Reviews
Hmmm...
This is a replacement from OHLINS Grip, but the Fitting is poor.
It can be installed, but it does not feel right.
Is it expensive for the accuracy?
View detail
Fits: YAMAHA VINO, YAMAHA VINO
It's Recommendation because of the quality!
My brother-in-law's Scooter (VINO) Seat was torn, so I reupholstered it for him. The fabric stretches well so it is easy to pull and put up! It is also durable, so it doesn't hurt at all even if I get in and out of the car every day! It's a recommendation because it makes the dirty Seat look like new! View detail
Easy to install
Installation is really easy, taking less than 10 minutes. The texture is good, and the Pipe on the thick body is a nice parenthesis. If I have one complaint, it is that it is not designed to be installed with a helmet holder, even though it is an Endurance Carrier. Other than that, I am satisfied. View detail
It's somewhat within sight.
It would be nice to change the look for those who have been on it for a long time.
I left the installation to the store.
It's an easy dress-up.
Is this what the price is? I think so.
2009 BOLDOR.
View detail
High speed Wind protection
For high speed wind protection, not too large and good texture for OEM. View detail
Wind protection for now
It is inconspicuous and has a good OEM texture, so I put it on for now to protect against wind at high speeds. View detail
Fits: KAWASAKI ZEPHYR400χ
BaGOOSE integrated Fender Eliminator Kit installed
It fits perfectly and is easy to install. It is very good to have a wider cargo space and to be able to load tools, etc.
Clearance of Rear tire and Fender will be somewhat less.
It takes a little care when going over steps.
I'm glad I put it on.
View detail
very good
If you have it in stock,,,, WeBig's delivery time is very good.
If you are in a hurry, go to WeBig?.
Company R and Company a have inventory, but I can't rely on it.
View detail
Somewhat difficult to install
Screws could not pass through and the hole was widened with a 6.5mm Drill for Gold.
Also, USB port and voltmeter are Quantity:The set is great, but you need to cut 5mm off both ends of the middle collar and the bracket to install it on the CRF250 body. The above mentioned work was necessary when assembling the Headlight unit, which is not shown in the YouTube video. The light is very bright and I am satisfied with it.
View detail
Fits: HONDA GORILLA 6V FNo. Z50J-1300017-1805927, HONDA MONKEY 6V FNo. Z50J-1300017-1805927, HONDA Monkey 6V FNo. Z50J-1300017-1805927, HONDA Gorilla 6V FNo. Z50J-1300017-1805927, HONDA Monkey 6V FNo. Z50J-1300017-1805927, HONDA Gorilla 6V FNo. Z50J-1300017-1805927
K-PIT K-Pit Ignition coil
The KITACO Ignition coil is made by K-PIT, so it is easy to install as long as you read the instruction manual carefully. View detail
DAYTONAusb power supply& voltmeter
Since I ride a Motorcycle with Touring as my main vehicle, a voltmeter is very useful for battery management.
The usb power supply is really useful when touring.
DAYTONA products are reliable and satisfactory.
View detail
Rare Other Brand Product for 6v
This is a Horn for 6V electrical equipment, which is now rare.
Since most of the vehicles have been manufactured for a long time, we recommend replacing them with OEM replacements.
View detail
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
Necessary and sufficient performance
The price and performance are sufficient for the need. This is OK for city driving Level. View detail
Fits: HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100, HONDA CRF1100L(Africa Twin), HONDA CBR1000RR SP, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000F, HONDA CBF1000, HONDA CBR1000F, HONDA CBR1000F, HONDA CB750K6, HONDA CB900 HORNET, HONDA CB900F (BOL D'OR), ROYAL ENFIELD BULLET 500EFI, ROYAL ENFIELD ContinentalGT
Best Balance Choice
If you consider the product as a consumable item without overdoing it, you will end up with the best balance. The Chain Cut & Crimp tool is also a beautiful choice. A bit of a geek's touch, isn't it? The silver color is a nice touch. View detail
That's what I'm talking about, Mr. OnoSpeed.
The left hand, which was giving me tendonitis, has also been greatly reduced. The installation was a snap, but you have to make sure you adjust the clutch properly, remove the power assist, and adjust the LongRelease properly. If everything was Yellow Pine, it would be the most blissful experience.
The look is great, and the consistency with the Brembo master is perfect.
View detail
No problem, no problem, no problem
There is no wobble and no problem. View detail
I like the Bearing.
[How is it used?
I was washing my car after Race and it was run out of the house, so I bought it.I could have bought OEM, but I chose this DRC Chain roller, which was in immediate delivery.
The OEM chain roller is just a rubber with a steel spacer, but this one has a bearing, a hard material like DURACON, and a variety of colors, which I recommend. I wonder why OEMs don't have Bearing in their rotary products?
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is not particularly difficult.
How was your experience with it?
It is still a good point that Bearing is firmly attached to both SIDE.
It's nice to be in One Point's colors again.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
None in particular. I'm a Repeat buyer because I know it's quite durable.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Lock nut is a must because it tends to loosen easily~. Also, measure the OEM size before you buy. If you drop it, it is not a good idea to buy it anyway.
Size:L Roller diameter:42mm is here (https://www.webike.net/sd/9398500/)
View detail
Classic color and cool!
I installed it on my JA07SUPER CUB and it looks great with the classic color! And the Yellow Bulb is easy to see even in the rain! I like the durability and the fact that it doesn't break easily! I am very pleased with the durability of the bulb and the fact that it doesn't get damaged easily! View detail
It's the only way
It is a little expensive. But it is good that the Seat bag can be used as a backpack. off running, it is good to be able to carry on your back when you put in-car tools and other things that you don't want to get cracked. View detail
Ideal for fall prevention
The product is good, but WeBig's shipping is good and very good.
Companies A and R are slow to purchase from inventory and are not counted on.
View detail