Reviews
Easy to charge
Purchased an additional Motorcycle.
It is convenient to keep Charger connected during the non-riding winter months!
Charger does well these days, just plug it in and it's good to go!
View detail
You can connect and charge Battery with One-touch
I have posted before (https://imp.webike.net/article/0419666/) about the product that is the subject of the impregnation, but when I posted the impregnation Type of vehicle used (installed) column now appears, I'm reposting the Impreza with the vehicle type used set.
What made you decide to buy?
(I didn't buy the product (it came with the Battery Charger, which I will discuss later)
How was your experience with it?
It's a very convenient product because you can connect and charge the Battery with One-touch (TwoTouch if you include removing the dustproof Cap?) (Quantity):(See 1pc. eye post pics)!
In addition, the company's USB power supply (https://www.webike.net /sd/21440311/), but the Honda Sub harness ( (https://imp.webike.net/article/0363139/) and connected to the ACC power supply
You can also connect directly to Battery by using the in-play products (2nd post) (See photo)
By doing this, you don't have to turn on the main switch in an emergency It can be used to charge a cell phone from a motorcycle, for example
Was the installation difficult?
If access to the battery is not difficult (like Seat and If you don't remove the cover etc.), you can use the existing Power Cord on the Battery terminal It is easy to install, since all you have to do is to tighten it together with the
For the 400X, the installation was easy as you can easily Access the Battery by removing the Seat using the key (see the third posted photo).
【Please tell me the installation point and hang】
When not charging, the connection Coupler is pushed into the gap of the Seat frame (Quantity:1 Set of 4pcs. (See the photo posted in the eye)
However, the Coupler comes with a Cap, but you can find it on the company's website (https://www. daytona.co.uk/products/single-71637-genre) if you look at it In fact, put it in a place where it won't get rained on (Perhaps that's why the product name is "With a waterproof cap not "With a dust cap In case of rainy weather, the Connection Cord is stored under Seat
[Was there anything that disappointed you?
Temperature is lowMaterial:When the Rubber's Dustproof Cap is hardened, it can be difficult to remove the Cap from/attach it to the Connection Coupler.
In that case, I remove and install the Dustproof Cap while inserting the Slotted screwdriver.
[Was the Instruction Manual easy to understand?
(Omitted since I didn't buy the product.)
[Included Parts:were they on?
(Omitted since I didn't buy the product.)
Do you have any wishes or improvements you would like to make for the Manufacturer?
I would like to see the dust cap on the connection Coupler improved so that it can be easily removed and attached even when the temperature is low.
I also hope that the price will be lower than the following USB power supply
[Do you have any products to compare it to?
・DAYTONA：Motorcycle Power Supply USB 1Pot
(https://www.webike.net/sd/22060420/)
The Connection Coupler used in this product is the same as the one used in the product in question It is the same shape as the Connection Coupler
Because the price is cheaper here, if there is a use of the USB terminal side, I think that it is good to buy here.
DAYTONA：Display Battery ChargerRepair item Body Connection Harness
(https://www.webike.net/sd/22060427/)
The connection coupler used in this product is the company's "Display Battery Charger Other than (https://www.webike.net/sd/21922914/) Charger and USB power supply (https://www.webike. net/brand/177/series/21942/), the connection used in Note that the shape of the coupler is different from that of the coupler and cannot be connected to them
[Others]
The company's "SwitchingBattery charger 12V (https://imp.webike.net/article/0419564/) It comes with 1pc. of in-play items as Included Parts:
If you own more than one Motorcycle, it would be a good idea to purchase the amount you need.
View detail
SecondMotorcycle for charging…
I purchased this product for my new car. Because it is possible to charge easily only by the Coupler connection if this is put on, it is convenient for the battery performance maintenance and management especially in winter. However, because there are the same Repair Parts in others, please only confirm whether it fits the Charger you have enough. If it is a little cheaper, it is 5 stars. View detail
One-touch allows you to connect to the Battery for charging!
What made you decide to buy?
(I didn't buy the product (it came with the Battery Charger, which I will discuss later)
How was your experience with it?
As described in Charger's Instruction Manual, which is discussed below One-touch (Two-Touch, if you include the task of removing the dustproof Cap? It is a very convenient product as it can be connected to Battery for charging (Quantity:(See 1pc. eye post pics)!
