Reviews
Fits: YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250), YAMAHA YZF750SP, YAMAHA DRAGSTAR250, YAMAHA XJR400R, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA V-MAX 1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400
For installation of YOSHIMURA Temp Sensor
Purchased for Sensor installation on YOSHIMURAProgress2.
YOSHIMURA also offers this product, but for some reason it is out of stock.
To remove the Motorcycle side, simply remove the sealing bolt and replace it with this one.
Since most of YOSHIMURAOEM's sensors are reddish anodized, this product, which is made of brass, is not so harsh, which is more convenient.
I really wanted to take it out from the side because taking it out from the drain bolt part would not allow the socket to be used, or it would be quenched by the rain on the road surface and would not give accurate readings.
View detail
Fits: YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250), YAMAHA YZF750SP, YAMAHA DRAGSTAR250, YAMAHA XJR400R, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA V-MAX 1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400
Camshaft Chain Tensioner to oil temperature extraction
The oil temperature is taken out of the CUB, but I think the following two locations are common.
OEMSensor interrupt (display higher due to Head temperature)
Oil drain bolt (a hassle when changing oil)
The former has a limited Oil Temperature Meter (Harness), and the latter requires the Sensor to be detached when replacing Oil...
and I was about to give up....as it did not meet my requirements, but then I saw on YouTube that it fits CamTensioner Bolt
We found the description and selected this one.
The amount of oil to the CamTensioner is very small, so if you ask me if it is an accurate oil temperature, it may be subtle.
Still, there is no discomfort in the movement during driving, so it is useful as a guide for Large ordinary.
View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI Z750FXII/III, KAWASAKI Z750GP, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPz400F/F2, KAWASAKI GPz400F/F2, KAWASAKI GPZ1100, KAWASAKI GPz400F/F2, KAWASAKI GPZ1000RX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400
Gasket washers are...
There is no stock of this Drain Washer with 18mm inner diameter, 25mm outer diameter, and 2.0mm thickness, and all 5 nearby motorcycle supply stores were completely wiped out.
AutoBacks, as I recall, were not in the store, so I asked them and they brought me one from Bit's with an 18mm inner diameter, 25mm outer diameter and 1.5mm thickness! ( ^ω^ )
AutoBacks indeed!
View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI Z750FXII/III, KAWASAKI Z750GP, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPz400F/F2, KAWASAKI GPz400F/F2, KAWASAKI GPZ1100, KAWASAKI GPz400F/F2, KAWASAKI GPZ1000RX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400
Gasket washers are available at 、、、、、
Gasket washer, with an inner diameter of 18mm, outer diameter of 25mm, and thickness of 2mm
Inventory wiped out at 6 nearby supply stores?
AutoBacks as I recall, there was no Washer itself in the store, so I asked and Pit brought me one with an inner diameter of 18mm, outer diameter of 25mm and thickness of 1.5mm ^_^.
AutoBacks indeed?
When replacing the oil, it might be better to remove only the Temperature Sensor.
View detail
Fits: YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250), YAMAHA YZF750SP, YAMAHA DRAGSTAR250, YAMAHA XJR400R, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA V-MAX 1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400
Sensor removal formula is nice
Replace from YOSHIMURATemp meter. Because YOSHIMURA's Sensor integrated type, Torque wrench could not be used, but this product is useful as it can also be removed. Even if it is a defective Sensor, it will be a minimum replacement. View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI Z750FXII/III, KAWASAKI Z750GP, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPz400F/F2, KAWASAKI GPz400F/F2, KAWASAKI GPZ1100, KAWASAKI GPz400F/F2, KAWASAKI GPZ1000RX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400
This product
Personally I think that it may be cheaper
Body buying and Fitting will be a part that must be bought absolutely because it will be a part that can be sold at a high price this time DAYTONA, but each Manufacturer thinks such a feeling is only yourself?
View detail
Fits: YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250), YAMAHA YZF750SP, YAMAHA DRAGSTAR250, YAMAHA XJR400R, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA V-MAX 1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400
Installed the fitting in September 2015 and it has worked great until a few days ago. I noticed a little oil leaking around the fitting. I torqued the fitting to 31ft lbs and it snapped off. Please see picture. I wish the fitting was made of steel and not
Installed the fitting in September 2015 and it has worked great until a few days ago. I noticed a little oil leaking around the fitting. I torqued the fitting to 31ft lbs and it snapped off. Please see picture. I wish the fitting was made of steel and not brass. View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI Z750FXII/III, KAWASAKI Z750GP, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPz400F/F2, KAWASAKI GPz400F/F2, KAWASAKI GPZ1100, KAWASAKI GPz400F/F2, KAWASAKI GPZ1000RX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400
I bought it with Set
DAYTONA I bought it with AQUAPROVA HG Thermometer and Bracket and Set.
It was a special item so I could install it with confidence.
View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI Z750FXII/III, KAWASAKI Z750GP, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPz400F/F2, KAWASAKI GPz400F/F2, KAWASAKI GPZ1100, KAWASAKI GPz400F/F2, KAWASAKI GPZ1000RX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400
A Cost performance also thinks that it is good and the place where the Lineup of various objects for vehicle types is carried out is charm. Although the Washer is attached, it is thought that it was good to have wound Coking Tape ? around the thread p
A Cost performance also thinks that it is good and the place where the Lineup of various objects for vehicle types is carried out is charm.
Although the
Washer is attached, it is thought that it was good to have wound Coking Tape ? around the thread part in addition.
(Since the Tape was wound around the Sensor)
View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI Z750FXII/III, KAWASAKI Z750GP, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPz400F/F2, KAWASAKI GPz400F/F2, KAWASAKI GPZ1100, KAWASAKI GPz400F/F2, KAWASAKI GPZ1000RX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400
DAYTONA DAYTONA AQUAPROVA [Aqua prober] HG TEMP METER is purchased to the Tameichi clue to attachment. It is whether it is all right to purchase, since [ both ] it is not a thing which can be processed and made, either.
DAYTONA DAYTONA AQUAPROVA [Aqua prober] HG TEMP METER
is purchased to the Tameichi clue to attachment.
It is whether it is all right to purchase, since [ both ] it is not a thing which can be processed and made, either.
View detail
Fits: YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250), YAMAHA YZF750SP, YAMAHA DRAGSTAR250, YAMAHA XJR400R, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA V-MAX 1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400
Since the Fitting of each Size is assembled, they are goods with high flexibility. The Sensor is changed in size with one kind and a Fitting! For the User, it is kind setting out!
Since the Fitting of each Size is assembled, they are goods with high flexibility.
The
Sensor is changed in size with one kind and a Fitting! For the
User, it is kind setting out!
View detail