Reviews
Great product, great price, easy install
Easy install, took only 15 minutes,went on with no issues. Very good quality and really makes for a much more comfortable ride. Being a 185cm tall rider the 30mm additional height was exactly what I needed for those times I need to be standing up through the rough technical terrain. I would definitely recommend these for taller off road riders.The zeta clamps are exactly what I needed at an affordable price.I can easily recommend these risers.It's worth the money in my opinion. View detail
Riding Position can be easily adjusted.
I bought this to adjust the Riding position of my KLX230R. I had not been particularly concerned about it before, but I became interested in it after reading a blog by an owner who uses it, and when I tried it on, I felt that my standing posture became more natural. I also think that the handlebar is closer to my body, which makes it easier to operate the Axel when I am in full bank at the corner of the motocross course. I do not intend to remove it at present. View detail
Easy Position Adjustment
Installed on KLX230R for position adjustment.
I was not particularly dissatisfied with the position, but when I straddled a friend's KLX with a 30mm up spacer, it felt surprisingly comfortable, so I decided to replace the spacer myself.
First of all, I installed a 19mm up Spacer, and it looks good on its own.
Since only the height is increased, the upper body feels more awake, and the position is just right for standing.
It is easy to install and remove, and may be adjusted according to Course.
No special changes are required for Hose.
View detail
Mounted on SUPER SHERPA
The original purpose was to raise the height of the KL250 Sherpa so that the Choke Lever can be pulled when installing the ZETAAdventureWindshield.
Also, I think the Handlebar has been raised to make positioning easier.
View detail
Used for KLX230 (NORMAL vehicles should be noted)
I bought it because the handlebar position was lower than NORMAL because the front fork was protruding in the LowdownSpec. and standing on a forest road was tiring because the hand was fully extended.
Installation was easily completed in about 20 minutes using Net articles and other resources.
The effect of the 30mm Up is felt, though not dramatically.
The texture is good and I am glad I bought it.
In our case, the nuance is that we have returned the height to NORMAL, which was lowered by the Fork protrusion.
Brakeetc.Cable of KLX230 has a limit length at the NORMAL position, and I think that it is not possible to replace the cable and pimp it out if the cable is upgraded from the NORMAL position.
View detail
Good for posture and appearance adjustment
I am glad to hear that the product was exactly as I had imagined.
I think the 30mm Up has changed my driving posture somewhat.
Since I have a large body, I thought it would look better if the handlebar was a little higher.
View detail
Size is tight
I bought it to lighten the burden on my arms and neck caused by leaning forward. The size is exactly as expected from a manufacturer. There is no tightness or looseness in the attachment part. Unfortunately, there are some cutting marks and scratches on the packaging.
How about using it? Rigidity is fat, the burden on the wrist is fat though it is only 19mm, the appearance is fat, and I would like to raise the handlebar a little more, but I think this is the limit with the OEM handlebar and Cable etc.
View detail
Happy!
I am satisfied with the accuracy, strength, color and Large change. View detail
Off-road driving, standing posture becomes much easier.
The OEM handlebar position required bending at the knees and hips when standing, which was difficult.
[Merit]
Standing posture is easy.
I am no longer tired after standing for a long time because my posture has become easier.
The head position is higher, increasing the amount of information on the visible road surface.
[Demerit]
The length of Accelerator Wire is Limit in OEM.
The OEM length was sufficient for installation, but it is too tight, so we recommend changing to a longer wire.
Clutch Wire was fine at OEM lengths.
View detail
ZETA Zita bar rise kit Item number:ZE53-0230
The product is well made and I am not worried about the installation.
For climbers, there may be a suppression problem because the handlebar is higher.
Installed on a KTM250exctpi.
The Fork can be slightly protruded to lower the height of the vehicle.
For those who want to lower the vehicle height for the time being before installing a lowdown kit that disassembles and installs the suspension.
StandingPosition is comfortable in my opinion for forest roadTouring.
Installation time 10 min.
View detail
Standings and ease of doing
I use it for Enduro play, so I basically ride it in Standing.
The handlebar height was raised by about 30mm because the position was too tight on a trail bike.
I am glad to have replaced the Standing posture as it is much easier and allows me to ride in a posture that is less tiring.
The Clutch Wire and Brake fluidHose had plenty of room, but the Accelerator Wire required some ingenuity.
Limit was sufficient by adjusting the play of the Accelerator Wire in the carburetor.
It would be better to replace it with a longer one if possible, since it would be insufficient depending on the mounting angle.
View detail
Best position
I am 167cm tall and I was happy with the 19Type, which was just right for me. View detail
ZETA Bar Riser is awesome
I purchased this 30mm Zeta Bar Riser Kit for my TW200.Zeta Product Quality is awesome & fit perfectly.when Installing this 30mm riser kit no need to rerout or extended the throttle cable ,brake cable and clutch cable.that is good.I have been riding my bike after installed this riser kit since two weeks.. Advantages of a riser bar kit is lifting my hands to higher position.This takes some weight off my hands in my relaxed/neutral riding position and, combined with the higher position makes it easier to lift the front wheel to get over obstacles.The Higher handle bar means you sit up more and your weight shifts backwards.When Tighten the handle bar bolts first tightened the upper bolts first then the lower bolts.According to the yahama service manual need to tightened the handle bar four bolts to 14ft-lb.My total handle bar height is 125mmThe package arrived very quickly after dispatch from japan.This time I had to pay the customs fees to the Sri Lankan Customs before got my package.Very nicely packed and secure the content with bubble wrap bag.Thanks webike for the High Quality Packaging.I'm very satisfied with the webike service (5Stars).The Great Online shop.The Prices are so cheap and the shipping cost is very low according to the other online shops on the web .WEBIKE SHOP I highly recommended.Cheers!! View detail
It is important to choose a trustworthy brand when it comes to the thing you put between your handlebar. Zeta is one of those brands. installed on my Honda ADV, this raises the handle bar up for 19 mm which is almost perfect. One thing that might not be so satisfied for some bikers is that the product looks simple - not so flashy. I personally like it. View detail
Forest Road Spec. to
I purchased this product to improve StandingPosition.
Standing up and riding is definitely easier now.
I would like to try 30mm once I get used to it.
View detail
Position Improvement
The slightly forward leaning posture was improved by slightly raising the position of the handlebar, and long touring became easier.
I think Standing will also be easier.
The Wire was also easy to work with as it was installed as OEM.
View detail
Improved position flexibility
I also bought this one, which can move to the front or back, to give me more freedom to change the position. View detail
Riding posture is important.
We have short arms and the TRIALHandlebar made us feel a little far away. Also, when standing, the foreground was a little tight, so I bought this. I am very satisfied with the position. I think a comfortable riding posture makes it easier to enjoy riding for a long time without getting tired, and it also makes it safer to maintain my concentration. I suggest that everyone be a little more conscious of their riding posture. View detail
I like the texture.
PRO TAPER SE HON MINI The position was easy, but the bend of the wire/hose was too tight, and I didn't want to get into trouble with the wrecker later on during driving. View detail
To match the Platinum color of PROTAPER
The products are accurate and nicely finished.
Unfortunately, it is easy to scratch, so care should be taken during installation.
View detail