Reviews
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Light Bracket exchange
When I replaced the Blinker, I had to replace the OEM Bracket because it had a hole in it.
The work itself is easy, but the Instruction Manual is not included, so you need to check and replace it by yourself.
When replacing with OEMLight, the Light position is 1cm lower than OEM and 3cm forward
You can't use the Bracket for angle adjustment, so you have to make it yourself or fix it in two places.
Since the space between the Meter and the Light becomes wide, the mounting position of the Meter may be a concern.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Good product
It is not possible to install the separate handle without using the OEM Light Bracket It's not possible, so I decided to replace it
I want to use the type which is held by 4 pipes So I looked at various manufacturers' products, but they were more expensive than I expected
Personally, the finish is secondary to the cost of the product So I bought this one
About the product
It's the same color as the product image "The Color of THE Stainless Steel It's like
Personally, I'm a zero because it gives off an austere vibe
Parts accuracy is not a problem
As for the finish, the Band part is a little Bali?
It's not enough to cut your finger off
The most noticeable Pipe part is not scratched etc
By the way, there is no Instruction Manual
I'm fitting the OEM headlights and I haven't had any problems installing them
Good purchase
View detail
nice parts!!
GOODS Pipe Light Bracket good price.. Attachment was easy and the circumference of Wright felt it refreshed. nice parts! View detail
Easy to install and easy to adjust
I bought this to install clip on hadle bar. Very easy to install. Very easy to adjust height. It was little hard to understand the instruction. View detail
Nice look, nice build
Easy to install, fits well on a Yamaha SR400, can be mounted in 2 ways (long brackets above or underneath) so you can position the headlight low or high depending on the position of your speedo. View detail
Fits: その他 , KAWASAKI W400, KAWASAKI W650, KAWASAKI ESTRELLA, HARLEY-DAVIDSON SPORTSTER Others
With Separate-handle-izing, since Light stays needed to be exchanged, it purchased. Although the high mounted thing was looked for, since a hand was not able to pay a price highly, the thing of a certain famous Manufacturer chose here. It was
With Separate-handle-izing, since Light stays needed to be exchanged, it purchased.
Although the high mounted thing was looked for, since a hand was not able to pay a price highly, the thing of a certain famous Manufacturer chose here.
It was cheap, and since it moreover carried out high mounted one in the product made from a STAINLESS STEEL, appearance was a cinch.
When saying by force, it was worrisome that the Bolt nut of the Clamp of a Fork part fastens certainly, and cannot put.
Since it is being fixed firmly, the light itself does not seem to have a problem, if there is even no slack.
I have in the
Makeover and think that they are deep thing goods.
View detail
Fits: その他 , HONDA CL400, HONDA CB400SS, YAMAHA SR500, YAMAHA SR400, YAMAHA XS400, YAMAHA XS250
Although the high mounted Stay of chuckbox was used temporarily by a certain photography (http://youtu.be/F3 SWFp_eRs0), since it was an object for photography to the last, it changed here. Since the 2. Fork clamp which a 1. fixing position can a
Although the high mounted Stay of chuckbox was used temporarily by a certain photography (http://youtu.be/F3 SWFp_eRs0), since it was an object for photography to the last, it changed here.
Since the
2. Fork clamp which a
1. fixing position can adjust easily is slim, the
advantage.
In a jumble, compared with
1.chuckbox, the bore diameter by the side of a too cheap (it is whether it is reasonably priced)
2. Headlight of the
fault with little admiration was M8, and since its own light was M10, it had to be processed by itself.
(Even if it extends, intensity seems to be OK well)
--
-- if the one where a Stay is longer is incidentally turned up, a light can be attached low.
Conversely, high mounted one is possible if it carries out.
If it says by force, I will want you to improve texture more.
.
.
View detail
Fits: その他 , HONDA CL400, HONDA CB400SS, YAMAHA SR500, YAMAHA SR400, YAMAHA XS400, YAMAHA XS250
It is Mr. GOODS's pipe light stay. Since pure light stay was in SABISABI, the goods here were purchased. It attached to SR400 of 2004 models. Well, it is considerably pleasing individually. Although appearance is also so, since it is a sta
It is Mr. GOODS's pipe light stay.
Since pure light stay was in SABISABI, the goods here were purchased.
It attached to SR400 of 2004 models.
Well, it is considerably pleasing individually.
Although appearance is also so, since it is a stainless raw material, it is strong to rust, and since finishing does not glitter unnaturally, it may be astringent.
Attachment is also very easy.
However, since blinker stay is also one, the pure light stay also needs to prepare blinker stay separately.
Since it is not so expensive well (probably w), let's also buy blinker stay if you like.
笙ェ which is recommended
View detail
Fits: その他 , HONDA CL400, HONDA CB400SS, YAMAHA SR500, YAMAHA SR400, YAMAHA XS400, YAMAHA XS250
Attachment was easy and the circumference of Wright felt it refreshed.
Attachment was easy and the circumference of Wright felt it refreshed. View detail
Fits: その他 , HONDA CL400, HONDA CB400SS, YAMAHA SR500, YAMAHA SR400, YAMAHA XS400, YAMAHA XS250
CB400SS is equipped. Even if this light stay itself did not remove a top bridge, it could equip with it, but the work removed in order to remove the light stay of normal was required. Wright is the touch which comes out before some rather than the
CB400SS is equipped.
Even if this light stay itself did not remove a top bridge, it could equip with it, but the work removed in order to remove the light stay of normal was required.
Wright is the touch which comes out before some rather than the state of normal.
View detail