SUZUKI RM85, KAWASAKI KLX110L, KAWASAKI D tracker, HONDA XR50R (for competition), HONDA CRF50F, KAWASAKI KLX150, KAWASAKI KLX250, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX65, KAWASAKI KLX110
It was a little difficult to install
I bought it as a PetitCustom product, but I need to replace it with a Handlebar Post must be removed
Fortunately, we were able to swap together at Timing to replace the Rubber killer
View detail
Fits: HONDA XR400 Motard, HONDA CT125 HUNTER CUB, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR230 Motard, HONDA XR250, HONDA CRM50, HONDA CRM80, HONDA XR230, HONDA CRM250AR, HONDA CRM250R, HONDA CRF250M, HONDA CRF150RII, HONDA CRF250L, HONDA CRF150R, HONDA CR85R, HONDA CR85R 2, HONDA CRF1100L AFRICA TWIN ADV SPORTS
ZETA Stem Nut
Have been using this for a month now. The fit is just right, no issues with the thread and finish. Screws on readily and with the stem cap it looks great in dual colour. View detail
Fits: HONDA XR400 Motard, HONDA CT125 HUNTER CUB, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR230 Motard, HONDA XR250, HONDA CRM50, HONDA CRM80, HONDA XR230, HONDA CRM250AR, HONDA CRM250R, HONDA CRF250M, HONDA CRF150RII, HONDA CRF250L, HONDA CRF150R, HONDA CR85R, HONDA CR85R 2, HONDA CRF1100L AFRICA TWIN ADV SPORTS
fit perfectly on my msx 125
nicely machined and anodized steering stem nut. much lighter than the stock msx nut (12 grams instead of 37 grams) good value for money,fast shipping to Belgium(11 days) happy with the purchase. View detail
Fits: KAWASAKI KLX110L, SUZUKI RM85, KAWASAKI KLX250, KAWASAKI KX85-II, KAWASAKI KX85, KAWASAKI KLX110, KAWASAKI KX65, KAWASAKI KX125, KAWASAKI KX250, SUZUKI 250SB, KAWASAKI KLX150, KAWASAKI KLX125, KAWASAKI D Tracker 125, HONDA XR50R (for competition), KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, SUZUKI RM85, HONDA CRF50F
Purchase for Dress-up
Stem Nut of GSR 250 is so plain that I purchased it for Dress-up purpose
I made the color to Blue according to the car body
Also, I left the possibility to attach Stem Mount with HoleNut
We purchase Stem Cap at the same time as this item
View detail
Fits: HONDA XR400 Motard, HONDA CT125 HUNTER CUB, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR230 Motard, HONDA XR250, HONDA CRM50, HONDA CRM80, HONDA XR230, HONDA CRM250AR, HONDA CRM250R, HONDA CRF250M, HONDA CRF150RII, HONDA CRF250L, HONDA CRF150R, HONDA CR85R, HONDA CR85R 2, HONDA CRF1100L AFRICA TWIN ADV SPORTS
Light weght good item
Nicly fit. Good finishing. Light weight item. Nicely compatible with oem xr product. Good value to the bike. Well fitting with zeta stem cap View detail
Fits: HONDA CR85 R, HONDA CR85 R II, HONDA CRF150R, HONDA CRF150RII, HONDA CRF250L, HONDA CRF250M, HONDA CRM250AR, HONDA CRM250R, HONDA CRM50, HONDA CRM80, HONDA XR230, HONDA XR250, HONDA XR250 Baja, HONDA XR400 Motard, HONDA CT125 HUNTER CUB, HONDA CRF1100L AFRICA TWIN ADV SPORTS, HONDA XR230MOTARD, HONDA XR250MOTARD, HONDA XL750 TRANSALP
I am firm
Size and accuracy are good as well. It is six months but it is clean without fading. I think that a little individuality may come out together with Stem Cap. View detail
Top Bridge became gorgeous!
- The deciding factor of purchase!
I ordered BikersTop bridge center nut at Sale last month, but I received a notification that the delivery date is behind the original schedule. Since it was a product which had been concerned for a long time ago, I contacted it so that BikersTop bridge center nut could change to the item of this one, I changed it quickly.
- Impression actually used
It is spectacularly shining as one point of Top Bridge of a car of your favorite car.
Company product ZETAStem Nut Cap (Black) Also installed at the same time, it became really good with Two-tone color. Steering performance got improved! Etc. There is no Up function, self satisfaction is over 100%!
- Others - Installation of Vise)
I will not use OEMStem Nut tool normally 29! ZETAStem Nut installation tool Size is also 32 I do not normally use. You can not use LargeGold for tools that you do not normally use. So I discovered a tool of 698 yen in the last 3 surveys of neighborhood mass merchandisers. There was no 29 Size but there were 30 to 32, but there was a certain idea 30 - I bought 32 and came back.. A certain idea - - - I rolled a Masking tape around OEMStem Nut to fit Tool Size 30 and removed OEMStem Nut tightened with High Torque with Spinner Handlebar. OEMStem Nut removed and tool removed without licking. After removal, we will install ZETAStem Nut, but we can not afford to scratch the new ZETAStem NutAnodized - - - So, curing with the previous Masking tape and finishing the tightening with Torque wrench. With excitement while removing my masking tape for curing - - - "Oh, what a fucking thing ~" I could install it without damaging Anodized intact.
View detail
It shines.
