Reviews
Used for PositionHazard
The switch of PositionHazardRelay harnessKit was broken due to deterioration, so I replaced it with this one. 3-position switch (ON-OFF-ON) was needed, but it was a little difficult to modify due to the special wiring. It is usable for now, but I wish it had a more sophisticated design. View detail
There are many similar products, but this one is enough!
The Harley Shovel's Blinker stopped working, and after investigating a broken ball and a faulty Relay, I thought it was a faulty Switch and purchased this product.
There were various similar products in other Brand, but I chose this one with good cosmetics.
It was easy to replace as it was almost identical to the Blinker switch that was already on it.
The new one still works well with the Switch and the Blinker lights up well after installation.
Horn is using a different switch, so I put insulated tape around the Horn wire and Tie Wrapped it to the other wires.
The texture of Plating is good, so I am satisfied.
View detail
The product is great. Nice chrome on top with plastic on bottom. The button very good. The shipping take a little bit long, about twenty days. View detail
ของมาถึงเร็วมาก เวลาสอบเจ้าหน้าที่ให้ข้อมูลดีมาก สินค้าดูดีกว่าที่คิด จะติดตามสั่งซื้อกับทางค้านเรื่อยๆครับ ส View detail
With the renewal around Handlebar
Other companies also had similar products, but purchased this because it was cheap.
There is no manual attached to the manual so please refer to Manufacturer's website.
Do not forget to prepare the Wiring diagram of your own vehicle for installation at DIY.
The structure is simple, but making is a little cheap. I think that it is a price equivalent.
Since it is not Waterproof Specification, concern about durability. In addition, the resin part also has considerable cheapness.
Does not expect excessive, is not it good for Style-oriented Custom.
Not recommended for those who do Wiring's first work for the first time.
Us, installation. Operation verification - I did it until the trial run, but after all I did not like the cheapness and restored it ...
For your information
View detail
Push Switch does not work
Two push switches are attached, but it does not function
Even if you do not have a Wiring diagram, making it as easy as you can see inside
Since Wiring of Push Switch is Body ground, it does not turn on if it is hand painted with Black paint
I think that if you peel off the paint, I will energize, but I have not tried it
In this time I will stop using it and embed Switch in Handlebar
As it is also in Review of other people, it is very simple making
You can adjust the Length by exchanging conductors
Although it is inexpensive, it is not a thing that can be attached, so I can not recommend it to those who do Custom of electrical equipment for the first time
View detail
Minimum but easy to use. It is easy to cause poor contact with moisture.
I used it for SR.
It is more overwhelmingly easier to use than the Toggle switch etc. In Small TypeSize
Feeling that this is an easy-to-use limit.
It is durable Large unexpectedly if I thought that Material itself will deteriorate quickly as price.
One year complete Blue empty storage, but the resin part is not altered at all.
I could stain a little with Uniqlo plating of installation Band but it can not be helped.
Wiring is difficult and only Blinker and Horn can be used after all.
The lower switch is Passing or Cell (← I do not have it in SR) Only
I wonder if it can be used.
Because I felt useless, each individual CEVReplicaSwitch could be good
I feel it..
The difficulty is easy contact failure. No Guard Because it is a tactic, water accumulates
It is good to have difficulty, but the contacts are cloudy.
It is complete by packing WAKOS and AZ's Urea grease inside
solved.
Urea grease 's Waterproof nature is convenient at such times. Try it.
View detail
Handlebar is neat
Refreshing around Handlebar with Compact.
If you use Electroscopic Tester for installation, you can think that you need ingenuity of yourself to some extent if you can wire the wire securely, but there is nothing particularly difficult.
22 in the other review. Although it was stated that if it is 2mm domestic handlebar it could not be closed and we rounded round and round, but since I could fix it so that it would not turn around if it closes tightly, is it an individual difference?
However, since there is a width widely unexpectedly (GripLimit can not be brought up when thinking about operating Blinker switch) Since the width is not different from that of the OEM's Switch box, the handling of the Handlebar can not be done so far. However, Switch seems to be refreshing Small, Cost performance is also high, I am satisfied.
It looks cheap as the price is, but its appropriate feeling is also cute
View detail
Blinker switch exchange!
I replaced the Blinker switch with the Custom of the SR 400 Initial Model.
Although some Wiring processing is required,
It is relatively easy to install.
I was satisfied with Large clean looks.
One difficulty is that depending on the shape of Grip,
Grip processing is required.
Recommended Switch for Classic style Motorcycle.
View detail
In order to make product TRIAL Motorcycle Beta EVOmade from Italy2T into Touring-Trial (Touring TRIAL = public road run is possible) specification, it purchased as an object for the Switch of a Blinker & phon. Although appearance is also small
In order to make product TRIAL Motorcycle Beta EVOmade from Italy2T into Touring-Trial (Touring TRIAL = public road run is possible) specification, it purchased as an object for the Switch of a Blinker & phon.
Although
appearance is also small strong and falls over, for the moment, it has not broken.
Although equivalent goods are also put on the market by
another Manufacturer, even if it compares with it, a Cost performance is more preeminent for the
goods here.
We recommend it strongly to Rider,
Touring-Trial group.
View detail
It purchased as a blinker switch on the touring trials of the trial motorcycle (import vehicle). It seems to be strong, and a simple and a price are also cheap and a configuration is also recommended. It is not likely to break, if it is this.
It purchased as a blinker switch on the touring trials of the trial motorcycle (import vehicle).
It seems to be strong, and a simple and a price are also cheap and a configuration is also recommended.
It is not likely to break, if it is this.
It is farewell also with loose connection!
View detail