Reviews
vmax 1700 under cowl
it looks beautefull i just recieved it i cant wait to install it . i wish they had some instructions in eghlish hhhlllakkakakakaallaallla;a;a;a;a;a;a;a;a;a;a;;aa;;a;a;a;;a;a;a;a;a;;a;a;a;a;aa;a; View detail
Sioux Four requires modification depending on the year and exhaust system.
(Modification is required depending on the year and Other Brand ProductExhaust System.
I put it on with MORIWAKIOne pieceFull Exhaust System for late NC42.
The first bend of the Exhaust System is a long hole of 6cm in width and 15cm in length, and the half round hole at the exit of the Exhaust System after the first bend of the Under Cowl was cut off by 6mm (It is a half round hole, so it is troublesome if it is cut off. (If you have trouble, you can cut a square at the point where it hits.)
I had the Other Brand ProductSprocket cover on mine, so it was sturdy enough for the large size.
Also, since there is little clearance with the Exhaust System, Heat Insulating Material (about 2000 yen) is required separately.
The engine is also close by, so modification is essential for safety.
Some people say that it rubs on bumps and corners, but since the shape is V-shaped and there is almost no clearance with the exhaust system, the minimum ground clearance is a few millimeters from the exhaust system (I have modified my exhaust system so that it is about 10mm lower than the exhaust system). I have modified the Exhaust System and the Exhaust System is about 10mm from the Under Cowl, so the Exhaust System is lower than the Exhaust System). The ACP one I had before rubbed a lot when I put it on the floor. However, I think it is better to be careful not to put it down too much or to drive over bumps.
If you prefer to use the MotoZoom or ACP products, you may prefer the MotoZoom or ACP products, but if you like to modify and have tools, you may prefer the MotoZoom or ACP products.
Also, since it is a type with a bottom, small stones accumulate inside when running, and it must be removed at least once a month for cleaning.
I chose this Magical because I like the shape, but considering the price of processing and maintenance, the manufacturer's Under Cowl mentioned above is a better recommendation.
The price of the cowl + the price of the Heat Insulating Material + the cost of the gold + the cost of the paint if you do it yourself (free of charge) and the cost of the paint if you paint it yourself… I can't recommend it unless you can afford the gold and you like it….
View detail
cb400sf nc42 last model
I have the Earls GearFull Exhaust System on.
I was able to install it without any interference anywhere. Looks too good to be true.
View detail
Ninja H 2 Under Cowl
I purchased this product for its appearance and am very satisfied with it!
I think the quality of the carbon is good.
View detail
Expensive but Outclassing sense of ownership
[How is it used?
I installed this exhaust pipe on my last model NC42 CB400SF.
The beauty of the exhaust pipe is one of the design features of NAKED cars, but we added the Under Cowl in order to increase the stability of the lower body and the black rate of Black Motorcycle.
Since I don't run on circuits, I don't need to be concerned about the shape of the oil receptacle, but I wanted to try using Magical racing's carbon parts, so I took the plunge, even though they were expensive.
Was the one you received as per Image?
MOTOZOOM I was worried about the OEM Color Painting resin Under Cowl of MotoZoom, but it is 100% dress-up parts because of the wide width and the open lower part. Magical's is a Regulation-compliant product for Circuit driving. Magical's is a Circuit driving Regulation compliant product.
Was the installation difficult?
Simply turn and tighten the Bracket on the Under frame.
The work proceeded with enjoyment of detailed positional adjustments. At least in the case of the OEM exhaust pipe, no modification is required and it is easy to install. For street driving, remove the drain plug and keep it in storage.
How was your experience with it?
The texture is great! It is plain weave CARBON, but very good parenthesis.
[Included Parts:were they on?
The bracket is also made of carbon, with rubber, and can be installed with a simple tool.
[Was there anything that disappointed you?
In order to allow for the various Racing Exhaust Systems, the downward clearance is Large (wide space), and because of this, the ground clearance is low in city driving, so the car may scrape on the bumps of Convenience or GS.
View detail
Under Cowl
We have installed YOSHIMURAmachine bendedFull Exhaust System. I installed it temporarily and found no particular interference, so I painted it and installed it. I was very lucky because I was prepared for the modification. It's nice to have a different atmosphere. View detail
V-max 1700 under cowl(Twill Carbon)
I ordered it on June 25th... I received a reply that the expected delivery date was October, but I received it approximately 5 months later. Unfortunately, the customs clearance process was complicated, resulting in additional costs and additional freight charges. View detail
Premium Quality
High quality belly pan. Arrived with poor paintjob likely due to old stock, had to sent it for spraying, which worked fine as i wanted a custom design anyways. The brackets provided are high quality as well. Do note for Spec III, mainstand can't be used with bellypan installed, need it removed then you're able to use the mainstand. View detail
Under Cowl Impressions
The finish was exactly as I had expected. Installation was easy. View detail
Not bad...
