Reviews
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I went with Gold...
I bought it to go with the rear stand, but I think it would be fine with other Manufactures.
The color jumps with age when exposed to the sun, I think the same for the others.
If so, I'm glad it was inexpensive.
View detail
Fits: KAWASAKI BALIUSI, KAWASAKI ZEPHYR400 χ, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI , KAWASAKI XANTHUS, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZRX400
For future maintenance
Purchased in anticipation of future maintenance using the Maintenance Stand.
Installation is as simple as tightening the bolt.
View detail
Fits: KAWASAKI Z1000, KAWASAKI Ninja400, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-12, KAWASAKI ZX-10R, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja650, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI , KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI Z250
Perfect even if not on the conforming List.
The conformity is
BALIUS2、ZrX1200S、NINJA 250 ABS、ZX-6R、ZX-6RR
Ninja250SL is not mentioned.
Just tear the packet and Bolt On and it is perfect.
Now you can do a V-shaped Lift!
A must for self-maintenance of the undercarriage!
So, I have been using it for a long time, and as expected, Anodized is fading.
But, well, Wound is also something that comes in when it is received by Hook and can be applied by Mame in the future.
Large thing is that it will hold Firmly, so
No problems at all!
View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI ZX6R, KAWASAKI Z800, KAWASAKI Z1000
2018 Ninja 650s should take note!
The JT-107D is applicable to the 2018 Ninja 650.
Note that Webike's List is wrong!
The Manufacturer QR code was also unreliable because the information was out of date.
Thank you to those who alerted us with their impresarios.
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI ninja, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
It combines practicality and good looks.
It is practical yet stylish on the feet. View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Used on GSX-R1000 K5
I bought this for cleaning around the rear area and chose the one made by J-trip because I had used it on my GSX-R125. I was a little nervous when I had to lift a 1000cc bike, but once it was up, it was stable and secure. View detail
Fits: KAWASAKI Z1000, KAWASAKI ER-6f, KAWASAKI Z250, KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja650, KAWASAKI BALIUSII, KAWASAKI ZSeries, KAWASAKI ZZ-R1400, KAWASAKI ZX-9R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja400
J-TRIP
It is the only cheap J-TRIP where everything is sold separately.
This makes it very easy to raise Motorcycle.
View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I am satisfied
I installed this product on my YZF-R46. I am satisfied with the quality of the product and I own J-TRIP's MaintenanceSTAND. View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI ninja, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Mounted on Z400
[How is it used?
Installation for Maintenance.
Z400 (Current Ninja 250, 400) If you are using a Swing Arm to receive a Hook, it is better to use a Hook, as it may interfere with the Winging.
Was the one you received as per Image?
It was Red Anodized, but I think it would have been better if it was a darker color.
Was the installation difficult?
Very easy to install, if you have the right size hex wrench and are willing to use STAND to raise the rear, you will have no problem.
Medium strength screw lock agent (Locktite, THREEBOND, GACHI Screw, etc. anaerobic adhesives) can be used together to reduce the possibility of Screw loosening due to vibration.
How was your experience with it?
As it is a dedicated product, it works well with JTrip's STAND in a large way.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Anodized coloration (Red)
What you need to prepare when you install it.
Medium strength screw lock agent
Removable medium-strength is recommended, as it will need to be removed when the anodized color fades.
View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ninja, KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, HONDA , DUCATI Late 999, DUCATI 749, BMW S1000RR, BMW S1000R
Used on GSX-R125
Installation is easy with the included bolt.
Unfortunately, when I lifted up on the STAND, the black color on the surface of the STAND contact area peeled off in one shot.
I don't mind that it's scratchy, but I probably should have gone with Silver.
View detail
Fits: YAMAHA , APRILIA RSV1000 Series, TRIUMPH DAYTONA675, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RS125, APRILIA RS250, APRILIA SL750
Overwhelming name recognition and trust. And availability.
[How is it used?
I've been riding a YZF-R25 and a YZF-R6 for about 6 years, and I've done about 80,000 km of maintenance around the chain.
Was the one you received as per Image?
Image Street as it is in the package that you can always find at a motorcycle supply store.
Was the installation difficult?
Hexagonal Wrench to stop with a single boltQuantity:Pair (for Left and Right) A pair together takes only a few minutes.
Even with the process of applying Bolt loosener to keep it on, it ends up being an admiration.
How was your experience with it?
STAND is also the same manufacturer, so you can feel confident that your motorcycle is in good hands.
It is good to see that the motorcycle shops were also using a combination of J-TRIP's STAND and genuine products, which together with the large number of stores handling them, gives a sense of security against the risk of damaging motorcycles.
After raising it, it is stable even if you remove the Wheel or wipe it with a cloth.
It will get a few scratches and dents as you use it, but you can always buy a new one at a motorcycle supply store.
[Included Parts:were they on?
Tools and anti-loosening devices need to be prepared separately.
[Was there anything that disappointed you?
None in particular
It's also less expensive than Y's Gear and other manufacturers, and if you don't mind the shiny LusterLuster look, it's probably the first product you'll pick up.
