Reviews
Co-tightened to Left SideMirror!
I have been making my own bracket for my Digital meter, but this time I bought a ready-made bracket, which is stronger and of higher quality than the one I made myself. It is better to buy it than to go through the trouble of making it myself. View detail
Universal meter mounting bracket - using it for Yoshimura Progress-2 multimeter
Simple but very practical meter holder. I'm going to use this for the Yoshimura Multimeter Pro-gress2. got the left side to install on the left handlebar. since the yoshimura meter is black, i have also chosen the black colour mounting bracket. View detail
I added a Switch and a voltmeter for the drivetrain.
I bought this product because I didn't have a place to mount the Switch and voltmeter for the DRA RECO.
I am personally satisfied.
However, there is some BALI and it would be nice if the finishing could be carefully done.
View detail
Digital meter installation
I bought this to attach to the 6mm Screw that attaches to Top Bridge's Fluid Tank.
The product has a 10mm hole, so I first converted it from 10mm to 8mm, and then used Spacer to convert it from 8mm to 6mm.
Spacer is a
KITACO 0900-093-09008 and 0900-093-09006
Rubber Washer by Posh face
Inner diameter 10mm, outer diameter 22mm, thickness 1mm
Press-fit using (ok in Pliers)
After installation, the angle is tight, so use hand power to bend it to the desired angle.
for Right Side is installed inside out.
Top Bridge is FZr1000 3GM Inverted Type
View detail
SizeExactly, strength is also good
I bought this for fixing Lap timer for ez-lap.
It was SizeExactly and the thickness of the board is enough to ensure its strength.
View detail
KOSO:I purchased this product to install Koso Pro1Multimeter.
Even when pressing the Button on the Meter, the force does not escape, it is firm. View detail
Fits perfectly with DAYTONA's AquaPRO louvers.
As you can see, the Size is perfect with the same Manufacturer.
I used it in the middle with the Handlebar co-tightening collar in between.
It was at an angle, so I tapped it and corrected it flat.
View detail
Bracket Offset amount is short
DAYTONA DAYTONA : Used for mounting AQUAPROVA HG Thermometer
Bracket is close to Mirror 's foot, and it is impossible to put all of Temp meter' s body.
Sorry though it is from Manufacturer
View detail
DAYTONADAYTONA Digital Meter Mounting Bracket
Size is precious because it is a bracket for this Meter for a treasure. As other people have written, as BALI seems to be quite terribly bad, as it is likely to cut off your fingers or something else, I just scratched it with rasping just in case.
There are no particular problems as angles etc are bent slightly if they are pushed with fingers.
View detail
It is a set article.
It is purchased to attach the company's template.
Size is also exactly because it is a special item.
As a Bracket to turn on other Meters
I think that diversion will be effective.
To this Extra Upper Crampetc. In combination
Navigation and Radaretc. Also attached cleanly.
View detail
I failed for a while
I bought it for Meter installation at the same time, but since it interferes with MASTER, it can not be attached to Mirror as it is, I purchased additional Universal Clamp and attached it to the installation. In mail order, I do not quite know that ... but even if I saw it at a store, I might not notice it. Well, it is not bad because it is Firmly fixed thanks to this.
In order not to fail like myself, we recommend that you firmly think about the installation Image before purchasing. It is fun to play textures too, but ~
View detail
Thinking about installation Kindly surrounding Parts
Simultaneous purchase for installation of High-gradeTemp meter made by the company.
Of course the construction is good.
I thought about making your own but I bought it for around 1000 yen so I bought it correctly.
Just pinch it with Mirror mounting Screw.
Quantity : Pair (for Left and Right) It is an order attention so as not to mistake only.
View detail
It is cool in SuperCUBOEMShield
I bought it for installing Digital tachometer.
I wanted to install an AnalogTachometer, but since this was a Meter Bracket that this Bracket seems to be able to successfully fit in SuperCUBOEMShield, I decided to install a digital tachometer.
It is also called Exclusive Bracket of Digital tachometer purchased, Size also Exactly. The angle was just right.. It is a solid Bracket.
View detail
I purchased it with Set
DAYTONA I purchased with AQUAPROVA HG Thermometer and Set but since Mirror and Meter interfere with each other and made Separate handle, a little processing was necessary for installation.
I think that it is good if the price is cheap and NORMAL.
View detail
There are many BALI
I bought it for installing the water temperature sensor of the same Manufacturer.
Because of Exclusive Design Size is perfect for installation.
Quantity : Pair (for Left and Right) It is good that the target product is sold.
But the finish is rough or BALI is pretty, so be careful. Since painting will be peeled when you scrape BALI, I want you to handle BALI properly before painting.
The price is also a bit expensive, I think whether it can be cheaper if made this way.
View detail
I bought this product when I purchased a DAYTONA Temperature Meter.I would have made it myself, but thinking of buying an aluminum plate of 3mm thick and molding itcIt made me think that it wouldn't be such a loss if I could buy one at th
I bought this product when I purchased a DAYTONA Temperature Meter.
I would have made it myself, but thinking of buying an aluminum plate of 3mm thick and molding itc
It made me think that it wouldn't be such a loss if I could buy one at this price.
I jointly tightened it with the mirror.
The angle was excellent, even better than I had expected.
You will waste a lot of time and trouble if you do it yourself. So I think this will do good if you are OK with ones without color.
View detail
I purchase in order to attach a Tachometer to CD125 -- again .The same thing also as the MONKEY is attached.Although the color and quality are satisfied enough, I think if there is a thing of not only a 10-mm hole but an 8-mm hole.It is likely to
I purchase in order to attach a Tachometer to CD125 -- again .The same thing also as the
MONKEY is attached.Although the
color and quality are satisfied enough, I think if there is a thing of not only a 10-mm hole but an 8-mm hole.It is likely to shake, although well attached also to an 8-mm MONKEY satisfactorily.
View detail
Aqua prober It purchased for attachment of a Digital temp meter.It attached to the Stay of a right Mirror.Although it was satisfactory and the angle was also right just, the BALI remained the end rim neighborhood on the back, and when attaching whether
Aqua prober It purchased for attachment of a Digital temp meter.It attached to the Stay of a right Mirror.Although it was satisfactory and the angle was also right just, the BALI remained the end rim neighborhood on the back, and when attaching whether other parts are damaged, the stripes of the attachment (fixation) were carried out nervously.
It expects to be improved.
View detail
Although it is simple form, it is made required and sufficient function is filled.It is likable at the place which is not ornamented too much. The Edge of the SIDE merely stands [ which it has started ] like [ although fundamental paint applicati
Although it is simple form, it is made required and sufficient function is filled.It is likable at the place which is not ornamented too much.
The Edge of the SIDE merely stands [ which it has started ] like [ although fundamental paint application and the structure itself are very good ], and when it is attachment, a crack is likely to be attached to other parts and it is anxious about them.I think that considering the price it is not a problem in particular.
View detail
It is attachment at the right Mirror. The field of view is also a cinch!
It is attachment at the right Mirror.
The
field of view is also a cinch!
View detail