Very expensive but at least good quality. Delivery is fast thought. Happy with the purchase. View detail
If you have changed to an external exhaust system, modification is required.
Cut the parts that interfere with the exhaust system because it is an external exhaust system.
Painted to match the car body.
I think Parenthesis has improved considerably.
View detail
That was a good purchase (Polish) v
Before and after installation, it looks totally different Motorcycle! It looks much cooler now. (*^^^^*) View detail
I feel good
Was the one you received as per Image?
It is not too Large and is on Image.
The black gel was fine, but we wanted a sense of unity, so we painted it to match the color of the car body.
Was the installation difficult?
Installation was easy and did not interfere with the OEM Engine Guard.
It is the last model of NC42, but the Bracket interferes with the Sprocket cover when I try to fix it in a good position, so I replaced it with a Posh Sprocket cover.
The MORIWAKI Short Tube interferes with the Under Cowl, so I had to shave a little off the tube and there is no space on the underside, so I put a heat resistant Felt from Magical racing.
How was your experience with it?
Low, so be careful when cornering with steps.
Although it is unavoidable due to the structure, stones and other debris rolled up by the front wheels accumulate.
[Included Parts:were they on?
I have attached it.
[Was there anything that disappointed you?
nothing in particular
View detail
Magical racing indeed!
Installation was easy, as it was designed specifically for the car model.
(Chain Cover behind Left has been cut a little)
But is it a Normal muffler assumption?
My CB400SB has an external Full Exhaust System, but there is almost no gap between the bottom of the exhaust system and the bottom of the cowl. (Postcard does not go through) AluminumHeat Seat was applied for heat protection.
When I installed it, Parenthesis improved so much that I don't care about that, and I am really Large satisfied.
View detail
Magical racing indeed!
Magical racing indeed!
The part that enters the view is smaller than the products of other manufacturers, but it is made in consideration of the bank angle, and because it is manufactured for each car model, it can be installed avoiding STAND, although it is still in the temporary fixing stage.
One disappointment is that it is based on Normal muffler?
My CB400SB has an external Corresponding Exhaust, but the bottom exhaust pipe assembly is in contact with the bottom of the Under Cowl.
I'm going to put a heat-resistant aluminum sheet on it for the time being, but if that doesn't work, I'll have to cut the parts that are in contact with the Exhaust System. I just pray that the heat-resistant aluminum sheet will fix the problem.
Other than that, I am satisfied with the level, so I would like to enjoy my motorcycle life with CB400SB which has improved parenthesis by wearing Under Cowl.
View detail
Style as I expected
[How is it used?
City driving, Touring, Commuting
Was the one you received as per Image?
Black Gel Coating is more beautiful than I expected.
Was the installation difficult?
The exhaust pipe of AKRAPOVIC and the area of the silencer interfere with each other, so I had to shave them off.
How was your experience with it?
I am satisfied with the ideal style of Large. The Oil Catch Structure is also functional and beautiful.
[Included Parts:were they on?
LargeSticker×2 attached.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
magical RacingUnder Kaoru
I installed it on my cb400sf. I was worried about other Manufacture, but I am glad I went with Magical racing. View detail
Parenthesis is better now.
I installed the Under Cowl to prevent OIL from dripping on the circuit, but I installed the Parenthesis because I like the Parenthesis. I think the OEM Exhaust System is easy to install (the sensor mounting screws on the side stand are coated with anti-loosen agent, so be careful not to lick them). (The sensor mounting screws on the side stand are coated with a non-loosening agent, so be careful not to lick them.) View detail
That's so cool!
[How is it used?
I've wanted an Under Cowl for a long time, and I took the plunge and bought one! I knew it would be inconvenient for my use, but I wanted it anyway, so I didn't care.
Was the one you received as per Image?
As per Image, the packaging was well done and the quality was decent. I was surprised that it took a little over a month to receive the product, although I was originally told that the delivery time would be 4 months.
Was the installation difficult?
I had to do a little work, but I bought it knowing it was not compatible, so if it was, it would be very easy to put on.
How was your experience with it?
Inconvenient!
[Included Parts:were they on?
Included Parts:were all firmly attached!
[Was there anything that disappointed you?
Nothing in particular, Magical racing things are good indeed.
Other items that would be helpful
If you use some Tie Wrap, you can install the Point of Installation or hang 2016 CB400SF. You can do it!
View detail
Under Cowl
I put it on spec3.
I had replaced it with a WR'S Full Exhaust System, but I was able to do it without any modification.
I'm not very good with my hands and it took me about an hour.
View detail