Reviews
A complete set and useful
Installation etc etc. I was able to install it satisfactorily well.
However, it is still relatively expensive compared to goods, I think that I could make it cheaply, as it is, at Homsen Bracket if I thought well enough.
It is pretty because the Screws, the License Plate Light, and the Coupler are complete and the angular position and the hole position are in place even if you do not think about anything.
View detail
Rear view is now Stylish
I think that the shape of briefing is not bad and it feels nice. Quantity Seat Cowl : Pair (for Left and Right) I wrote it in the Instruction Manual for removal, but it was possible to install it only with Right Side. View detail
It is Imechen
Because my car is a relationship for almost ten years, I wanted to change the atmosphere of the appearance soon and bought it. (2007_R1)
Comparison with other company's Kit, price and OEMBlinker (Use of Y's Gear LED) I decided to look at the settings that I can use.
Construction is removed according to instruction, about 1 hour if assembled with one shot (OEMBlinker insufficient pain) I think whether it is. But,
In my case, RearSeat has Body of ETC and Sports carrier of Renntec, thanks to Large surgery w
This time it was done that the Washer must be attached to Nut, Screw other than Screw with Taper
Also, Edge of the hole through which Wiring of the License Plate Light passes is too sharp, it becomes uneasy, it becomes uneasy and it has once scooped to win the Vinyl Tape after completion.
Only place here is to add Rubber, and I want you to get rid of Edge.
Also, although this may be only me, "Features image" It was a thing that did not know that Reflector is not attached because it passed through without seeing it.
"RightClick" of "Display only images" I went to see it, so I installed it after a week. By the way, Reflector selected Type-3 Slim.
For Aluminum Press molding, PartsEdge is sharp. Black Painting makes it easy to scratch and stand out. When assembling, I think that it is good to make a working space with Dustcloth, Tier Ball, etc. so as not to hurry to scratch it when unraveling.
I do not get tired of it yet ~ R1 is fun.
View detail
I can do it with Bolt-on
I can do it with Bolt - on, but I think that it will be a hard time to install it by unfamiliar people.
The Instruction Manual was hard to understand, it took about an hour.
(It took 30 minutes by the thing of another company until now). )
Making was Large strange, I liked it very much after installation.
I wish I could make the Instruction Manual easier to understand a little, I wish I could have explained the explanation of Wiring something.
View detail
Making ZX-6R a Fender Eliminator
ZX-6R installed in 15 years.
It is cheaper than other Manufacturers and has a License lamp.
Blinker ported OEM Product, but fitting the part of Rubber was quite Large strange.
Feeling attached Refreshing around Rear, with a feeling of rigidity and unbreakable feeling.
View detail
Surprisingly large change in Large
Quality is good. The angle of Number is also good feeling. I think that manuals are also good as they are kindly separated. However, if you are able to exchange Handlebar, you think Large is sturdy, but you may worry if you do not have much experience. It took longer than I expected. Also, although it is Rubber mat to prevent invasion of water coming in, it is a great effort to cut and paste while thinking about Size.
Also, because it tightens Bolt in a rather narrow place, it is impossible with only an on-board tool. There is no complain if it is done, it is clean and it is clean.
View detail
Too clearly?
Because Rear's overhang is small, I wonder what I am supposed to think but I made it a Fender Eliminator.
Although it became cool and refreshing, I am wondering how much there is mud splashes, but as I thought it is also Large thing again ...
View detail
Fender Eliminator
Used in Ninja 250R
Previously I used Fender Eliminator made by Hotbodyes, but due to ABS the License Plate attachment part broke so I changed my flight.
I think that installation is possible if it is 1 hour as long as there is a thing around Rear.
Product is Material : I think there will not be cracks like ABS or FRP products because there is thickness in Aluminum.
This time we used Blinker, License Plate Light, so we did not use some Parts, but it is quite satisfying and satisfying.
Since there is a gap on the mating face with Cowl, it is a place where the splashing mud seems to invade under the Seat in the rainy weather.
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
Fender Eliminator Kit
Although the OEM is now in a fashionable form, it has made its appearance worse and made it into a Fender Eliminator
price - Considering the appearance I made this product classic in FZ
- Good looking Refreshing Parenthesis OK
- 0. 6 kg weight reduction
As a Fender Eliminator, muddy adds Large, and Fender is added downwards by hand
View detail
It looks pretty refreshing.
