Reviews
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Can be used for socializing.
I don't know if I will use it, but I have been wanting a "Round and round Tail" for a long time, so I bought it. I bought this one because the price is not so different from the one that is priced at about 2,000 yen from Yahoo! View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
No problems so far.
I just wanted to White the Light, so this cheap Valve is sufficient. View detail
Fits: Others
LED MeterLamp on TS185E that can be cut immediately
[Usage]
Since the OEM Product's bulb went out after about 1,000 km, we replaced it with this product to reduce the frequency of replacement.
Comparison with OEM Product
OEM (09471-12077-000)
Light intensity:LED diffuses light on the surface, so it looks brighter on a single body, but after attaching to a meter, it is about the same level.
Cost:6.5 times OEM.
(Points to note)
LEDs are polarized, so be careful about the direction of installation.
【attachment】
Easily replaceable by simply plugging it in.
View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, KAWASAKI KLX250, KAWASAKI GPZ400, SUZUKI volty, SUZUKI volty, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
MATSUSHIMA Glass Tube Fuse very identical to the OEM ones
previously I bought the OEM Fuse from the webike shop ,this set very identical to the OEM ones.same lenght and same diameter and well secure the package .for the price well worth every yen because couldn't find this set anywhere else for the cheap prices.I bought 3set for spare so I can keep it when I needed one.Direct fit for tw200 early modle fuse box. works great .I can highly recommended this product .WEBIKE Shop is one of the best shop for buy finest quality and rare products for cheap prices.webike shop offers great service.so anyone can buy product with confident. webike packaging is awesome.they secure the items inside the box with the bubble (doesn't matter the product size,they do it anyway ) wrap for further protection.I highly recommended.WEBIKE.. awesome people and 5star shop. .Thank You !!! View detail
Made in Japan for peace of mind
There are plenty of cheap Valves out there, but Valve almost always uses M&H Mats Stripe. I don't remember Trouble until now.
G18 BA15S, but the Valve tip is Lens-like and it is supposed to emit a sharp light.
I certainly feel that way.
Made in Japan.
View detail
For NSR250R MC18
I used this product for a tail lamp to save power consumption for my old 2nd motorcycle. I purchased this and L8186 at the same time and installed them because the direction of the pin is opposite to the direction of the light as shown in the description of the product. View detail
JAPAN's peace of mind!
I used it for a Blinker Bulb and installed it to save a little power since I am adding Motorcycle navigator, USB, Fog Lamp, etc. I am happy that it is 40% brighter than OEM and saves electricity! View detail
Fits: Others
Bright! Expect durability
Used for SUPER CUB110JA59.
The previous SUPER CUB110JA44First Model Type had a Wedge type Tail Bulb, so I chose the same Manufacturer's LED Bulb again because I had been using LEDs for 6 years without any complaints.
As shown in the Manufacturer's compatibility information, I bought Type L8184 because License Plate Light is the lower type.
It was easy to install with no problems.
Since the replacement only requires the removal of the tail lens, the work can be completed in 5 minutes.
When installed, the Tail, Stop, and License Plate Light each emit a separate light, and this should be acceptable in terms of traffic laws.
The brightness and sharpness of the lighting is also that of the LED Merit, and I am sure that this will be well recognized by following cars.
I expect it to be durable enough to be used for more than 6 years without bulb breakage like the last time.
The price is many times that of a regular light bulb, but the peace of mind you get is more than worth it when you consider that you ride to work every day.
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Easy Pon-mount LEDs
LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
Fits: その他
Headlight with Position
Headlight with Position, only the Headlight was LED, so the Position was changed to LED as well.
The brightness, however, is not uncomfortable.
They also have a diffusion Type. (Prices are a little high) 。
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Fits: Others
Visibility Up
Since it is a scooter, the flickering during idling, which is not stable, is unavoidable, but it is brighter and more visible than the OEM. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
White light!
The LED Bulb can be attached to the bulb, as the name suggests, and the cosmetics are good. View detail
Unseen 25mm
I purchased this as a spare fuse for CUB90.
I don't know if the previous owner skipped it or lost it, but it was not attached. I have installed some external parts for the electrical system, so it may come in handy.
This time Fuse is a Glass tube.
When I checked what I received, Element is thread shaped.
The product description says that the shape of the Bracket varies depending on the time of production. I am not so sure about the shape performance of Element. I think it is good if it can be used normally.
The 7A25mm is also Exactly suitable for Fuse holder. 25mm is not so common, so mail order is a great help.
GlassTube Fuse is a Quantity:After 10 years of use, the connection between the glass and the bracket may become weak due to vibration, and the glass part may start to rotate round and round. This phenomenon is caused by the quantity of the glass in the holder of the Spare fuse.:This is common in Fuses that have been set. It is better to be careful when white corrosion appears on the gold part, although it can be energized.
View detail
Normal is fine.
Tail lamps that are always on are consumable.
Stop-lamps are still alive but replaced immediately when noticed to avoid maintenance failure due to trivial things.
We had thought about using LEDs, but we concluded that Standard was the best choice due to its cost performance and reliability.
In the case of DJEBEL, the OEM installed Carrier interferes with the approach of the Tail lamp cover to the Screw. This is where SEA BASS comes in:remove the rear screws from the carrier, loosen the front screws, and stand the carrier up like a Gal wing, and the replacement can be completed in a few minutes.
The durability of the bulbs is a matter of luck, but since it is a product of FOR JAPAN MODEL MANUFACTURER, it is safe to use for the time being.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Headlight LED
Installation was easy. It was brighter than I expected. View detail
Trusted Pine Stripe
[How is it used?
I was looking for a KITACO Durable Lens Mini Blinker Set (https://www.webike.net/sd/372536/) because the ball had snapped.
12V-8W [T-10] He is a very rare character, so I thought, "No way! I was about to lose my temper, but I found this 12V-10W [T-13] I got the information that this product can be substituted with
Was the one you received as per Image?
It arrived in the familiar Pine Stripe's Packaging. It is very secure.
How was your experience with it?
They lit up with no problem.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Valve of the Unbreakable lens can be replaced by removing the Lens, but it can also be replaced by pulling out the whole Socket from the back.
Also, some people do not know this, but if you touch the Valve with your bare hands, the sebum from your fingers will adhere to the Valve, which can cause it to heat up easily and shorten its life. 。 Therefore, it is best to wear work gloves or military gloves to protect your hands and fingers.
View detail