Reviews
The quality of the product itself is good.
It is fastened with a string.
If you tighten the strap in the wrong direction, it may tear.
When tightening the strap, be careful not to tear the opening.
The cushioning has improved and the quality of the product itself is good.
I would like to recommend it to anyone who feels burdened by fancy, genuine sheets.
-------------------------------------------------- -------- It is fastened with a string. If you tighten the strap in the wrong direction, it may tear. When tightening the strap, be careful not to tear the opening. The cushioning has improved and the quality of the product itself is good. I would like to recommend it to anyone who feels burdened by fancy, genuine sheets. Powered by Google Translator
View detail
I had a hard time attaching it to the katana in '23.
At the time of purchase, webike said that it can be mounted on all katanas, but it can be mounted immediately for 19 to 21 years, and requires some processing to be mounted after that.
I really like the product itself, but I'm giving it one star because I have a hard time with my intestines.
The sound doesn't seem to be much different from the stock version. Please note that it is not recommended if you want loud sound. -------------------------------------------------- -------- At the time of purchase, webike said that it can be mounted on all katanas, but it can be mounted immediately for 19 to 21 years, and requires some processing to be mounted after that. I really like the product itself, but I'm giving it one star because I have a hard time with my intestines. The sound doesn't seem to be much different from the stock version. Please note that it is not recommended if you want loud sound. Powered by Google Translator
View detail
Here’s some fitting instructions
I've been using throttle paddles from various manufacturers over the years & while typically effective in general- they tend to either be low cost & cheap looking/a bit flimsy~ or expensive and good quality plastic & strong, fairly rigid construction. This product is a curious one. It's price is very low & the plastic quality is excellent. The only real issue is that it uses a rubber strip instead of a rubber tube to fit between the handlebar grip & the paddle body to provide friction & prevent slippage. ~ this rubber strip is challenging to install as it needs to be initially fed inbetween the grip & the paddle..I recommend a pair of long nose pliers for this task. Once some of the rubber strip is partially fed in- turn the paddle & it will pull the rest in. Take your time setting up the paddle- start a little low & working it up in increments. If you rotate it too much the rubber strip will come out & you'll need to start the whole process again. On the bright side- once it's properly set up, it won't slip at all. View detail
looks great
Looks great and definitely made my instrument cluster look alot better. Just unfortunate theres no official way to put in the Honda Helix logos into that aftermarket cover. But otherwise looks good View detail
Priced right and no damage to the adjuster.
Is a great tool to adjust the rear shock compared to using a screw driver and a hammer.It would have been extremely difficult and time consuming to preload springs without this tool.Recommend getting one to add to your collection.very handy tool, very good price.add;fits with exhaust clamps,triple tree nuts of old 50-250cc motorcycles View detail
Would recemond these to mx or woods users, have used them on other bikes and they hold up great!
I bent old handlebars and bought these. Did a lot of research and wanted a quality handlebar. I really like them.Really good quality. It looks good and feels good. These bars build confidence.Highly recommend Renthal. View detail
Great safety and looks product
nice and shiny replacement for the old tattered cloth renthal pad i had for years.Pad fits well on ktm. I don't love the graphics but needed it to replace the one on the bike that was falling apart. Pretty stiff foam too. I'm not sure I want my face to hit it.I wanted to buy an original product instead of a poor quality fake.Price seems high for what it is. View detail
Great product, great upgrade
Malfunctioned stock caliper on a so this was a better option to go than OEM.I didn't expect much when I bought it.First try was in the long ride and I wouldn't spend this much money for the extra performance if I didn't have to.That was a game changer, especially on steep downhills.Brake precision and overall performance is far better. Braking at speeds above 100kmh made a big difference.braking distance is now noticeably shorter.Worth every penny. Also looks better on the bike than I expected. View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Unbreakable Lever
I installed it on my gasgas EC250 which I always use for forest road touring.
With the NORMAL Lever, the supplemental grip was not comfortable, so I purchased this Lever.
As a result, the grip is improved and Lever is easier to operate.
It is also foldable, which makes it difficult for the lever to break, and reduces the number of problems when touring on forest roads.
The quality is very good and Parenthesis good Lever.
However, the price is very high, so the cosmetics are not very good.
View detail
Lever and hand protection
I installed it on my gasgas EC250 which I always use for forest road touring.
I often fall down while touring on forest roads, and I installed it to avoid damage to the lever.