Although performance does not change at all, Handlebar surroundings are very shiny. Although it is an appearance Dress-up parts, satisfaction is high when you see it even when you are on board.
Box wrench should prepare Glasses so you can tighten with a fair Torque. MONKEY and Spanner get scratched into your Anodized.
View detail
Only looks
Performance does not change. Dress-up only ,,,
OEM is 27 mm and this product is 30 mm. If you do not install it with Glasses or Socket, Anodized will be scratched. Because it is Stem Nut tightened with a pretty Torque, it will be full of scratches unless it is a proper tool.
It looks nice. Dress-up around Handlebar is quite substantial in places you can see even if you ride.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker X, KAWASAKI KLX125, KAWASAKI KX85, KAWASAKI KX85-II, SUZUKI 250SB, SUZUKI RM85, KAWASAKI KLX110L, KAWASAKI D tracker, HONDA XR50R (for competition), HONDA CRF50F, KAWASAKI KLX150, KAWASAKI KLX250, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX65, KAWASAKI KLX110
It is only looks
It is an inconspicuous Fashion.
There is no performance improvement at all.
I need to tighten with the prescribed Torque, but I did not have such a huge Socket on my Socket wrench set so I bought it.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker X, KAWASAKI KLX125, KAWASAKI KX85, KAWASAKI KX85-II, SUZUKI 250SB, SUZUKI RM85, KAWASAKI KLX110L, KAWASAKI D tracker, HONDA XR50R (for competition), HONDA CRF50F, KAWASAKI KLX150, KAWASAKI KLX250, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX65, KAWASAKI KLX110
Mounting on KLX 250
Purchased as Dress-up around Handlebar where rust and dirt have become conspicuous.
It will not be seen much with Handlebar,
Without Stem Cap, rust will be conspicuous unnecessarily.
We recommend you to install it simultaneously with Stem Cap.
I like my color very much and I like it.
View detail
I have not purchased it here
Because it was only Blue and Red, I bought it with another shop. The color is Black. I had the opportunity to desorb Handlebar so I bought it later.
Separately I thought whether NORMAL would be okay but I thought it looks pretty good after replacement. OEMNut size is surely 27 mm purchased Nut size is 30 mm. Because it is a pretty tightening Torque, I trained with Nut with Masking tape and then tightened to prevent Wound.
View detail
Fits: HONDA XR400 Motard, HONDA CT125 HUNTER CUB, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR230 Motard, HONDA XR250, HONDA CRM50, HONDA CRM80, HONDA XR230, HONDA CRM250AR, HONDA CRM250R, HONDA CRF250M, HONDA CRF150RII, HONDA CRF250L, HONDA CRF150R, HONDA CR85R, HONDA CR85R 2, HONDA CRF1100L AFRICA TWIN ADV SPORTS
Dress-up with beautiful AnodizedParts
CRF125F (2014) I attached it to.
Simply changing OEMStem Nut to this AnodizedParts will make Stem part misidentified.
It is cheap, it's a good Dress-up parts of Cost performance which makes it easy to change the image of Motorcycle.
The Lineup table does not have the notation CRF125F yet,
Once I checked it, I could definitely install it with this ProductNo thing.
Be careful not to make a mistake in ProductNo.
View detail
It is a beautiful Anodized color
I made it a brilliant color of One point. OEM's Stem Nut is 30 Gram, this Zeta's Stem Nut is 10 Gram, the feeling I have is also different by Large. I also made Stem Cap a dish of the same color. Just OEM's Rubber cover was almost 0 Gram, this Jeta's Stem Cap was 5 Gram, so Total made it 15 Gram lighter.
The appearance is also noticeable, and because the color is vivid, the Tension goes up. Since the Double-end Wrench does not enter unless you remove the Handlebar itself, it is good to leave the original mark on the Handlebar and remove it. OEM was also quite strongly tightened, so this Zeta Stem Nut was also tightened securely with Double-end Wrench, but the corner was slightly damaged because it was not curing with cloth etc. - - -.
I was disappointed with just one beautiful article - - -. If there is something to be done next time, I will put on cloth and apply force.
Also, when tightening this Zema Stem Nut, it is good to temporarily hold Handlebar and then apply force. Handlebar also got lighter, and I feel that it will be light..
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker X, KAWASAKI KLX125, KAWASAKI KX85, KAWASAKI KX85-II, SUZUKI 250SB, SUZUKI RM85, KAWASAKI KLX110L, KAWASAKI D tracker, HONDA XR50R (for competition), HONDA CRF50F, KAWASAKI KLX150, KAWASAKI KLX250, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX65, KAWASAKI KLX110
RedAnodized to Accent!
I made a similar color with Handlebar and added Accent a little!
When tightening, since Anodized will be bald, I would like protecting material like tightening.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker X, KAWASAKI KLX125, KAWASAKI KX85, KAWASAKI KX85-II, SUZUKI 250SB, SUZUKI RM85, KAWASAKI KLX110L, KAWASAKI D tracker, HONDA XR50R (for competition), HONDA CRF50F, KAWASAKI KLX150, KAWASAKI KLX250, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX65, KAWASAKI KLX110
Easy to install
KLX 250 2006 Formula
When attaching Stem, I did not want Anodized to peel off, so it is difficult to get scratched when you close it with a thin cloth or a SUPER bag.
In my case I closed it with a thin Dustcloth etc..
View detail