Reviews
Fits: SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman LIMITED
The sound has become quieter.
I bought a used SKYWAVE (CJ45A) at a flea market in August 2023, and I felt that the sound was too loud for an OEM exhaust system. I was surprised that the sound became quieter after replacing the exhaust system with this product. I am very impressed and thankful. View detail
Corresponding to CBR250RR2023
I purchased it after checking the Parts List and it worked fine on my CBR250RR2023. However, the Slip-on Silencer I purchased came with a Honda OEM Gasket. (Lol) View detail
Fits: SUZUKI SKYWAVE SS, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman LIMITED
Exhaust sound like a new car.
Arrived 3 days after ordering. The O2 Sensor was left in place, the exhaust system was installed, 3 bolts were removed, and the Gasket was installed. It was as if it was a new car (I don't know!). It sounds like a new car (I don't know!). Now I don't have to worry about my neighbors when I go to work in the morning. I wish I had replaced it earlier. View detail
Good cosmetics if you don't take it on and off often.
[How is it used?
Used on OEM Exhaust pipe and Silencer joint of MainMotorcycle's XJR1300C that had been inspected.
The Exhaust System itself is the same as the normal XJR1300, so Gasket could be used normally.
How was your experience with it?
The exhaust leaks were normally prevented, and this black shiny joint gasket from KITACO was able to keep the exhaust from leaking once it was used.
Even if successfully removed, it is basically non-reusable. This is a type of Gasket that is quite crushed and sealed.
How did it compare to other products?
I decided to go with KITACO because the OEM Product costs 2300 yen.
However, the OEM gasket is a metal type that can be used over and over again as long as the shape does not get messed up when tightened.
I think they are essentially disposable. In fact, it can be used normally.
So it is cosier to buy OEM if you have to wear it on and off a lot.
[Points to note]
Anyway, Gasket sticks to it and I can't peel it off. I wish you could do something about this.
Even if I wanted to make a new Gasket, it just falls apart and won't come off at all.
Can it be removed quickly if I apply something to it before installation?
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Thicker than OEM
Purchased to install YOSHIMURA's Slip-on Silencer.
Since the vehicle was still new, I thought about reusing the one that had been installed, but I replaced it with a new one just to be safe.
It was thicker than OEM, and the insertion was quite snug, with no way for the exhaust to leak, so much so that a Clamp band was not necessary.
View detail
Necessity for Exhaust System Replacement
Used for Slip-on Silencer, no problems View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
It was quintessential accuracy.
Because the gasket was old when replacing the Exhaust System, I bought a new one.
There is no waste leakage after replacement and the performance is similar to OEM.
I would like to use KITACO's Gasket when replacing it with another vehicle in the future.
View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Accuracy is very good.
Although I bought it at the time of Exhaust System replacement, I have not actually used it.
I was just not sure, that was a mistake, but it came with the Exhaust System.
I compared the two and the dimensions are the same, and the included Gasket is Exactly.
There are no disposal leaks, and I believe it performs just as well.
The quality of the item is fine, although it will be kept as a spare for the next time I need to replace it.
View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Just too big? Is this normal?
Installed in the OEMSilencer of SR400
It was so JUST too much on the Silencer side that I had to pump it with my flat hand to get it in That's how Just size
I had a hard time getting the Silencer with the Gasket on it into the Pipe, it was too JUST too much It took a lot of trial and error, turning the Silencer and slapping my buttocks with my hands, but I managed to get in I felt it was that well sealed
If you're a PRO, do you know the hang and can get in easily? This part is surprisingly important, so if it's incomplete, it can cause a weird stall (2 o'clock intake? air?) I felt it was more recommended to have a PRO do it carefully
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR
Purchased because there was inventory
Even OEM is OK, but I bought it because there was inventory. I firmly play the role of Gasket. Fitting is also good as OEM. I feel like inside the OEM, but ... haha
KITACO is slightly cheaper so it is better to purchase KITACO's thing better if it is cheaper any more.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR
Slightly cheaper than OEM Product
I purchased it suddenly because it was necessary to remove the Exhaust pipe when LINK, Rear suspension of sc 59 was exchanged. Size and texture are the same as OEM Product and there is no exhaust leak. I firmly play a role.
I thought about ordering an OEM product, but since KITACO was in stock, I bought it. When buying with webike it seems cheaper than OEM Product cheap.
View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Necessities
I purchased it because it is necessary for exchanging the SR 400's Exhaust System. It was good as it is not so expensive. Manufacturer can also be reliable so it is safe. View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
Replace with AfterManufacturer's Silencer
I changed it to Silencer of Slip-on Silencer so I thought it was necessary, but buy sorry but did not need to use after all, so I do not know the feeling of use. However, since it is a reliable Brand, I would like to use Silencer again when I return it to OEM. I am glad if it is a little cheaper.. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR
[Webike Monitor] Since it purchased in order to attach external Muffler, but the form by the side of a Muffler had become the form of Gasket needlessness, it was not used after all. I recommend you to place an order for it, once it checks the directio
[Webike Monitor] Since it purchased in order to attach
external Muffler, but the form by the side of a Muffler had become the form of Gasket needlessness, it was not used after all.
I recommend you to place an order for it, once it checks the direction purchased.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR
It is remembered that the original manufacturer's product was 1050 yen. I am a DREAM and regard an original manufacturer's product as an order with some occasions being placed next time. He wanted to find out whether it is different somewhere,
It is remembered that the original manufacturer's product was 1050 yen.
I am a DREAM and regard an original manufacturer's product as an order with some occasions being placed
next time.
He wanted to find out whether it is different somewhere, and it purchased.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The SUZUKI GSX1300R-HAYABUSA 2002 model was equipped. It was used when replacing a Muffler from an external Muffler to a pure Muffler for the automobile inspection. Although the Joint was lost unawares and he thought that he would not do what,
The SUZUKI GSX1300R-HAYABUSA 2002 model was equipped.
It was used when replacing a Muffler from an external Muffler to a pure Muffler for the
automobile inspection.
Although the Joint was lost unawares and he thought that he would not do what, since it was not high, he bought it.
A Fitting is perfect for.
It is perfect!
View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
It does not change that it is pure with the goods as expected, and they are being just fit and Brando without exhaust leakage that can trust it!
It does not change that it is pure with the goods as expected, and they are being just fit and Brando without exhaust leakage that can trust it! View detail