Installation Instruction Manual is written as work time 0, 5 hours but developer etc etc. Working in 0, 5 hours is impossible unless you are familiar with the exchange method!
I started playing Motorcycle for about 15 years and touched MT07 for the first time but it took about 1.5 hours.
As I follow the instruction manual, there is a missing place so I can not complete the work, I need to think about myself. Where it is not tightened properly with temporary tightening etc. etc. I am going.. When should we close it?
It is meant to fix the OEM mudguard undercover part with the attached short Fastener, but as Cover will be removed with just a little effort, Screw stopper etc. It seems necessary to process.
Although there are such dissatisfaction points, finish and product texture etc. etc. I think that it was nice to exchange it.
I think that MT 07 is released as Fender Eliminator and Bikini cowl as steel plate Custom, Custom premise.
View detail
From the side
Impression that made considerably Refreshing compared with OEM. There is strength of the product, it looks strong.
Installation is also accompanied by Instruction Manual and is easy to understand.
But MT-07 is not an easy Bolt-on.
I can not install it unless all Rear's exterior is removed. It is also difficult to install Blinker.
Because it will be installed with a part of OEM Cover removed, it is difficult to clean dirt. (Because Rear Fender does not work, it is not a problem of this product)
It is necessary to separately purchase Reflector.
I think I need to pay attention to this.
View detail
Clear look
Kawasakizx 6r 16 years installed in MODEL. Since 13-year MODEL only changed Coloring, it attached without problem. Because the structure is also very simple, I think that beginners can install without hesitation. View detail
CB750 RC42
Buy NORMAL chopper as Reflector part opens.
I think whether it depends on the car model, but it was very Large strange to remove Normal fender for RC 42.
The installation of the Fender Eliminator situation was not difficult
BlackScrew which was originally attached is hard to turn around because of paint,
I exchanged everything invisible to Stainless Steel.
View detail
Large classic
A few years have passed since wearing, but no trouble has occurred
It is troublesome to install, there is nothing to be lost and there is no problem.
Jumping up angle of Number after wearing is also favorite just exactly.
View detail
Can install without hesitation!
Regarding the contract
Although it is not a detailed one, it was able to be installed without problems! However, Nut's problem is that some tools are required.
Feeling of use
Originally there was a jump, so there was no hesitation towards Fender Eliminator, but after switching to Fender Eliminator sand began to stick on Seat (Lol)
View detail
Fits: YAMAHA FZ-8 FAZER, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-8
Refreshing also made it safe to attach safely
Instruction Manual before installation I thought that A little is too easy, but I can set it to Smooth and it looks satisfying.
How to remove RearCowl etc I would like to write the mounting method a little more concretely A beginner is difficult little A?
View detail
Refreshing around Tail
I bought it because I did not like License Plate's angle and Normal fender.
Installation was complete without problems while watching instruction.
Refreshing around Tail, the angle of License Plate is also good.
It is good to be able to use a tool holder.
View detail
ACTIVEActive:Fender Eliminator Kit
Suddenly clear from OEMFender, I feel first confusion, but I am cool as I am familiar. Somewhere that makes you look like a Compact something, I feel a little of the atmosphere of GORILLA. View detail
MT-07 ACTIVE Fender Eliminator
I installed the ACTIVEFender Eliminator.
Things are solid, LED light is good with beautiful white color light.
Be careful as Reflector is required separately for Japanese Vehicle Inspection Correspondence.
In order to install it, you have to remove it to Rear cowl, so the working process will be more. Since the image Print of the attached Instruction Manual is cumbersome, you may be confused if you are not familiar.
I can recommend it because the back is neat and the color is also matched to the car body ~ (* - ∀ - *)
View detail
Even amateurs can install
Understanding of installation can be done quickly with Parts having simple items in it. Working time is about 15 minutes. The enclosed installation photo
I do not understand well but a slight confusion in the orientation of the gold tool - -
After that Reflector was not sold separately and I almost forgot. After installation it is normal not feel bad with a natural feeling.
View detail