When I left it on and crashed, the Bolt broke from the attached value when I slid down the road on R25. However, I think I had replaced the bolt with a sus, so it might not have broken if it was the original bolt of this product.
View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
In use on YZF-R6 '08
YZF-R6 '08 has M6 Bolt hole, so you can use this product. The original product comes with SilverWasher and SilverBolt, but we changed the bolt to Titaniumium color Stainless boltM6×35, and the Washer inside is also changed to POSH M8Stainless black The Washer that goes inside is also replaced with POSH M8Stainless black Washer. Of course, there is no problem to use it over Racing Stand. If I say it strongly, Wound will be attached when I use Racing Stand, but I think I will change it to a new one when I use it to some extent. View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
It also makes a good Accent.
I chose Gold to match the color of the Outer tube of the Front fork, and I am satisfied with the good Accent.
The size is larger than I expected and it has a strong presence.
View detail
Fits: YAMAHA , DUCATI MONSTER S2821, TRIUMPH DAYTONA675, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA SL750, APRILIA RS125, APRILIA RS250, YAMAHA , TRIUMPH Daytona 675, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750, DUCATI Panigale 899, DUCATI Monster 821, APRILIA RS125, APRILIA RS250, APRILIA RSV1000 Series, APRILIA SL750
Easy install
Works great with JTrip Stand View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Parts required for Rear Lift up
outline
Hook bolt for Maintenance Stand.
Reason for purchase
I decided to buy a J-trip Rear Maintenance Stand, so I decided to buy a Hook bolt that is compatible with the Rear Maintenance Stand also made by J-trip. If you use J-trip's Hook bolt, you need to be careful because the shape of the Hook bolt may not match with other company's one.
In addition, because I have seen the comment that the color falls by the wear etc. though there are various colors in Lineup, I decided on Silver color which seems not to worry about the color fading because the material is Aluminum.
Appearance etc.
HookQuantity:2pc. Set, ColorQuantity:2pc. Set, BoltM8×35 is Quantity:Comes with 2pc.
Cut-out of Aluminum2014 material.
Mounting method
The model number of the compatible Hook bolt is different depending on the type of car, etc., so we recommend you to check the official website to choose the right one. JT-107D-SL which I bought this time is compatible with ZX-10R (2021) I was able to install it on the
The STAND used is JT-125, and the receiving Bracket is a combination of V-type JT-107V1.
Please note that this product cannot be used on motorcycles that do not have a mounting hole in the Swing Arm of the motorcycle.
It is very easy to install, just put the collar in the hole of the Hook and attach it to the mounting hole of the MotorcycleBody with Bolt. You may lubricate the collar with Grease etc. I sprayed the collar with silicon spray. I think it is standard torque because there was no description of the installation torque etc. I tightened it by hand and tightened it with a tool at the end so as not to tighten too much.
Impression used
When I first shifted up, the hook receiver was a little out of the groove on the hook side, so after I shifted down, I adjusted the position of the hook receiver side to fit the hook groove and was able to use it safely.
Improvements
There are no particular problems.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Z1000, KAWASAKI ZRX1200, KAWASAKI ZX-10R, KAWASAKI ZX-12, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI Z250, KAWASAKI ZSeries, KAWASAKI BALIUSII, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI Ninja650, KAWASAKI ZRX1100, KAWASAKI Ninja1000, KAWASAKI ER4, KAWASAKI ER-6n
Required for Maintenance
Of course, if you use a V-shaped receptacle, you'll get scratches on the skin.
Anodized will be peeled off If you are worried about it, you should buy Silver.
View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI ninja, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Just right for the look Accent!
It's just perfect for PetitCustom. View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, TRIUMPH DAYTONA675, SUZUKI , KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ninja, KAWASAKI ZX6R, KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, HONDA , DUCATI Late 999, DUCATI 749, BMW S1000RR, BMW S1000R
It's good for a little Accent.
Not only does it look Accent, but it also works well with JTrip's STAND and feels great to use. View detail
Fits: KAWASAKI Z1000, KAWASAKI Ninja400, KAWASAKI ZX-14, KAWASAKI ZX-6R, KAWASAKI ZX-12, KAWASAKI ZX-10R, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI Ninja650, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja300, KAWASAKI , KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI Z250
Processing is Beauty
I bought this product to use with Maintenance Stand, Anodized will be peeled off when I use Maintenance Stand, but this is not a problem. I am very satisfied with the finish. But the color is resin. View detail
Fits: KAWASAKI Z1000, KAWASAKI Ninja400, KAWASAKI , KAWASAKI Z250, KAWASAKI ZX-6R, KAWASAKI ZX-6RR, KAWASAKI ZX-9R, KAWASAKI ZZ-R1400, KAWASAKI ZX-14, KAWASAKI ZX-10R, KAWASAKI ZX-12, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI Ninja300, KAWASAKI Ninja650, KAWASAKI Ninja250, KAWASAKI ER-6n, KAWASAKI ER4, KAWASAKI Ninja1000, KAWASAKI ZSeries
Always buy Repeat
I always buy Repeat.
This is a must for Maintenance.
I've used it and it seems to be strong enough.
Honda and SEA BASS share the same screw thickness, but only Kawasaki models are different.
View detail