Reviews
Fits: その他
Headlight with Position
Headlight with Position, only the Headlight was LED, so the Position was changed to LED as well.
The brightness, however, is not uncomfortable.
They also have a diffusion Type. (Prices are a little high) 。
View detail
CBX750FBOLDOR MeterLamp
Installed in place of bulbs and visibility increased. I am not sure about the reduction in power consumption. View detail
CBX750FBOLDOR Indicator light
I installed it in place of a light bulb, and it is clearly visible when lit, probably due to the LED characteristics. I am not sure about the reduction in power consumption. View detail
SUPER CUB
Replaced with NeutralValve in SUPER CUB Meter Driving at night becomes brighter and more enjoyable View detail
SUPER CUB
SUPER CUB Replace with Blinker in Meter Cloudless and Happy Drill and Night Driving View detail
SUPER CUB
Used in the Meter of SUPER CUB. It used to be cloudy, but after I changed it, it became brighter and even with my old eyes, it became easier to see the "HUDDRILL".
exile
View detail
Cling to a black bird. The electric lamp of the meter had burned out, and since it was dark, this was attached. Since he liked red, it was made red. It became a legible and smart meter very much.
Cling to a black bird.
The electric lamp of the meter had burned out, and since it was dark, this was attached.
Since he liked red, it was made red.
It became a legible and smart meter very much.
View detail
Since power dissipation was small, it expected to be connected with derating of a battery and purchased.
Since power dissipation was small, it expected to be connected with derating of a battery and purchased. View detail
[Text completion] It purchases to LED-ization of a number lamp. Although I thought that there was no color also blue, there was nothing also yellow, and you could shine snow-white, light did not become bright only by carrying out [ spread ] Pons attac
[Text completion] It purchases to LED-ization of a number lamp.
Although I thought that there was no color also blue, there was nothing also yellow, and you could shine snow-white, light did not become bright only by carrying out [ spread ] Pons attachment than expected, so that there is no number in a direction of radiation and it expected also by 3LED.
It seems that it is important in order for using for a place which illuminates the direction of a tip of an electric lamp in spot to demonstrate real value since it became bright when the reflector was made and adjusted.
View detail
BANDIT 1250S were equipped. a grip heater and ETC -- since additional electronic autoparts were increasing in number, it aimed at reducing the part whose electric amount of consumption increased. Since it exchanged together with the tail lamp, he
BANDIT 1250S were equipped.
a grip heater and ETC -- since additional electronic autoparts were increasing in number, it aimed at reducing the part whose electric amount of consumption increased.
Since it exchanged together with the tail lamp, he has a feeling in which the circumference of rear one became tight.
Touch whose liking of one the light made into BISHITSU of LED suits.
since a number plate does not necessarily become hard to see, it is satisfactory also in traffic regulation -- it is .
View detail
It's been 6 years and it's working fine.
I wanted to change the Meter Bulb of my CB400SB to LED because it was dark 6 years ago and I found this product. I have been using this product for 6 years since I bought it and it has been working well without any dimming of the brightness. Some people may think that the price per unit is expensive, but I think it is cheap if it can be used semi-permanently. Now I can do most of the maintenance of my motor cycle without leaving it to a motor cycle shop, but it was the first time for me to tinker with my motor cycle when I had no knowledge of anything. View detail
Visibility has been increased and the atmosphere has been improved.
Replacement is four upper and lower Cowl's and Meter's NutQuantity:It was easy to replace by removing the 2pcs.
Red LEDs make the letters stand out and look cool.
View detail
KSR80 IndicatorLamp replacement
It is a KS80 MeterLamp, but the OEM Lamp was not good and the visibility of the Meter at night was very poor and unsatisfactory.
I bought and replaced the LED Position Indicator Lamp that was in the corner of the car at the home center, but although I could see some of the light, it was not satisfactory. It was not satisfactory.
At such a time, when I was browsing through Webig's impressions, I came to the conclusion that M&H Mats Stripe's ultra-brightness LED was good, so I decided to purchase it this time. In the product description, it says to use the same color LED as the meter, so I chose the same Red color as the KSR color.
When I replaced the panel, the red color made the panel look suspicious, but I felt that the visibility was improved.
In order to make this comparison, I covered the camera with a black cloth during the daytime, so it may look a little different at night, so please refer to other people's impressions.
View detail
Bright.
LargeSatisfied. But it may be too bright depending on where it is used. View detail
Brighter than you can imagine
[How is it used?
Used as Indicator sphere for OEMMeter
Was the one you received as per Image?
When I turned it on, it was much brighter than I imagined.
Was the installation difficult?
Not difficult, but the access to the Meter Bulb is quite large and strange.
How was your experience with it?
Good visibility … even in daylight, but glaring at night! (especially Blue)
After all, from the top of Lamp. [Color] Coping by applying Smoke
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Too bright … But I think this is a mistake of my own choice since it is for Indicator use.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
LEDs are polarized, so once installed, check the lights before reassembling! If it does not turn on, just plug it in the other way and it should be OK.
View detail
As a positional lamp
I use it as a position lamp. I used to use the bare LED ones made in China, but I felt that the M&Komatsu Stripe LEDBeams have a clear cover and are highly water proof. It has been a year since I started using it, but it has never flickered or failed to light up, etc. Since I bought the L700, it is very bright with the Spot, and I changed the Headlight to LED, so it is not noticeable yet, but if it is a Halogen bulb, it may be more noticeable than the Headlight. I regret that the 700FSeries is better for the position lamp. It is my own fault that I stopped looking well. View detail
Wide area with no irregularity
I've been using inexpensive overseas LED products for Speedometer lighting on vehicles in the late 90s But
Even if it is a diffuse type for meters, the intensity of illumination is uneven, and the dial of the panel is not visible comfortably
Spotlight irradiation looked like a faded meter panel
In fact, the car is old and I thought the meter panel had faded due to sunburn, so the sun was not particularly bright There was a Stress to driving after dark
When we replaced it with Matsu Stripe products, the metered lighting was very even
The color of the panel came out beautifully, so I can Refresh the panel and drive the car with a good feeling I can now drive with a good feeling
These Parts do not improve the performance of the Engine, but they do make the
I think it would be an improvement in feeling good about driving
This may result in extending the life of the Battery of the permanently lit vehicle
View detail
In Tail
I bought it by mistake as Double Bulb
Although I used it for other parts inevitably
The brightness does not change with the Halogen sphere, not to mention the voltage
It is not bad and it can be used normally.
View detail
by mistake
I bought it wrongly as Double Bulb
Since I could not use it, I used it for other parts
Brightness is the same with OEMHalogen and it does not change
Needless to say voltage.
View detail
It is good!
SUPER CUB 50 in Restore (C50) Because the Meter valve has been cleared, I tried to purchase this Valve as a power saving now. Regarding the feeling of use, it is unknown how much the difference in brightness is because OEMValve has already been cleared at the time of purchasing a vehicle, but there is no problem with running at night. As far as I know about this type of LED Bulb I have not manufactured anything other than M & H pine Stripe, so I thought that it is a precious existence?. View detail