In addition, the company's USB power supply (https://www.webike.net /sd/21440311/), but the Honda Sub harness ( (https://imp.webike.net/article/0363139/) and connected to the ACC power supply
You can also connect directly to Battery by using the in-play products (2nd post) (See photo)
By doing this, you don't have to turn on the main switch in an emergency It can be used to charge a cell phone from a motorcycle, for example
Was the installation difficult?
If access to the battery is not difficult (like Seat and If you don't remove the cover etc.), you can use the existing Power Cord on the Battery terminal It is easy to install, since all you have to do is to tighten it together with the
In the case of the 400X, you can easily access the Battery by removing the Seat using a key So installation was easy (see the third photo in the post)
【Please tell me the installation point and hang】
When not charging, the coupler is pushed into the seat frame gap (see Quantity:1 Set of 4pcs. (See the photo posted in the eye)
However, the Coupler comes with a Cap, but you can find it on the company's website (https://www. daytona.co.uk/products/single-71637-genre) if you look at it In fact, put it in a place where it won't get rained on (Perhaps that's why the product name is "With a waterproof cap not "With a dust cap In case of rainy weather, the Connection Cord is stored under Seat
[Was there anything that disappointed you?
I'm having trouble disconnecting the Dust Cap from the Connection Coupler/installing it in the Connection Coupler
While inserting the slotted screwdriver, the dustproof cap is attached and removed
[Was the Instruction Manual easy to understand?
(Omitted since I didn't buy the product.)
[Included Parts:were they on?
(Omitted since I didn't buy the product.)
Do you have any wishes or improvements you would like to make for the Manufacturer?
I would like to improve the dustproof cap of the Coupler so that it can be easily attached and removed
I also hope that the price will be lower than the following USB power supply
[Do you have any products to compare it to?
・DAYTONA：Motorcycle Power Supply USB 1Pot
(https://www.webike.net/sd/22060420/)
The Connection Coupler used in this product is the same as the one used in the product in question It is the same shape as the Connection Coupler
The price is cheaper here, so if you have a use for the USB terminal side, you can buy this one I think (see the fifth photo in the post)
DAYTONA：Display Battery ChargerRepair item Body Connection Harness
(https://www.webike.net/sd/22060427/)
The connection coupler used in this product is the company's "Display Battery Charger Other than (https://www.webike.net/sd/21922914/) Charger and USB power supply (https://www.webike. net/brand/177/series/21942/), the connection used in Note that the shape of the coupler is different from that of the coupler and cannot be connected to them
[Others]
The company's "SwitchingBattery charger 12V (https://imp.webike.net/article/0419564/) It comes with 1pc. of in-play items as Included Parts:
If you own more than one Motorcycle, I thought it would be a good idea to buy enough to meet your needs It is
* The 19th Impression Con test (https://www.webike.net/campaign/20191001_) impression_contest/) I'm writing an impresario
View detail
Partial purchase due to increase in volume
Purchase Float formula Charger of the same Manufacturer previously for NC 700X, buy only Cable of car Both Sides for CBR 400R with this time increase. Although it is a good Charger that can be connected, it is not to run two cars at the same time, so it is said to be charged alternately. You can save the trouble of removing the whole from the Battery side.
View detail
[Webike Monitor] Although it was attached to one charger body, since there were two or more Motorcycles, car-body wiring was purchased by the addition. More than one are owned, and also since midsummer midwinter seldom rode, it was purchased for
[Webike Monitor] Although it was attached to one
charger body, since there were two or more Motorcycles, car-body wiring was purchased by the addition.
More than one are owned, and also since midsummer midwinter seldom rode, it was purchased for Battery management.
wearing is also easy, and since the necessity of completely removing a Cowl at the time of charge is lost, it is dramatically convenient!!
View detail
It purchases simultaneously with the battery charger 71199 made from a daytona. This wiring can be connected to the connector which comes from a charger body by one-touch, when attaching to the terminal of a battery body and charging. In the case
It purchases simultaneously with the battery charger 71199 made from a daytona.
This wiring can be connected to the connector which comes from a charger body by one-touch, when attaching to the terminal of a battery body and charging.
In the case of purchase of the battery charger of a daytona, if it purchases together, he will think that it is good.
The direction which owns two or more set motorcycle is good to buy it by the number.
View detail