In my experience, with the attached Clamp, the hand guard moves quickly and needs to be corrected every time it falls,
I've been using it for a while, Hand Guard Mount Bar Clamp Type We use a combination of the two.
I recommend the Large variation.
View detail
Fits: KTM XC250, KTM SX250, KTM XC300, KTM SX300, KTM EXC-W250 TPI, KTM XC-W250 TPI, KTM EXC-W300 TPI, KTM XC-W300 TPI, HUSQVARNA TX250, HUSQVARNA TX300, HUSQVARNA TE250i, HUSQVARNA TE300i, GASGAS EC250, GASGAS EC300
For Chamber and body protection
I installed it on a GasGas EC250 2023, which I always use for forest road touring.
Installation was quick and easy with Bolt On.
If you put on this product, which is a combination of Under Guard, Link guard, and Chamber Guard,
It protects the body of the car well even if it is slightly unBrown.
Recently, I have been interested in the world of hard enduro from forest road touring, and I have been riding in streams with large rocks,
The number of opportunities to run in gullys is increasing, and with Peetec's Guard attached, there is no chance of damaging the engine, chamber, body, links, etc., even if the vehicle is unbroken.
The only drawback is that mud and leaves can get into the Guard.
This could be improved to a Large width by machining a thin aluminum plate to prevent mud from getting in.
With this level of protection, I feel that the 40,000 yen expense is justified.
View detail
Fits: HONDA GROM, HONDA DAX125, HONDA Monkey125, HONDA Monkey125
What special tools are required?
While working according to the Installation Instruction Manual, a special TorqueScrew tightening tool was required, although fortunately a hand-held tool of the same type could be substituted.
I think that a regular commercially available screw would be sufficient for this 4-point screw.
View detail
Goggles with the best cost performance
I always participate in Forest Road Touring and sometimes HardEnduro Race.
I had previously purchased the same Goggles in White, and I also purchased these in a different color for my Red Helmet.
I love that they are inexpensive Goggles and I can have them in every color of Helmet.
View detail
Purchased for forest road touring.
I always participate in Forest Road Touring and sometimes HardEnduro Race.
Until now, I have never had to wear goggles, but now that I have decided to participate in the Race, I must wear goggles.
When I actually put them on, my eyes were well protected and I was able to run without fear and aggression because they protected me from bushes and branches.
In addition, I tore off the ventilation sponge so that I can actively replace the air, and I am satisfied with the Large change because it is almost fog-free. I also put on Bell Hammer's Bell Top coat to prevent fogging.
I will use GunGun as it is easy to use and I will use it as a consumable.
I also bought Red for my other Helmet because of the many color variations!
View detail
Nicely made and very useful
Pretty good at holding motorcycle parts or softer metal you don't wish to mar with the vice teeth. I purchased 2 different jaw pads. Plastic and metal. All were very similar. They give multiple ways to hold part secure with damage. Good quality and durable. Retention magnets are weak though, slight bump and they fall off the jaws. Holding round rods at an angle or parallel to the teeth, not so much. They will warp if given too much torque. View detail
A must have tool for any tool box.
This tool comes in handy for all my little jobs and some big ones.The depth of insertion of the socket allows the optional setting of fixed and pivoting.it can be used as an extension bar.It is pretty sturdy and well made.The Japanese quality shines through, the feel in the hand is incredible. It's quick to use the handle is large enough to get a good amount of torque on the screw or nut being tightened. so far the tool has been very durable and not let me down while being used. View detail
Cracks!
When I replaced the brake fluid, I remembered that it was cracked and decided to replace it. Although it is not something that should be replaced frequently, the area around the brake can be fatal, so if there are any cracks, it should be replaced. View detail
Normal good
Narrower and lower than OEM, recommended for those who do not want to use Separate handle.
However, I don't like the fact that the holes have to be increased to make the desired position due to the holes being machined.
I want it to be without Hole.
View detail
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Nice, not too naughty
I was looking for a YB aperture and after comparing and contrasting, I bought it.
Not too naughty for z900rs, Large person squeeze.
Both city driving and Touring have become easier.
The only thing is that the Plating Process does not produce any color.
At least give us Black color as well.
View detail
Type coming to the front
I bought this one to correct a mistake in selecting the Fat bar, which resulted in a low and distant Handlebar.
In my case, the installation method is a bit special, so I won't go into details, but it is firmly attached, so I have no concerns about the product. As expected of ZETA.
View detail